提高转炉OG效率的对策

对武钢第一炼钢厂100t转炉OG系统设备存在的问题进行了分析、研究，结合生产实际进行了一系列的技术改进和工艺参数调整，提高了OG系统效率。     

治污投资的政府最优政策博弈

外部性的存在及制造商治污投资动机不足要求政府对制造商的行为进行相应的规制，政府在制造商的治污投资行为中主要的作用是通过各种措施使得制造裔有动机地去自觉地进行有效的治污投资;政府的主要控制手段包括直接管制及借助市场激励，政府制定环境管理策略的关键因素是“惩罚的力度与激励的强度”。基于社会福利最大化的角度；从制造商的治污投资行为出发研究政府制定环境管理规制的策略，通过一个三阶段的博弈模型分析福利增进量、洽污成本与治污效果等三个因素对“惩罚力度与激励强度”的影响。     

区域水战略方案选优的动态组合评价模型研究

水安全危机是人类进入新世纪以来在生存及发展方面所面临的最严重挑战之一。研究科学合理的水安全战略成为区域可持续发展的重大课题。针对区域水战略问题涉及众多因素且各因素之间动态关联的特点，提出了基于水战略方案优选的兼容度极大化动态组合评价模型（CMM—DCEM），并将其成功地应用于我国广东省北江下游及其三角洲地区水安全战略方案优选评价。评价结果及模型基于不确定性的敏感性分析结果证明：CMM—DCEM实现了主、客观赋权方法以及单一评价模型的融合，使用实码加速遗传算法求解目标函数，克服了传统的组合评价方法计算繁琐的不足，评价过程更加科学合理。     

生态足迹研究现状及基于净初级生产力的计算方法初探

生态足迹是一种有效的再生资源更新能力的定量测度方法，其主要用于评估给定年，给定技术条件下生物圈的再生能力能否满足人类消费需求。本研究对国内外生态足迹模型的理论假设、生态足迹、生物承载力、生态盈余、生态赤字进行了简要介绍；在对国际组织发布的生态足迹报告以及生态足迹文献发表情况进行统计的基础上，回顾了国内外的生态足迹计算方法——基于净初级生产力的计算方法，并与现有的基于全球农业生态区的计算方法进行了比较，探讨了两种方法的优缺点；最后对生态足迹今后的研究重点提出了一些看法和展望。     

哈尔滨市秸秆焚烧大气污染负荷估算方法研究

本文针对近些年哈尔滨秋末冬初大气污染程度增加的溯源问题,基于静风污染气象及降雪对秸秆焚烧的影响等基本假设,采用箱式模型和优化拟合的方法对秸秆焚烧产生污染物的源强及其负荷进行了估算.通过对2015年和2017年典型时段数据的优化拟合得到降雪前重污染天气下PM₁₀排放源强分别为20.16、21.83 μg·m^-2·s^-1,CO的排放源强分别为149.32、138.65 mg·m^-2·s^-1;降雪后重污染天气下PM₁₀排放源强分别为15.98、7.09 μg·m^-2·s^-1,CO的排放源强分别为122.91、89.21 mg·m^-2·s^-1.由降雪前后各污染物的源强差得到2015年和2017年秸秆焚烧产生的PM₁₀的排放源强分别为4.18、14.74 μg·m^-2·s^-1,负荷分别为20.73%、67.52%;CO的排放源强分别为26.41、49.44 mg·m^-2·s^-1,负荷分别为17.69%、35.66%.本文为相关清单的研究提供了一种客观的校核方法,具有重要的社会、环境及现实意义.     

基于改进遗传算法的河流水污染源反演方法

针对河流水污染应急响应过程中污染源排放历史迟知、未知的问题,结合多种群遗传算法和自适应遗传算法,利用一维河流水质模型和水质监测数据,研究建立了基于改进遗传算法的河流水污染定量源反演方法,实现了对河流污染源排放历史的识别与重构.将该方法应用于美国特拉基河流的3个不同流量下的示踪剂实验中,对示踪剂排放历史进行定量源反演分析.结果表明：IGA算法对高、中、低不同流量下的3次示踪剂实验均可以很好的重构和识别示踪剂排放历史,对于实际河流水污染源反演分析的误差均在可接受范围内.IGA算法在河流水污染源反演分析中具有一定的可靠性和稳定性,可为河流水污染精准溯源与治理提供科学的技术支撑.     

