Infrared thermography reveals effect of working posture on skin temperature in office workers

Introduction. Musculoskeletal symptoms related to using traditional computer workstations are common. Quantitative methods for measuring muscle stress and strain are needed to improve ergonomics of workstations. We hypothesize that infrared thermography (IRT) is suited for this purpose. Methods. This hypothesis was evaluated by estimating muscle activity in upright and traditional working postures with IRT and surface electromyography (sEMG). IRT and sEMG measurements were conducted in 14 female participants with both working postures. First, measurements with the traditional posture were performed. Later, participants had 1?month to adjust to the upright working posture before repeating the measurements. IRT images were acquired before and after a full working day, with sEMG recordings being conducted throughout the measurement days. Participants evaluated their neck pain severity using neck disability index (NDI) questionnaires before the first and after the second measurement day. Results. Spatial variation in upper back temperature was higher (p?=?0.008) when working in traditional posture and the upright working posture reduced (p?p?=?0.003) after working in the upright posture. Conclusion. IRT was found suitable for evaluating muscle activity and upright working posture to reduce the NDI and muscle activity in the upper back.     

A high-definition spatially explicit modelling approach for national greenhouse gas emissions from industrial processes: reducing the errors and uncertainties in global emission modelling

Mitigation and Adaptation Strategies for Global Change - Industrial processes cause significant emissions of greenhouse gases (GHGs) to the atmosphere and, therefore, have high mitigation and...     

Errors and uncertainties in a gridded carbon dioxide emissions inventory

Emission inventories (EIs) are the fundamental tool to monitor compliance with greenhouse gas (GHG) emissions and emission reduction commitments. Inventory accounting guidelines provide the best practices to help EI compilers across different countries and regions make comparable, national emission estimates regardless of differences in data availability. However, there are a variety of sources of error and uncertainty that originate beyond what the inventory guidelines can define. Spatially explicit EIs, which are a key product for atmospheric modeling applications, are often developed for research purposes and there are no specific guidelines to achieve spatial emission estimates. The errors and uncertainties associated with the spatial estimates are unique to the approaches employed and are often difficult to assess. This study compares the global, high-resolution (1 km), fossil fuel, carbon dioxide (CO₂), gridded EI Open-source Data Inventory for Anthropogenic CO₂ (ODIAC) with the multi-resolution, spatially explicit bottom-up EI geoinformation technologies, spatio-temporal approaches, and full carbon account for improving the accuracy of GHG inventories (GESAPU) over the domain of Poland. By taking full advantage of the data granularity that bottom-up EI offers, this study characterized the potential biases in spatial disaggregation by emission sector (point and non-point emissions) across different scales (national, subnational/regional, and urban policy-relevant scales) and identified the root causes. While two EIs are in agreement in total and sectoral emissions (2.2% for the total emissions), the emission spatial patterns showed large differences (10~100% relative differences at 1 km) especially at the urban-rural transitioning areas (90–100%). We however found that the agreement of emissions over urban areas is surprisingly good compared with the estimates previously reported for US cities. This paper also discusses the use of spatially explicit EIs for climate mitigation applications beyond the common use in atmospheric modeling. We conclude with a discussion of current and future challenges of EIs in support of successful implementation of GHG emission monitoring and mitigation activity under the Paris Climate Agreement from the United Nations Framework Convention on Climate Change (UNFCCC) 21st Conference of the Parties (COP21). We highlight the importance of capacity building for EI development and coordinated research efforts of EI, atmospheric observations, and modeling to overcome the challenges.

     

Characteristics of applicator exposure to synthetic pyrethroid in ULV-handheld and ULV-ULA spray applications

The technique of ultra-low volume by ultra-light aircraft for pesticide spray application has been discussed for some time in North America, mainly due to the air worthiness of such an aircraft which was not designed to carry appreciable amounts of payload. The risk factor of such application in insect control has not been determined, while applicator exposure to insecticide in ULV application by manual sprayer was assessed. An attempt was made to produce, by a series of field exposure measurements, a set of applicator exposure data for ULV-ULA and to compare the results with the data produced in synthetic pyrethroid application by using a hand-held ULV applicator. The applicator exposure of hand-held operation resulted in as high as 1000 times the exposure of aerial applicators indicating the effect of work practices and man-machine relationships. A delineation of toxic dose for these two types of applications shows that the aerial application could provide some benefits in reducing applicator exposure potential.     

