Return period of enhanced gamma ray dose rates: regional differences observed in Japan

We estimated the return period of an increased gamma ray dose rate (Delta gamma) derived from (222)Rn progeny deposited with precipitation. The approximate probability distribution for Delta gamma followed a Hazen plot, which is an empirical plotting equation, indicating that the distribution of Delta gamma was approximated by a nearly double-exponential. The distribution of Delta gamma was well represented by the Gumbel distribution, and the return period for Delta gamma was estimated theoretically. There was a notable regional difference in the return period between the coast of the Japan Sea and the inland or Pacific coast areas: the return period for a given Delta gamma at monitoring sites on the Sea of Japan coast was 1.5 to 2.5 times shorter than that in the inland or Pacific coast areas. This variation with locality suggests that the rate of wet-deposition of (222)Rn progeny is larger at sites on the Sea of Japan coast than inland or on the Pacific coast areas. The expected return period for the maximum Delta gamma at each site was about 10 years. This estimation of the return period of Delta gamma is a novel approach to the study of environmental science in fields such as radioactivity.     

Speciation of the radioactive nuclides in incinerator fly ash of municipal solid waste using sequential extractions

Journal of Material Cycles and Waste Management - The radioactive nuclides in the incinerator fly ashes from municipal solid waste sampled in June 2006 were analyzed with γ-ray spectrometry....     

Inception of formation and early morphogenesis of the bacterial light organ of the sea urchin cardinalfish, <Emphasis Type="Italic">Siphamia versicolor</Emphasis>

The cardinalfish Siphamia versicolor (Perciformes: Apogonidae) forms a bioluminescent symbiosis with the marine luminous bacterium Photobacterium mandapamensis, harboring the bacteria in a ventral, disc-shaped light organ and using the bacterial light apparently for counterillumination and attracting prey. Little definitive information has been available on the developmental and microbiological events surrounding the initiation of symbiosis, a critical stage in the life history of the fish, in S. versicolor or any of the many other species of bacterially luminous fish. To identify the stage at which light organ formation begins, to determine the origin of cells forming the light organ, and to characterize its bacterial colonization status during development, early developmental stages of S. versicolor obtained and reared from wild-caught mouth-brooding males were examined with histological and microbiological methods. A light organ primordium was not evident in embryos, post-embryos, or pre-release larvae, whereas the light organ began to form within 1 day of release of full-term pre-flexion larvae from the mouths of male fish. Analysis of post-release larvae revealed that the light organ arises from a proliferation and differentiation of intestinal epithelial cells, and that it quickly develops structural complexity, including the formation of chambers and gaps contiguous with the intestinal epithelium. However, the nascent light organ remained uncolonized by the symbiotic bacteria through several days of post-release development, even in the presence of high numbers of the symbiotic bacteria. These results demonstrate that the inception of light organ formation in S. versicolor occurs independently of its symbiotic bacteria and that receptivity to bacterial colonization apparently requires substantial post-release development of the light organ. Larvae therefore most likely acquire their symbiotic bacteria from seawater, during or shortly after the transition from the pre-flexion to the flexion developmental stage.     

Towards institutional analysis of sustainability science: a quantitative examination of the patterns of research collaboration

This paper examines quantitatively the patterns of collaboration over geographical boundaries in the emerging field of sustainability science by empirically analyzing the bibliometric data of scientific articles. The results indicate that an increasing number of countries are engaged in research on sustainability, with the proportion of articles published through international collaboration rising as well. The number of countries engaged in international collaboration on sustainability research has been increasing, and the diversity of countries engaged in research collaboration beyond national borders is also increasing. The geographical patterns of collaboration on sustainability show that research collaboration tends to be conducted between countries which are geographically located closely, suggesting that communication and information exchange might be limited within the regional clusters. The focused fields of research activities on sustainability are significantly different between countries, as each country has its focused fields of research related to sustainability. The specialization of research activities is also observed in international collaboration. While these patterns of international collaboration within regional clusters focusing on specific fields could be effective in promoting the creation, transmission, and sharing of knowledge on sustainability utilizing the already existing regional networks, they could pose a serious obstacle to collecting, exchanging, and integrating diverse types of knowledge, especially when it is necessary to deal with problems involving large-scale complex interactions with long-term implications, such as climate change. It would be of critical importance to establish inter-regional linkages by devising appropriate institutional arrangements for global research collaboration on sustainability science.     

