Inherent risk assessment methodology in preliminary design stage: A case study for toxic release

At preliminary design stage, process designers normally lack of information on the risk level from process plant. An inherently safer process plant could be designed if the information of risk levels could be known earlier at the preliminary design stage. If the risk level could be determined, there is a possibility to eliminate or reduce the risk by applying the well-known concept: inherent safety principle. This paper presents a technique to determine the risk levels at preliminary process design stage using a 2-region risk matrix concept. A model to calculate the severity and likelihood of a toxic release accident was developed in Microsoft Excel spreadsheet. This model is integrated with process design simulator, iCON to allow for data transfer during preliminary design stage. 2-region risk matrix is proposed and used to evaluate the acceptability of the inherent risk based on the severity and likelihood rating. If the inherent risk level is unacceptable, modification for improvement can be done using the inherent safety principles. A case study has been carried out to illustrate the benefit of applying this newly developed technique. It was successfully shown that an inherently safer plant could easily be designed by applying this technique.     

Social and hospital costs of patients admitted to a university hospital in Brazil due to motorcycle crashes

Objective: This study aimed to investigate the social and hospital costs of patients treated at a public hospital who were motorcycle crash victims.

Method: This prospective study was on 68 motorcycle riders (drivers or passengers), who were followed up from hospital admission to 6 months after the crash. A questionnaire covering quantitative and qualitative questions was administered.

Results: Motorcycle crash victims were responsible for 12% of the institution's hospital admissions; 54.4% were young (18–28 years of age); 92.6% were the drivers; 91.2% were male; and 50% used their motorcycles as daily means of transportation. Six months afterward, 94.1% needed help from someone; 83.8% had changed their family dynamics; and 73.5% had not returned to their professional activities. Among the injuries, 94.7% had some type of fracture, of which 53.5% were exposed fractures; 35.3% presented temporary sequelae; and 32.4% presented permanent sequelae. They used the surgical center 2.53 times on average, with a mean hospital stay of 18 days. The per capita hospital cost of these victims’ treatment was US$17,481.50.

Conclusion: The social and hospital costs were high, relative to the characteristics of a public institution. Temporary or permanent disability caused changes to family dynamics, as shown by the high numbers of patients who were still away from their professional activities more than 6 months afterward.     

Big data and predictive analytics to optimise social and environmental performance of Islamic banks

Environment Systems and Decisions - Regardless of known as environment-friendly entities, Islamic banks indirectly impact the environment through their clients’ engagement and slow response...     

A systematic literature review of deep learning neural network for time series air quality forecasting

Environmental Science and Pollution Research - Rapid progress of industrial development, urbanization and traffic has caused air quality reduction that negatively affects human health and...     

Toxic and essential elements in blood from delivering women in selected areas of São Paulo State, Brazil

This study was designed to evaluate the degree of environmental contamination and possible exposure of pregnant women to toxic elements in seven selected areas of S?o Paulo State, Brazil. The overall median concentration of Mo in maternal blood was 0.53 μg L?1, highly significant differences found between sites (p < 0.0001). Cd was found to be low overall - 0.09 μg L?1 (0.01-0.58 μg L?1) - with mothers from the Coastal and Rural 1 sites having the highest levels (p < 0.016).Median Hg concentration was 0.60 μg L?1 (0.06 μg L?1-4.35 μg L?1); median Pb level was 16.2 μg L?1 (3.5-57.7 μg L?1) and no differences between sites were observed for both metals. Median Mn level was 16.7 μg L?1 (7.0-39.7 μg L?1), being highest in Urban 2 site (p < 0.016). Concentrations of maternal Co were found to range between 0.06 μg L?1 and 1.1 μg L?1 (median 0.25 μg L?1) and As level was 0.60 μg L?1 (0.10-3.8 μg L?1) overall, with no statistical significance between sites for Co and As. Median Se concentrations were found to be 64 μg L?1 (36-233 μg L?1), with the highest median levels found in Urban 3 site; site differences were statistically significant (p < 0.0001). Correlation for each element (between paired maternal and cord blood) was measured only in Rural site 1; significant correlation was shown for Hg, Pb, Mn and Co (p < 0.05). These findings may be interpreted as indicating low environmental contamination in S?o Paulo State, Brazil. These findings could also indicate that pregnant women have little or no contact with pollutants, possibly due to awareness campaigns carried out by public health practitioners.     

