Analysis of high-level waste glass performance by the physical and geochemical simulation code STRAG4

A source term release analysis code for high-level waste glass has been developed for simulation of long-term dissolution behavior under repository conditions. The STRAG4 code consists of models for (a) element diffusion in both the bulk glass and surface layer, (b) glass dissolution kinetics at the interface between glass and water, and (c) geochemical reactions of dissolved elements in underground water. The simulations for various conditions of glass dissolution, including a static and dynamic system, show accordance with the experimental observations even in the relatively complicated case where bentonite is present. Long-term dissolution analyses of a borosilicate waste glass were carried out as preliminary study. The calculations were achieved by considering detrimental effects due to interactions between the glass and surrounded materials which are presumed to be in a repository environment (i.e., compacted bentonite, corrosion products from the iron overpack, and underground water). The environmental conditions such as temperature and geochemical reactions are also taken into account in the calculations. The results suggest the life of the waste glass would be more than 50,000 years even if the glass surface area increased by a factor of 10 due to crack formation.     

Catalytic decomposition of hydrocarbon into hydrogen and carbon in a spouted-bed reactor as the second-stage reactor of a plastic recycling process

A two-stage process for the chemical recycling of plastics is proposed. In this process, which consists of two reactors, plastics are converted into hydrogen and carbon. In the first reactor, plastic chips are thermally decomposed into hydrocarbons. In the second reactor, the hydrocarbons formed in the first reactor are catalytically decomposed into carbon and hydrogen. In this study, in order to obtain basic data for the second reactor, propene was catalytically decomposed in a laboratory-scale spouted-bed reactor (600mm high, 21.6mm internal diameter, made of SUS304). The effect of the type of spouting medium used on the decomposition behavior of propene was investigated using four types of spouting medium (nickel-plated -alumina, palladium-plated -alumina, nickel-impregnated -alumina, and -alumina). The nickel-impregnated -alumina gave the best propene conversion and hydrogen yield.     

Estimating pesticide runoff in small streams

Surface runoff is one of the most important pathways for pesticides to enter surface waters. Mathematical models are employed to characterize its spatio-temporal variability within landscapes, but they must be simple owing to the limited availability and low resolution of data at this scale. This study aimed to validate a simplified spatially-explicit model that is developed for the regional scale to calculate the runoff potential (RP). The RP is a generic indicator of the magnitude of pesticide inputs into streams via runoff. The underlying runoff model considers key environmental factors affecting runoff (precipitation, topography, land use, and soil characteristics), but predicts losses of a generic substance instead of any one pesticide. We predicted and evaluated RP for 20 small streams. RP input data were extracted from governmental databases. Pesticide measurements from a triennial study were used for validation. Measured pesticide concentrations were standardized by the applied mass per catchment and the water solubility of the relevant compounds. The maximum standardized concentration per site and year (runoff loss, R_Loss) provided a generalized measure of observed pesticide inputs into the streams. Average RP explained 75% (p < 0.001) of the variance in R_Loss. Our results imply that the generic indicator can give an adequate estimate of runoff inputs into small streams, wherever data of similar resolution are available. Therefore, we suggest RP for a first quick and cost-effective location of potential runoff hot spots at the landscape level.     

Nematode species at risk--a metric to assess pollution in soft sediments of freshwaters

Soft sediments are often highly polluted as many of the toxic chemicals introduced into surface waters bind to settling particles. The resulting accumulation of pollutants in the sediments poses a risk for benthic communities. However, pollution induced changes in benthic communities have been difficult to determine when using macro-invertebrates as bioindicators, as these organisms are often absent in soft sediment. The present study therefore examined the ability of meiofaunal organisms, specifically, nematodes, to assess the ecological status of soft sediments. Over a 9-year period, nematode communities present in sediments collected from large rivers and lake Constance in Germany were studied. These sediments showed a large range of physico-chemical properties and anthropogenic contamination. After the degree of metal and organic contamination was translated into ecotoxicologically more relevant toxic units (TUs), multivariate methods were used to classify nematode taxa in species at risk (NemaSPEAR) or not at risk (NemaSPE(not)AR). This approach clearly distinguished the influence of sediment texture from that of the toxic potential of the samples and thus allowed classification of the nematode species according to their sensitivity to or tolerance of toxic stress. Two indices, expressing the proportion of species at risk within a sample (NemaSPEAR[%](metal), NemaSPEAR[%](organic)), were calculated from independent data sets obtained in field and experimental studies and showed good correlations with the toxic potential (field data) or chemical concentrations (microcosm data). NemaSPEAR[%] indices for metal and organic pollution were therefore judged to be suitable for assessing the impact of chemical contamination of freshwater soft sediments.     

