Molecular docking analysis on antifungal properties of acid condensate produced from palm kernel shell

The rise in the number of fungi that resisted antifungal action is of serious concern nowadays. In this study, the potential of acid condensate (AC) produced from microwave-assisted pyrolysis of palm kernel shell (PKS) was investigated for its antifungal properties through molecular docking evaluation. The phenolic-rich AC was determined for its chemical compositions using the GC–MS analysis where compounds with the highest phenolics content were further evaluated (using the Autodock Tools 1.5.7) for its potential enzymes/protein binding properties. From the GC–MS analysis, catechol, guaiacol and syringol were present at highest percentages. This directly correlates with results obtained from the molecular docking works where all these ligands managed to bind (indicated by H-bond, π-stacking, hydrophobic interaction) with some of the amino acid at the active sites which indicate its potential to inhibit substrate binding of this enzyme. As a conclusion, this study demonstrated the potential use of AC from agricultural biomass such as PKS as a natural-based antifungal agent that can reduce environmental and health impacts.     

Critical success factors of sustainable manufacturing practices in Malaysian automotive industry

The purpose of this study is to examine the critical success factors of sustainable manufacturing practices (SMPs) in Malaysian automotive industry. The questionnaires were designed and distributed to the 50 respondents. The pilot study sample consists of 26 respondents from 50 questionnaires, with an average response rate of 52%. The results of reliability analysis show that social responsibility is critical factor influencing the direct SMPs implementation success. By implementing SMPs in Malaysian automotive industry, it can assist company to improve the quality of management. Thus, this study recommends that the future research explore the influence of SMPs on sustainable performance in Malaysian automotive industry.     

Nitrate occurrence in the groundwater of the Loukkos perimeter

This study assesses the occurrence of nitrate in the groundwater beneath the R'mel area of the Loukkos perimeter (north-west Morocco), which covers an approximate area of 2,560 km2 and is located between the towns of Ksar el Kebir and Larache. It also borders the Atlantic Ocean. Groundwater supplies are the principal source of drinking water in this region and there is no public drinking water network in the rural area. This perimeter has a population of about 500,000 inhabitants of which the rural population represents 60%, many of whom have depended on and used the water from the aquifers for many years. The inhabitants and farmers depend on the groundwater supplies for drinking water, crop irrigation and other uses. The plain provides the ideal conditions for agriculture and the use of chemical fertilisers has been increasing. In this study, 53 water samples were collected from wells and springs. Each well or spring was sampled once or twice during 1998-2000. Nitrate concentrations ranged from extremely low up to 144 mg L(-1). Nitrate concentrations exceeded the maximum contaminant level (MCL) of 50 mg L(-1) in 12 of the 53 groundwater samples (23%), whereas 31 of the 53 samples (58%) had nitrate concentrations of less than 25 mg L(-1).     

Microplastics in freshwater ecosystems: a recent review of occurrence,analysis, potential impacts,and research needs

Environmental Science and Pollution Research - The utilization of plastics has now become a threat to the environment as it generates microplastic particles (<5 mm in size). The increasing...     

Encapsulation of nonmetallic fractions recovered from printed circuit boards waste with thermoplastic

The present work includes a process for encapsulation by combining substantially simultaneously dry nonmetallic printed circuit boards (PCBs) powder and recycled high-density polyethylene (rHDPE) in an extruder to form a homogenous matrix. The extruded materials were then molded into standard tensile, flexural, and impact properties testing specimens. Nonmetallic PCB mainly consists of large amount of glass fiber–reinforced epoxy resin materials. Incorporation of 50 wt% nonmetallic PCB in rHDPE matrix had increased the flexural strength and modulus by 35% and 130%, respectively. Tensile strength reported to be constant without much improvement. However, the Young’s modulus has increased by 180%, with incorporation of 50 wt% nonmetallic PCB. The addition of 6 phr (parts per hundred) maleated polyethylene (MAPE) resulted in 2-fold increase in tensile and flexural strength. Regarding the leaching properties, Cu was identified as the metal that leached at the highest level from the raw nonmetallic PCB, at 59.09 mg/L. However, after the nonmetallic PCB was filled in rHDPE/PCB composites, the concentration of Cu was reduced far below the regulatory limit, to only 3 mg/L. Thermal properties of composites were studied, and it was found out that incorporation of nonmetallic PCB fillers in rHDPE resulted in low thermal conductivity, whereas mechanical strength of the composites showed maximum improvements at 220 °C. Overall, the encapsulation technique using nonmetallic PCB waste has formed a monolithic waste form that provides a barrier to the dispersion of wastes into the environment.