Using process stream index (PSI) to assess inherent safety level during preliminary design stage

In the current practice, safety assessment is conducted once the process design has been completed. At this stage of design, the freedom to change the conceptual design is very limited and whatever strategies to be implemented will only control the hazard. This paper reports on the development of inherent safety index known as a process stream index (PSI) for inherent safety level assessment at preliminary design stage from the perspective of an explosion. The aim for PSI is to calculate, compare and prioritize the level of inherent safety of process streams during simulation work that influences the explosion. By prioritizing the streams based on the potential for the explosion, the design engineers can easily identify the critical streams to be considered for improvement in order to avoid or minimize explosion hazards. An enhancement technique to reflect the contribution of the individual components in the mixture is introduced, which provide significant contribution to the ranking of inherent safety level of process streams. The assessment of inherent safety level using PSI is demonstrated by case studies of HYSYS simulation for Acrylic Acid Plant and Natural Gas Liquid (NGL) plant.     

Ionic liquids for the inhibition of gas hydrates. A review

The formation of gas hydrates is a major issue during the operation of oil and gas pipelines, because gas hydrates cause plugging, thereby disrupting the normal oil and gas flows. A solution is to inject gas hydrate inhibitors such as ionic liquids. Contrary to classical inhibitors, ionic liquids act both as thermodynamic inhibitors and hydrate inhibitors, and as anti-agglomerates. Imidazolium-based ionic liquids have been found efficient for the inhibition of CO₂ and CH₄ hydrates. For CO₂ gas hydrates, N-ethyl-N-methylmorpholinium bromide showed an average depression temperature of 1.72 K at 10 wt% concentration. The induction time of 1-ethyl-3-methyl imidazolium bromide is 36.3 h for CO₂ hydrates at 1 wt% concentration. For CH₄ hydrates, 1-ethyl-3-methyl-imidazolium chloride showed average depression temperature of 4.80 K at 40 wt%. For mixed gas hydrates of CO₂ and CH₄, only quaternary ammonium salts have been studied. Tetramethyl ammonium hydroxide shifted the hydrate liquid vapour equilibrium to 1.56 K at 10 wt%, while tetrabutylammonium hydroxide showed an induction time of 0.74 h at 1 wt% concentration.

     

The management of Industry 4.0 technologies and environmental assets for optimal performance of industrial firms in Malaysia

Environmental Science and Pollution Research - The integration of Industry 4.0 (I4.0) has emerged as an innovative paradigm for industrial firms contemplating environmental and economic issues....     

Experimental investigation of energy properties for Stigonematales sp. microalgae as potential biofuel feedstock

Microalgae has been considered potential biofuel source from the last decade owing to its versatile perspectives such as excellent capability of CO₂ capture and sequestration, water treatment, prolific growth rate and enormous energy content. Thus, energy research on microalgae is being harnessed to mitigate CO₂ and meet future energy demands. This study investigated the bioenergy potential of native blue-green microalgae consortium as initial energy research on microalgae in Brunei Darussalam. The local species of microalgae were assembled from rainwater drains, the species were identified as Stigonematales sp. and physical properties were characterised. Sundried biomass with moisture content ranging from 6.5% to 7.37% was measured to be used to determine the net and gross calorific value and they were 7.98 MJ/kg-8.57 MJ/kg and 8.70 MJ/kg-9.45 MJ/kg, respectively. Besides that, the hydrogen content, ash content, volatile matter, and bulk density were also experimented and they were 2.56%-3.15%, 43.6%-36.71%, 57–38%-63.29% and 661.2 kg/m³-673.07 kg/m³, respectively. Apart from experimental values, other physical bioenergy parameters were simulated and they were biomass characteristic index 61,822.29 kg/m³-62,341.3 kg/m³, energy density 5.27 GJ/m³-5.76G J/m³ and fuel value index 86.19–88.54. With these experimental results, microalgae manifested itself a potential source of biofuel feedstock for heat and electricity generation, a key tool to bring down the escalated atmospheric greenhouse gases and an alternation for fossil fuel.