面向国土空间规划的“双评价”：挑战与应对

面向国土空间规划的科学性、可操作性、层级性等内涵,探讨了资源环境承载能力评价和国土空间开发适宜性评价（“双评价”）与国土空间规划之间的基本逻辑问题、应用挑战与应对方法。通过系统梳理“双评价”的理论发展和相关政策响应,剖析了“双评价”在应用探索、内涵扩充、系统支撑三个阶段的研究重点和服务目标,阐明了承载力评价与适宜性评价之间关联逻辑的演进历程。总结了当前“双评价”在应用上的几个关键挑战：一是“双评价”应用于“三区三线”划定的逻辑尚未明确;二是当前承载能力评价与未来规划决策之间存在逻辑悖论;三是“双评价”在不同层级国土空间规划中传导失灵;四是两个评价之间的关联逻辑仍存在争议。为此,提出了应对“双评价”挑战的四点建议：深化理论认知、拓展评价维度、建立传导机制、厘清内在关系,以提升“双评价”对国土空间规划决策的支撑能力。     

Effects of SO2 and H2O on low-temperature NO conversion over F-V2O5-WO3/TiO2 catalysts

F-V_2 O_5-WO3/Ti02 catalysts were prepared by the impregnation method.As the content of F ions increased from 0.00 to 0.35 wt.%,the NO conversion of F-V_2 O_5-WO_3/TiO_2 catalysts initially increased and then decreased.The 0.2 F-V_2 O_5-WO_3/TiO_2 catalyst(0.2 wt.% F ion)exhibited the best denitration(De-NOx) performance,with more than 95% NO conversion in the temperature range 160-360℃,and 99.0% N2 selectivity between 110 and 280℃.The addition of an appropriate amount of F ions eroded the surface morphology of the catalyst and reduced its grain size,thus enhancing the NO conversion at low temperature as well as the sulfur and water resistance of the V_2 O_5-WO3/Ti02 catalyst.After selective catalytic reduction(SCR) reaction in a gas flow containing SO_2 and H_2 O,the number of NH3 adsorption sites,active component content,specific surface area and pore volume decreased to different degrees.Ammonium sulfate species deposited on the catalyst surface,which blocked part of the active sites and reduced the NO conversion performance of the catalyst.On-line thermal regeneration could not completely recover the catalyst activity,although it prolonged the cumulative life of the catalyst.In addition,a mechanism for the effects of S02 and H_2 O on catalyst NO conversion was proposed.     

Particulate matter exchange between atmosphere and roads surfaces in urban areas

The deposition and the re-suspension of particulate matter (PM) in urban areas are the key processes that contribute not only to stormwater pollution, but also to air pollution. However, investigation of the deposition and the re-suspension of PM is challenging because of the difficulties in distinguishing between the resuspended and the deposited PM. This study created two Bayesian Networks (BN) models to explore the deposition and the re-suspension of PM as well as the important influential factors. The outcomes of BN modelling revealed that deposition and re-suspension of PM10 occurred under both, high-traffic and low-traffic conditions, and the re-suspension of PM2.5 occurred under low-traffic conditions. The deposition of PM10 under low-volume traffic condition is 1.6 times higher than under high-volume traffic condition, which is attributed to the decrease in PM10 caused by relatively higher turbulence under high-volume traffic conditions. PM10 is more easily resuspended from road surfaces compared to PM2.5 as the particles which larger than the thickness of the laminar airflow over the road surface are more easily removed from road surfaces. The increase in wind speed contributes to the increase in PM build-up by transporting particulates from roadside areas to the road surfaces and the airborne PM2.5 and PM10 increases with the increase in relative humidity. The study outcomes provide a step improvement in the understanding of the transfer processes of PM2.5 and PM10 between atmosphere and urban road surfaces, which in turn will contribute to the effective design of mitigation measures for urban stormwater and air pollution.