Monitoring of Bt-Maize pollen exposure in the vicinity of the nature reserve Ruhlsdorfer Bruch in northeast Germany 2007 to 2008

Background, aim, and scope Basically, technological innovations are associated with benefits and risks. This is also true for the introduction of genetically modified organisms (GMO) into agriculture. In Germany, precautionary regulations currently demand isolation distances (i.?e. buffer zones) for the cultivation of genetically modified maize (Bt-maize) in the vicinity of conventional (150?m) and organic maize fields (300?m). The Bt-toxin may harm non-target organisms (NTO) such as Lepidoptera. Despite this, corresponding regulations for the protection of nature reserves are lacking to date. Conventional and Bt-maize have been grown in the vicinity of the Flora-Fauna-Habitat (FFH) Ruhlsdorfer Bruch in Brandenburg, Germany. The aim of this study was to investigate whether exposure of maize pollen from surrounding Bt-maize fields to NTOs in the nature protection area could be excluded or not. Two types of exposure were investigated: Firstly, whether maize pollen was dispersed by wind into the nature reserve area exposing resident NTOs. Secondly, foraging NTOs from the nature reserve are exposed by roaming the surrounding fields and collecting maize pollen. In order to fulfil the precautionary principle defined by law, the study should help to determine appropriate isolation distances for the cultivation of Bt-maize with regard to sustainable protection of NTOs in the FFH Ruhlsdorfer Bruch. In 2007, the local authorities issued an isolation distance between Bt-maize fields and nature reserves of 100?m and in 2008, this became 250?m in the northern and 500?m in the westerly direction, respectively. Materials and methods Standardised methods for biological and technical pollen sampling issued by the Association of German Engineers (VDI 4330 Part 3, 2007 and VDI 4330 Part 4, 2006) were applied providing a quality controlled and methodologically harmonised database which does not only serve the needs to be fulfilled by the present case-specific monitoring study but can also be used as a reference database for further investigations. Maize pollen exposure was measured within the FFH Ruhlsdorfer Bruch and its immediate vicinity in July and August 2007 and 2008. In 2007, the sampling was performed at three sites using 12 technical samplers (Sigma-2/PMF) placed at five measuring points at distances from 5?m to 120?m from the maize field edges. Additionally, for biological pollen sampling six bee colonies were situated at these three sites (two colonies at each site). The technical sampler Sigma-2/PMF enables point sampling which is primarily influenced by wind and topography providing information on effective maize pollen input (flow and deposition) at the measuring sites. Honey-bees roaming in the surrounding area with typical foraging distances of several kilometres may act as planar collectors. They may serve as indicators for the exposure to pollen-collecting NTOs. Furthermore, biological sampling is more selective due to the organism’s preferences, whereas the technical sampling is neutral. Hence, both the technical and the biological sampling complement each other in their scope of application. The pollen samples of both matrices were analysed microscopically and the maize pollen loads were quantified. Pollen-DNA was analysed by means of the quantitative PCR-method (qPCR) identifying conventional and Bt-maize pollen by two independent laboratories. In 2008, the monitoring was repeated with additional sites. Eighteen technical samplers were exposed at five sites with eight measuring points at distances from 5?m to 250?m from the maize field edges. Two honey-bee colonies for biological sampling were placed at one site for control purposes. PCR-analyses were performed to measure the amounts of Bt-maize pollen in the samples. Results The results of pollen monitoring at the Ruhlsdorfer Bruch revealed maize pollen exposure for all monitoring sites in both surveys. In 2007, up to 1.75 million maize pollen/m² were deposited at sites closest to the maize field. At 120?m from field edge in the middle of the FFH-reserve, 99,000 maize pollen/m² were detected. In 2008, similar results were found, at distances up to 250?m from the field edges deposition of 164,000 maize pollen/m² was detected. Data on maize pollen deposition show a clear distance relationship and are in accordance with results of further comprehensive surveys based on the same methodology (Hofmann 2007). The results of the microscopic analysis of the pollen pellets demonstrated that bees collected maize pollen at all sites, in 2007 and 2008. Although maize pollen is not the main food source (2007:0.1–0.3?