Why it was so difficult to develop new methods to inspect work organization and psychosocial risks in Sweden

In 2001–2003, the Swedish Work Environment Authority (SWEA) ran a project to develop better methods to inspect psychosocial risk factors at work. The objective was twofold: to develop methods to enable most inspectors to effectively inspect such health risks, and to set a standard for method development within SWEA. This article presents our evaluation of the project and a discussion of this as an example of regulatory implementation. The methods project largely failed. Major reasons were the lack of general provisions on psychosocial risks, isolation from other policies in SWEA that affect the inspection of such risks, and a lack of engagement and guidance by top management on how to prioritize and conduct this very challenging development project. Underlying this was possibly a preoccupation with other major internal reforms, a limited competence and an unwillingness to challenge the employers on psychosocial and organizational issues within SWEA’s top management. Yet, the project probably had some indirect positive effects by raising awareness within the authority of psychosocial risk factors, of the complexities of inspecting such risks and of the difficulty to develop effective methods to supervise them.     

Chilled ammonia process for CO2 capture

The chilled ammonia process absorbs the CO₂ at low temperature (2–10 °C). The heat of absorption of carbon dioxide by ammonia is significantly lower than for amines. In addition, degradation problems can be avoided and a high carbon dioxide capacity is achieved. Hence, this process shows good perspectives for decreasing the heat requirement. However, a scientific understanding of the processes is required. The thermodynamic properties of the NH₃–CO₂–H₂O system were described using the extended UNIQUAC electrolyte model developed by Thomsen and Rasmussen in a temperature range from 0 to 110 °C and pressure up to 100 bars. The results show that solid phases consisting of ammonium carbonate and bicarbonate are formed in the absorber. The heat requirements in the absorber and in the desorber have been studied. The enthalpy calculations show that a heat requirement for the desorber lower than 2 GJ/ton CO₂ can be reached.     

NitroGenius:氮决策支持系统--荷兰氮污染问题最佳解决方案的一个游戏模拟实验

利用计算机模拟的方法,我们为第二届国际氮会议研制开发了一个游戏形式的氮决策支持系统.研制这一系统的目的是:①使科学工作者和决策者们都能认识到荷兰氮污染问题的复杂性,因为荷兰是一个农业、工业和运输业活动密集的区域;②探索以最低的社会经济代价解决氮污染的最佳方案.NitroGenius由有关时空范围内的氮流动模型组成,其中包括氨和氮氧化合物的释放及其对地表水和地下水的污染.NitroGenius中还包括了一个经济模型,它描述了各个重要经济部门之间的关系,以及不同氮排放控制措施对国民生产总值(GDP)、失业率、能源消耗和环境的影响.在第二次国际氮会议期间,大约有50个研究组对NitroGenius进行了测试,结果表明,如果认真进行计划并选择适当的治理措施,就能够以适当的代价解决荷兰的氮污染问题.     

The environmental occurrence of hexabromocyclododecane in Sweden

The brominated flame retardant hexabromocyclododecane (HBCD) is extensively used in Europe, but data on the environmental concentrations of this chemical are scarce. A first screening has been performed concerning the environmental occurrence of HBCD in Sweden, a country where the chemical is not produced and the current industrial use is very limited. Possible emission sources were identified through a systematic analysis of the use in a life cycle perspective. In addition to a few point sources, diffuse emissions from polymeric products are possible. Measurements have been performed close to certain possible point sources, in the urban environment and in remote regions, and included air, deposition, water, soil, sediments, sludge, biota and foodstuffs. HBCD was detected in all media analysed and in all environments. The relatively high concentrations detected in herring and foodstuffs provide evidence for bioaccumulation of HBCD. The presence of HBCD in remote background air implies that HBCD has potential for long-range atmospheric transport. There are also some indications that diffuse emissions of HBCD occur in the urban environment.     