The use of plate heat exchangers to improve energy efficiency in phosphoric acid production

This paper originated as a part of a comprehensive research project designed to develop ecologically sustainable, environmentally friendly, resource- and energy-saving industrial process technology for the production of a wide class of phosphorus containing substances. The essential feature of the research was designed for the replacement of tubular heat exchangers with Plate heat exchangers (PHEs) and for the installation of these units in new locations in the processes to optimally improve energy efficiency and to prevent pollution. Despite the severe operating conditions in the production of phosphoric acid PHEs of various designs find the application in these processes. For such a corrosive environment as a phosphoric acid production plant, the Hastelloy G30 alloy is used as the material for the plates and synthetic rubber EPDM is used as the material for inter-plate gaskets. The analysis of the data shows, that using mixed groupings of plates in the unit allows one to obtain optimal solutions. The simulation of barometric mixing condenser recycled water cooling with plate heat exchanger shows the possibility of an application which minimizes the waste water pollution by closing the condenser cooling water circuit. Software was developed for calculations of units working both with liquid and phase changing streams.     

Development of a high-resolution spatial inventory of greenhouse gas emissions for Poland from stationary and mobile sources

Greenhouse gas (GHG) inventories at national or provincial levels include the total emissions as well as the emissions for many categories of human activity, but there is a need for spatially explicit GHG emission inventories. Hence, the aim of this research was to outline a methodology for producing a high-resolution spatially explicit emission inventory, demonstrated for Poland. GHG emission sources were classified into point, line, and area types and then combined to calculate the total emissions. We created vector maps of all sources for all categories of economic activity covered by the IPCC guidelines, using official information about companies, the administrative maps, Corine Land Cover, and other available data. We created the algorithms for the disaggregation of these data to the level of elementary objects such as emission sources. The algorithms used depend on the categories of economic activity under investigation. We calculated the emissions of carbon, nitrogen sulfure and other GHG compounds (e.g., CO₂, CH₄, N₂O, SO₂, NMVOC) as well as total emissions in the CO₂-equivalent. Gridded data were only created in the final stage to present the summarized emissions of very diverse sources from all categories. In our approach, information on the administrative assignment of corresponding emission sources is retained, which makes it possible to aggregate the final results to different administrative levels including municipalities, which is not possible using a traditional gridded emission approach. We demonstrate that any grid size can be chosen to match the aim of the spatial inventory, but not less than 100 m in this example, which corresponds to the coarsest resolution of the input datasets. We then considered the uncertainties in the statistical data, the calorific values, and the emission factors, with symmetric and asymmetric (lognormal) distributions. Using the Monte Carlo method, uncertainties, expressed using 95% confidence intervals, were estimated for high point-type emission sources, the provinces, and the subsectors. Such an approach is flexible, provided the data are available, and can be applied to other countries.

     

A comparison of fish tissue mercury concentrations from homogenized fillet and nonlethal biopsy plugs

The use of biopsy plugs to sample fish muscle tissue for mercury analyses is a viable alternative to lethal sampling; however, the practice has yet to be widely implemented in routine monitoring due to concerns about variability of mercury concentrations in fish muscle tissues. Here we examine distribution of mercury in fillets of four fish species (Walleye, Northern Pike, Smallmouth Bass and Lake Trout), suitability of left/right side of fillet for biopsy sampling, and appropriateness of re-using a biopsy punch. The results showed that average mercury concentrations in left and right fillets of fish are similar. Mercury concentrations in biopsy plug samples, taken from the anterior dorsal area of the fish fillet, were statistically equivalent to the mercury concentrations in homogenized fillets. There was no discernible cross contamination between samples when a biopsy punch was reused after washing in hot soapy water, and as such, biopsy punches can be recycled during sampling to reduce the sampling cost. If a tissue mass collected from a specific site on the fillet is insufficient, then we suggest sampling corresponding locations on the other fillet rather than sampling two adjacent sites on one fillet to obtain more tissue. The results presented here can improve the accuracy of fillet biopsy plug sampling, minimize fish mortality for mercury monitoring, and reduce labor and material costs in monitoring programs.