ImplicationsNonmetallic materials reclaimed from waste PCBs were used to analyze the chemical composition, and it was found that nonmetalllic PCBs mainly consist of glass fiber–reinforced epoxy resin materials. With such millions of glass fibers in nonmetallic PCBs, there are mass-excellent supporting bodies that enhance the mechanical properties of composites. In fact, utilization of nonmetallic PCB waste as filler in composites can dramatically restrain the solubility of heavy metals in leachate solution, thus making it safe to be used in practical products.     

Effect of Curing Temperature on Mechanical Properties of Bio-phenolic/Epoxy Polymer Blends

Journal of Polymers and the Environment - Nowadays, researchers continue studies for alternative materials to replace the redundant petroleum-based products. The combination of various polymer...     

Removal of mercury(II) from aqueous solutions using the leaves of the Rambai tree (Baccaurea motleyana)

This study was undertaken to evaluate the biosorption potential of a natural, low-cost biosorbent, Rambai leaves (Baccaurea motleyana), to remove trace amounts of Hg(II) from aqueous solutions. It was found that the amount of Hg(II) biosorption by Rambai leaves increased with initial metal ion concentration, contact time, and solution pH but decreased as the amount of biosorbent increased. The maximum biosorption capacity was 121.95 mg/g for an initial concentration range of 5 to 120 ppb. Overall, kinetic studies showed that the Hg(II) biosorption process followed pseudo-second-order kinetics based on pseudo-first-order and intraparticle diffusion models. Isotherm data revealed that the biosorption process followed both Freundlich and Langmuir isotherms. The value of separation factor, R(L), from the Langmuir equation and rate of biosorption, n, from the Freundlich model also indicated favorable adsorption.     

Aging of Toughened Polylactic Acid Nanocomposites: Water Absorption,Hygrothermal Degradation and Soil Burial Analysis

The environmental aging behaviour of montmorillonite (MMT) filled polylactic acid (PLA) nanocomposites (PLA/MMT) and linear low density polyethylene (LLDPE)-toughened PLA (PLA/LLDPE ratio = 90/10) nanocomposites (PLA/LLDPE/MMT) were investigated in this study. The nanocomposites were subjected to water absorption, hygrothermal degradation and soil burial analysis. Both PLA/MMT and PLA/LLDPE/MMT nanocomposites were immersed in distilled water at three different temperatures (room temperature, 60, and 90 °C) and the weight difference before and after immersion was calculated. The kinetics of water absorption for both nanocomposites followed the Fick’s second law of diffusion, where a linear relationship exists between the initial moisture absorption at any time t and t ^1/2 (the square root of time), followed by a horizontal plateau (saturation). The equilibrium moisture content (M _m ) and diffusion coefficient (D) of PLA nanocomposites increased with the addition of MMT (2 phr) and LLDPE. However, the D values of both nanocomposites decreased by increasing MMT (4 phr). The M _m for PLA/MMT and PLA/LLDPE/MMT nanocomposites increased by increasing immersion temperature (60 °C) and prolonged immersion resulted in hygrothermal degradation of both nanocomposites. The hygrothermal degradation studies showed that PLA degrades much faster at 90 °C as compared to 60 °C in both the nanocomposites. The addition of MMT and LLDPE improved the hygrothermal stability of PLA in both nanocomposites. Soil burial test revealed deterioration of impact strength in all samples while the rate of biodegradation was retarded in the presence of MMT and LLDPE.