Exposure to polybrominated diphenyl ethers and tetrabromobisphenol A among computer technicians

This study investigates exposure to polybrominated diphenyl ethers (PBDEs) and tetrabromobisphenol A (TBBPA), which are used as flame retardants in electronic equipment, in a group of technicians with intense computer work. Thirteen PBDE congeners and TBBPA were quantified in serum from 19 computer technicians. Previously investigated groups of hospital cleaners with no computer experience, and clerks working full-time at computer screens were used for comparison. The computer technicians had serum concentrations of BDE-153, BDE-183 and BDE-209 that were five times higher than those reported among hospital cleaners and computer clerks. The median levels observed among the computer technicians were 4.1, 1.3, and 1.6 pmol/g lipid weight, respectively. In contrast, for BDE-47 there was no difference between the computer technicians and the others. BDE-100, BDE-203, and three structurally unidentified octa-BDEs and three nona-BDEs, were present in almost all samples from the computer technicians. Further, TBBPA was detected in 8 out of 10 samples. The levels of BDE-153, BDE-183, and one of the octa-BDEs were positively correlated with duration of computer work among technicians. On a group level an exposure gradient was observed, from the least exposed cleaners to the clerks, and to the highest exposed group of computer technicians. A dose (duration of computer work)-response relationship among computer technicians was demonstrated for some higher brominated PBDE congeners. Thus, it is evident that PBDEs used in computers and electronics, including the fully brominated BDE-209, contaminate the work environment and accumulate in the workers tissues.     

Photodegradation of the synthetic fragrance OTNE and the bactericide triclosan adsorbed on dried loamy sand--results from models and experiments

Fragrances such as OTNE (marketed as Iso-E-Super®) and bactericides such as triclosan (marketed as Igrasan) are present in waste water and thus finally sorbed to sewage sludge. With that sludge they can reach agricultural fields where they potentially can undergo photodegradation processes. In this study the photodegradation of OTNE and triclosan on dried loamy sand was measured under artificial sunlight conditions in laboratory experiments. These compounds were artificially added with concentrations of 1 μg g⁻¹ on pre-rinsed dried loamy sand. The decrease in concentration with light irradiation was measured for 32 d in comparison to soil samples without light irradiation. The estimated light source intensity was 27 W m⁻². Within the experiment, the apparent half-life was 7 and 17 d for OTNE and triclosan respectively. The decrease did not simply follow first-order kinetics. The apparent rate constant decreased in the latter stage of reaction, suggesting that part of the chemicals were inaccessible for degradation. Two models, i.e., a diffusion-limited model, and a light penetration-limited model, were used in comparison to the measured data to explain the observed degradation limitations in the latter stages of the experiments. Comparing the hereby obtained model parameters with estimated physico-chemical parameters for the soil and the two chemical compounds, the light penetration-limited model, in which the degradation in the soil surface layer is assumed to be limited due to the shading effect of light in the upper thin soil layer, showed to be the most realistic in describing the photodegradation.     

细粒酒精模型冰力学性能综合评述

简要介绍现行几种模型冰质量评价指标。对细粒精模型冰的特征进行了归纳和分析。阐明细粒酒精模型冰历史资源的可靠性，从模型冰变形模量与弯曲强度的关系和压缩强度民弯曲强度的关系，以及其它物理和力学数入手，综合评价了细粒酒精模型冰的质量。     

Tri-decabrominated diphenyl ethers and hexabromocyclododecane in indoor air and dust from Stockholm microenvironments 2: indoor sources and human exposure