%; 2008:2–3?%) the collection efficiency of the bee colonies resulted in high amounts of sampled maize pollen with 4 to 11 million per site in 2007 and up to 467 million in 2008. Molecular-biological analysis of maize pollen DNA by qPCR demonstrated that transgenic Bt-MON810 DNA was present in all technical and biological samples, corroborated by two independent laboratories. In 2007, the GMO-content in the samples ranged up to 44?% in the bioaerosols and 49?% in the pollen pellets. In 2008, GMO-proportions of up to 18?% were detected. Discussion The results of this study provide evidence that NTOs in the Ruhlsdorfer Bruch were exposed to Bt-maize pollen under the cultivation conditions in 2007 with a buffer zone of 100?m. The GMO-content reached up to 48?%. The results of the monitoring in 2008 confirmed these findings. Even though the exposure could be reduced by increasing the isolation distances to 250?m and 500?m respectively, the results still show percentages of up to 18?% Bt-MON810 in the pollen samples. The results on maize pollen deposition at the Ruhlsdorfer Bruch in 2007 and 2008 correspond to the results of an investigation which was conducted over several years applying the same standardised method, but covering a wider range of distances. The correlation between maize pollen deposition (n/m²) and distance to the source field (m) fitted best to a power function of the type y = 1.2086 · 10⁶ · x ^–0.548. Despite the same trend, the pollen deposition in the Ruhlsdorfer Bruch revealed above-average findings. Also the analysis of the pollen pellets collected by the bees showed an exposure in 2007 with values for the GMO-content of up to 49?%. For both methods, the exposure decreased in 2008 due to the greater buffer zones up to 500?m. Whereas the GMO-content for the biological sampling were reduced to values below 10?%, the values for the technical sampling were still higher indicating that greater buffer zones would be necessary for safety reasons under the precautionary principle. Conclusions The results of this investigation proved that maize pollen were dispersed by wind to distances farther than 250?m from field edge leading to maize pollen exposure in the centre of the nature reserve. The results also demonstrated that foraging NTOs living in the nature reserve were exposed to maize pollen from surrounding fields. Considering the cultivation of Bt-maize MON810, the assumption of the Environmental Risk Assessment (ERA) that there will be no relevant exposure beyond the Bt-maize fields, cannot be confirmed. Considering the results of this and related studies and with respect to the precautionary principle, one can state that buffer zones between Bt-maize fields and protected areas are an effective measure to minimise the exposure of Bt-maize pollen to NTOs and, thus, to prevent from adverse effects. Recommendations and perspectives Because of still insufficient ecotoxicological data for the risk assessment of Bt-maize MON810 considering butterflies and other protected NTOs, protection standards assuring the precautionary principle have to be implemented to avoid Bt-maize pollen exposure to NTOs. This applies for the case Ruhlsdorfer Bruch and for nature reserve areas in general. In order to exclude risks to protected NTOs occurring in nature reserves, sufficient buffer zones for Bt-maize cultivation should be considered. The statistical analysis revealed that distances of more than 500?m are necessary to decisively reduce exposure to foraging insects. In fact, distances of more than 1,000?m are necessary to prevent maize pollen deposition from values above 100,000 pollen/m² with a certainty of 90?%. An adequate risk assessment can only be attained if based on field measurements accounting for the high variation of pollen deposition due to local environmental site conditions and field management. The monitoring should be based on standardised methods. It should include locations with the highest expected deposition rates, the boundaries of the protected areas and sites of interest within those boundaries, e.?g., specific habitats of sensitive species.     