Thermal cracking of oils from waste plastics

Thermal cracking of decomposed waste plastic oil produces a good yield of olefins. The solvent extraction of such waste plastic oil seems to be efficient for increasing gas yields and recycling monomers. To assess the potential of monomer recovery from municipal waste plastics, the oils were cracked using a laboratory-scale quartz-tube reactor. The waste plastic oils were provided by two commercial plants of the Sapporo Plastic Recycle Co. and the Dohoh Recycle Center Co. in Japan. A model waste plastic oil made in a laboratory was also examined. Yields of ethene, propene, and other products were measured at different temperatures. Two-step pyrolysis reduces coking compared with the direct thermal degradation of plastics. The raffinates from waste plastic oils extracted by sulfolane were also cracked. The primary products were almost the same as those from nontreated oils. The maximum total gas yield was 78wt%–85wt% at 750°C, an increase of about 20wt% compared with that of nonextracted oil. Solvent extraction removes stable aromatic hydrocarbons such as styrene, which is more coked than cracked.     

Toxic fluoride and arsenic contaminated groundwater in the Lahore and Kasur districts, Punjab, Pakistan and possible contaminant sources

The present study is the first attempt to put forward possible sources of As, F- and SO4(2-) contaminated groundwater in the Kalalanwala area, Punjab, Pakistan. Five rainwater and 24 groundwater samples from three different depths were analyzed. Shallow groundwater from 24 to 27 m depth contained high F- (2.47-21.1mg/L), while the groundwater samples from the deeper depth were free from fluoride contamination. All groundwater samples contained high As (32-1900 microg/L), in excess of WHO drinking water standards. The SO4(2-) ranges from 110 to 1550 mg/L. Delta34S data indicate three sources for SO4(2-) air pollutants (5.5-5.7 per thousand), fertilizers (4.8 per thousand), and household waste (7.0 per thousand). Our important finding is the presence of SO4(2-), As and F- in rainwater, indicating the contribution of these elements from air pollution. We propose that pollutants originate, in part, from coal combusted at brick factories and were mobilized promotionally by the alkaline nature of the local groundwater.     

A system dynamics approach for hospital waste management

Healthcare services provided by hospitals may generate some infectious wastes. Although a large percentage of hospital waste is classified as general waste, which has similar nature as that of municipal solid waste and, therefore, could be disposed in municipal landfills, a small portion of infectious waste has to be managed in the proper manner in order to minimize risk to public health. Many factors involved in the hospital waste management system often link to one another, which require a comprehensive analysis to determine the role of each factor in the system. In this paper, we present a hospital waste management model based on system dynamics to determine the interaction among factors in the system using a software package, Stella. A case study of the City of Jakarta, Indonesia is selected. The hospital waste generation is affected by various factors including the number of beds in the hospitals and the NIMBY (not in my back yard) syndrome. To minimize the risk to public health, we found that waste segregation, as well as infectious waste treatment prior to disposal, has to be conducted properly by the hospital management, especially when scavenging takes place in landfill sites in developing countries.     

Separation and characterization of the colored material from sugarcane molasses

The colored material (X) was effectively separated from sugarcane molasses using reversed-phase chromatography. Characterization of the molecular structure of sample X was performed using infrared absorption (IR) spectrometry, mass spectrometry (MS), and dynamic light scattering (DLS). The IR spectrum was similar to that of commercial humic acid, and the MS analysis showed that the sample possessed relatively small heterogeneous molecules with molecular masses around 234, 446, 657, 868, and 1079 Da. On the other hand, X sample showed an inhibitory activity toward the cysteine proteinase papain. Furthermore, the inhibitory (G-1) and weak inhibitory (G-2) fractions were separated from sample X using gel permeation chromatography. Samples G-1 and G-2 inhibited papain partial-noncompetitively and had the inhibition constants of 5.01 x 10(-5) and 1.08 x 10(-3)M, respectively. Interestingly, in the DLS experiment, the Stokes radius of sample G-1 was approximately 2 nm, about twice one of sample G-2.     

Ozone Injection into an Activated Carbon Bed to Remove Hydrogen Sulfide in the Presence of Concurrent Substances

ABSTRACT

Adsorption using activated carbon is one of the most reliable techniques for preventing odor by substances such as H₂S. Concurrent substances in effluent gas often reduce the removal capacity of activated carbon for H₂S. As a means of restoring capacity under such conditions, ozone injection into an activated carbon column was examined. When activated carbon was saturated with substances such as toluene, ethanol, n-butanol, or iso-butanol, its capacity to remove H₂S decreased in proportion to the amount of the saturating substance. Under such conditions, ozone injection greatly increased capacity. Toluene, which is not easily decomposed by ozone, was displaced by ozone and by oxidized products of H₂S. Ethanol, which is adsorbed in small amounts by activated carbon and easily decomposed by ozone, was removed by ozone injection. Butanols, which are also decomposed by ozone and adsorbed in large quantities by activated carbon, showed intermediate behavior between that of toluene and ethanol.