Prenatal diagnosis of cystic fibrosis using linked DNA probes

This paper presents data collected in Europe on 107 prenatal diagnoses of cystic fibrosis (CF) using linked DNA markers. To date, 38 children have been born without CF, as predicted, demonstrating the present rapid move from research to clinical genetic service.     

Fire use: Is it really the cheaper land preparation method for large-scale plantations?

During the last two decades Indonesia has experienced immense forest and land fires. Often these fires are associated with extended drought and widespread use of fire to clear previously logged forest and other degraded land in preparation for oil palm, rubber, or pulpwood plantations. There are many reasons for the use of fire in land clearing activities, but probably the most important one is economics. There is still acceptance that fire is the cheapest, fastest, and most effective land clearing method with the added benefit of providing nutrients from ash residues. This paper provides a review of existing information on the financial costs and benefits of using fire for land clearing in agriculture and forestry plantations as compared with zero-burning techniques. The findings indicate that the economic advantage of fire use varies widely and depends on many factors, such as soil fertility, vegetation density, labour cost, equipment and training costs, and the costs of fire management. For large-scale land clearing, the financial analysis of the costs and benefits of fire versus zero-burning shows that when applied to low-volume vegetation, zero-burning methods are not more expensive than burning – and may actually be more cost effective in the long term. This is the case for clearing oil palm or rubber plantations for replanting, low secondary vegetation, and heavily logged-over forest. Under high-volume forest conditions, burning remains less expensive because it is more difficult, time consuming, and costly to dispose of high volumes of piled wood mechanically.     

The return of the giants: ecological effects of an increasing elephant population

Northern Botswana and adjacent areas, have the world's largest population of African elephant (Loxodonta africana). However, a 100 years ago elephants were rare following excessive hunting. Simultaneously, ungulate populations were severely reduced by decease. The ecological effects of the reduction in large herbivores must have been substantial, but are little known. Today, however, ecosystem changes following the increase in elephant numbers cause considerable concern in Botswana. This was the background for the "BONIC" project, investigating the interactions between the increasing elephant population and other ecosystem components and processes. Results confirm that the ecosystem is changing following the increase in elephant and ungulate populations, and, presumably, developing towards a situation resembling that before the reduction of large herbivores. We see no ecological reasons to artificially change elephant numbers. There are, however, economic and social reasons to control elephants, and their range in northern Botswana may have to be artificially restricted.     

South Philadelphia passive sampler and sensor study

From June 2013 to March 2015, in total 41 passive sampler deployments of 2 wk duration each were conducted at 17 sites in South Philadelphia, PA, with results for benzene discussed here. Complementary time-resolved measurements with lower cost prototype fenceline sensors and an open-path ultraviolet differential optical absorption spectrometer were also conducted. Minimum passive sampler benzene concentrations for each sampling period ranged from 0.08 ppbv to 0.65 ppbv, with a mean of 0.25 ppbv, and were negatively correlated with ambient temperature (–0.01 ppbv/°C, R² = 0.68). Co-deployed duplicate passive sampler pairs (N = 609) demonstrated good precision with an average and maximum percent difference of 1.5% and 34%, respectively. A group of passive samplers located within 50 m of a refinery fenceline had a study mean benzene concentration of 1.22 ppbv, whereas a group of samplers located in communities >1 km distant from facilities had a mean of 0.29 ppbv. The difference in the means of these groups was statistically significant at the 95% confidence level (p < 0.001). A decreasing gradient in benzene concentrations moving away from the facilities was observed, as was a significant period-to-period variation. The highest recorded 2-wk average benzene concentration for the fenceline group was 3.11 ppbv. During this period, time-resolved data from the prototype sensors and the open-path spectrometer detected a benzene signal from the west on one day in particular, with the highest 5-min path-averaged benzene concentration measured at 24 ppbv.

Implications: Using a variation of EPA’s passive sampler refinery fenceline monitoring method, coupled with time-resolved measurements, a multiyear study in South Philadelphia informed benzene concentrations near facilities and in communities. The combination of measurement strategies can assist facilities in identification and mitigation of emissions from fugitive sources and improve information on air quality complex air sheds.     

Assessment of volatile organic compound and hazardous air pollutant emissions from oil and natural gas well pads using mobile remote and on-site direct measurements

Emissions of volatile organic compounds (VOCs) and hazardous air pollutants (HAPs) from oil and natural gas production were investigated using direct measurements of component-level emissions on pads in the Denver-Julesburg (DJ) Basin and remote measurements of production pad-level emissions in the Barnett, DJ, and Pinedale basins. Results from the 2011 DJ on-site study indicate that emissions from condensate storage tanks are highly variable and can be an important source of VOCs and HAPs, even when control measures are present. Comparison of the measured condensate tank emissions with potentially emitted concentrations modeled using E&P TANKS (American Petroleum Institute [API] Publication 4697) suggested that some of the tanks were likely effectively controlled (emissions less than 95% of potential), whereas others were not. Results also indicate that the use of a commercial high-volume sampler (HVS) without corresponding canister measurements may result in severe underestimates of emissions from condensate tanks. Instantaneous VOC and HAP emissions measured on-site on controlled systems in the DJ Basin were significantly higher than VOC and HAP emission results from the study conducted by Eastern Research Group (ERG) for the City of Fort Worth (2011) using the same method in the Barnett on pads with low or no condensate production. The measured VOC emissions were either lower or not significantly different from the results of studies of uncontrolled emissions from condensate tanks measured by routing all emissions through a single port monitored by a flow measurement device for 24 hr. VOC and HAP concentrations measured remotely using the U.S. Environmental Protection Agency (EPA) Other Test Method (OTM) 33A in the DJ Basin were not significantly different from the on-site measurements, although significant differences between basins were observed.

Implications: VOC and HAP emissions from upstream production operations are important due to their potential impact on regional ozone levels and proximate populations. This study provides information on the sources and variability of VOC and HAP emissions from production pads as well as a comparison between different measurement techniques and laboratory analysis protocols. On-site and remote measurements of VOC and HAP emissions from oil and gas production pads indicate that measurable emissions can occur despite the presence of control measures, often as a result of leaking thief hatch seals on condensate tanks. Furthermore, results from the remote measurement method OTM 33A indicate that it can be used effectively as an inspection technique for identifying oil and gas well pads with large fugitive emissions.     

Seasonal variation in the effects of ocean warming and acidification on a native bryozoan, Celleporaria nodulosa

Ocean warming and acidification are co-occurring stressors likely to affect marine biota through climate-driven change to the ocean. We investigated the effects of increased temperature and lowered pH, solely and in combination, on the growth of the endemic Australian bryozoan, Celleporaria nodulosa. Two temperatures and three pH levels were fully crossed in experimental treatments performed in winter 2008 (August) and summer 2009 (February/March). Fragments of C. nodulosa colonies (clones) were collected from Coffs Harbour, NSW, Australia, (30°18′S, 153°09′E) and elongation of colonies was assessed periodically over a 12-day incubation period. Lowered pH in winter significantly decreased growth. Elevated temperatures during the summer significantly impeded the growth of bryozoan colonies, possibly masking the effect of ocean acidification and discovering a maximal thermal tolerance at around 27 °C for C. nodulosa. The effects of decreased pH and increased temperature may be seasonally dependent and particularly acute during the summer months. Thermal stress may in fact be the initial stressor before ocean acidification, negatively affecting organisms in such a way that they are unable to survive before feeling the effects of ocean acidification.