Global Warming: Risk Perception and Risk-Mitigating Behavior in Japan

Global warming is a major concern for the Japanese public. However, because the influence of global environmental risks, particularly global warming, is long-term and widespread, it seems difficult for the public to recognize it as a familiar and important problem that necessitates firm action. This study attempts to determine the causal structure promoting risk-mitigating behavior with regard to global warming, using Covariance Structure Analysis (CSA) with data from a survey of a subset of the Japanese population. We model the causal structure promoting risk-mitigating behavior population. There are four main stages in the process of decision-making for and values, risk perception, mitigating behavior intention, and personal environmental policies has three stages: concerns and values, risk perceptions, ectively accelerate the public’s participation in policy decisions, by translating their risk-mitigating into practical actions. Increased knowledge through improved access should improve the interaction between the public and environmental policy-makers with regard to global warming, using CSA with data from a survey of a subset of the Japanese personal actions: concerns actions. Support for andmitigating behavior intentions. Our results suggest that improved access to information concerning the risks associated with global warming in particular, and environmental issues in general, will be sufficient to effintentions for to information in Japan.     

GVO-Pollenmonitoring zum Bt-Maisanbau im Bereich des NSG/FFH-Schutzgebietes Ruhlsdorfer Bruch

Aim and Background Precautionary regulations for the production of genetically modified crops (Gentechnik-Pflanzenerzeugungsverordnung, GenTPflEV 2008) provide isolation distances for the cultivation of genetically modified maize – Bt-maize – in the vicinity of conventional maize cultivation (150?m) as well as of organic maize cultivation (300?m). Nature reserves are not included. The aim of this study was to investigate whether maize pollen of surrounding fields were dispersed in the Flora-Fauna-Habitat (FFH) Ruhlsdorfer Bruch. In the vicinity of the nature reserve Bt-maize species MON 810 as well as conventional maize was grown. The survey should provide appropriate isolation distances for the cultivation of Bt-maize with regard to sustainable protection of non-target-organisms (NTO) in the Ruhlsdorfer Bruch. Materials and Methods The collection of maize pollen in the Ruhlsdorfer Bruch was carried out at three sampling sites in the FFH or rather in the immediate vicinity in July and August 2007 by means of twelve technical and three biological pollen samplers. The technical samplers Sigma-2/PMF enable point sampling. They are primarily influenced by wind and topography and provide information about the effective entry, the maize pollen flow and the maize pollen deposition at the location of the sampler. Honey bees roam over longer distances and are hence planar collectors. Thus, they also provide information about the plants blooming in a distinct area. Furthermore, the biological preferences during the collection are captured, whereas a technical sampler does not perform a species dependent selection. Hence, both the technical and the biological samplers complement one another in their scope of application. The pollen samples were identified microscopically, enumerated quantitatively, and the pollen-DNA was analysed by means of the PCR-method. Results All monitoring sites at the Ruhlsdorfer Bruch revealed maize pollen entries. The pollen deposition reached values of 1.75 million maize pollen/m² in the close-up range. The monitoring sites located 120?m within the protected area still featured 99,000 maize pollen/m². As shown by the statistical analysis, at a distance of 1,000?m still 28,000 maize pollen/m² must be expected. The results of the microscopic pollen analysis of the pollen pellets proved that the bees collect maize pollen at all three sites. Although maize pollen is not the main food source the high collection efficiency of the bees resulted in large amounts of introduced pollen. The biomolecular proof of pollen-DNA in the field samples was corroborated by analogue results for both the technical and biological pollen sampling by two independent laboratories. The results of these quality controlled analyses gave unambiguous evidence that under the cultivation conditions in 2007 an entry of Bt-maize pollen into the FFH Ruhlsdorfer Bruch was existent. Discussion The maize pollen deposition at the Ruhlsdorfer Bruch corresponds with additional supra-regional investigations which were conducted over several years with the same method. However, the pollen entries into the Ruhlsdorfer Bruch are above-average. Possible reasons are the size of the maize fields (>?10?ha), the geographical collocation between maize fields and protected area (lee location, through-shaped, thermal currents) as well as weather conditions and maize bloom during the sampling period July and August 2007. A distance of 1,000?m or more is necessary to avoid maize pollen deposition of more than 100,000/m² with a probability of 90?%. Conclusions The results of this investigation prove an entry of Bt-maize pollen into the FFH under the cultivation and weather conditions in summer 2007. According to the results of this and related studies and considering precautionary principle and the effect terms defined in the Federal Immission Protection Law, it becomes clear that reasonable isolation distances between Bt-maize fields and protected areas have to be introduced in order to minimise the entry of GM-maize pollen and to prevent adverse effects on protected NTOs. Recommendations Due to the fact that no toxicological investigations are available for the butterflies occurring in the FFH, highest protection standards should be implemented to avoid Bt-maize pollen entries into the Ruhlsdorfer Bruch. That implies that highest possible isolation distances for Bt-maize cultivation have to be considered, but at least a distance of 1,000?m is recommended. Following this a maize pollen deposition of more than 100,000 maize pollen/m² should be pevented with a certainty of 90?% as well as an exceeding exposure of foraging insects. Outlook By means of the pollen monitoring it becomes possible to survey empirically defined limits of pollen exposure. This should be performed in the nature reserve area at sites of expected maximum exposure, e.?g. at the boundaries of the FFH towards the maize fields and at exposed sites.     

Evaluating internalization of multifunctionality by farm diversification: evidence from educational dairy farms in Japan

Farm diversification by farmers' open-door policy generates opportunities for farmers to internalize externalities of multifunctionality. Although the educational function of agriculture is an example of such an open-door policy and is attracting growing attention, this function has been little explored. To promote farm diversification in this direction, this paper examined how and to what degree farmers internalize externalities of multifunctionality by focusing on the educational function provided by dairy farming, i.e., farming experience services, in Japan. The main findings were as follows. First, we can say that the educational function is determined by ordinary technical jointness as well as institutional jointness, which is represented by food culture and the agrarian heritage. Both the technical and institutional jointness enhanced the externality. Because of these two working factors, there is a U-shaped relationship between farm diversification and provision of farming experience services. Second, however, an empirical evaluation indicated that farmers only partially internalize educational externalities by treating them as supplementary services combined with processed milk products. Therefore, appropriate integrated management of these newly emerging educational services to become a viable market should be fully addressed in the future, especially for family farms.     

Triclosan—the forgotten priority substance?

Introduction  

Triclosan (TCS) is a multi-purpose biocide. Its wide use in personal care products (PCPs) fosters its dispersal in the aquatic environment. Despite enhanced awareness of both scientists and the public in the last decade with regard to fate and effects, TCS received little attention regarding its prioritisation as a candidate river basin-specific pollutant or even priority substance, due to scarce monitoring data.