Data on polybrominated diphenyl ether (PBDE) and hexabromocyclododecane (HBCD) concentrations from Stockholm, Sweden, indoor microenvironments were combined with information from detailed questionnaires regarding the sampling location characteristics, including furnishing and equipment present. These were used to elucidate relationships between possible flame-retarded sources and the contaminant concentrations found in air and dust. Median concentration ranges of ΣPenta-, ΣOcta-, ΣDecaBDE and HBCD from all microenvironments were 19-570, 1.7-280, 29-3200 and < 1.6-2 pg/m³ in air and 22-240, 6.1-80, 330-1400 and 45-340 ng/g in dust, respectively. Significant correlations were found between concentrations of some PBDEs and HBCD in air and/or dust and the presence of electronic/electrical devices, foam furniture, PUF mattresses and synthetic bed pillows in, as well as floor area and construction year of the microenvironment. Car interiors were a source to indoor air in dealership halls. Using median and maximum concentrations of ΣPenta-, ΣOcta-, ΣDecaBDE and HBCD in air and dust, adult and toddler (12-24 months) intakes from inhalation and dust ingestion were estimated. Toddlers had higher estimated intakes of ΣPenta-, ΣDecaBDE and HBCD (7.8, 43, 7.6 ng/d, respectively) from dust ingestion than adults (5.8, 38, 6.0 ng/d, respectively). Air inhalation in offices was also an important exposure pathway for ΣPenta-, ΣOcta- and ΣDecaBDE in adults. For ΣPentaBDE and HBCD, air inhalation and dust ingestion play minor roles when compared to previously published Swedish dietary intakes (median exposures). However, in worst case scenarios using maximum concentrations, dust ingestion may represent 77 and 95% of toddler intake for ΣPentaBDE and HBCD, respectively.     

Worker influence on voluntary OHS management systems – A review of its ends and means

Voluntary management systems (MS) might improve occupational health and safety (OHS). MSs, as with any OHS management, requires worker influence (and management commitment) to reduce risks at work. Influence through union backed safety representatives (or similar) achieves the best OHS results. However, a MS guarantees neither effective OHS management nor strong worker influence. Systematic violations of legal requirements have repeatedly caused accidents at workplaces with certified MSs. Why employers introduce MS’s can affect their implementation and outcomes. Internal objectives, of productivity and/or work-related health, require upstream prevention and a genuine influence by workers and their safety representatives. However, managers with external objectives for a MS, such as brand images or low reported accident figures, may pursue such objectives through downstream control of safe behaviour – sometimes suppressing accident reporting – and with little attention to more serious long-term diseases. Worker consultation may then be a limited means of enhancing safety, or to one-way communication on safety rules. Such consultation may even be used for union busting. Many trade unions welcome MSs as possible improvement instruments, but they are also wary of what MSs employers are actually trying to implement. Unions try to support their safety representatives’ influence in a MS by enhancing their rights and their competences. If the motives for MSs are mainly external and the opportunities for influence too limited, it may be better for unions not to cooperate with management in a MS that may lead more to manipulation than to safe and sound work.     

Towards a framework to assess,compare and develop monitoring and evaluation of climate change adaptation in Europe

Adaptation is increasingly recognised as essential when dealing with the adverse impacts of climate change on societies, economies and the environment. However, there is insufficient information about the effectiveness of adaption policies, measures and actions. For this reason, the establishment of monitoring programmes is considered to be necessary. Such programmes can contribute to knowledge, learning and data to support adaptation governance. In the European Union (EU), member states are encouraged to develop National Adaptation Strategies (NASs). The NASs developed so far vary widely because of differing views, approaches and policies. A number of member states have progressed to monitoring and evaluating the implementation of their NAS. It is possible to identify key elements in these monitoring programmes that can inform the wider policy learning process. In this paper, four generic building blocks for creating a monitoring and evaluation programme are proposed: (1) definition of the system of interest, (2) selection of a set of indicators, (3) identification of the organisations responsible for monitoring and (4) definition of monitoring and evaluation procedures. The monitoring programmes for NAS in three member states—Finland, the UK and Germany—were analysed to show how these elements have been used in practice, taking into account their specific contexts. It is asserted that the provision of a common framework incorporating these elements will help other member states and organisations within them in setting up and improving their adaptation monitoring programmes.