EFFECTIVENESS OF POLYACRYLAMIDE (PAM) IN IMPROVING RUNOFF WATER QUALITY FROM CONSTRUCTION SITES1

ABSTRACT: Erosion from construction sites significantly affects water quality in receiving streams. A rainfall simulator was used to evaluate the effectiveness of different methods for controlling erosion from construction sites. Erosion control methods investigated included dry and liquid applications of polyacrylamide (PAM), hydroseed, and straw mulch. Fertilizer was also applied to each plot to examine the effectiveness of the methods in reducing nutrient losses in runoff. Runoff samples were analyzed for total suspended solids (TSS), nitrate, total Kjeldahl nitrogen (TKN), ammonium, total phosphorus (TP), and orthophosphate. Among all treatments investigated, straw mulch was the most effective treatment for controlling TSS and nutrient losses during short term and long term simulations. The low liquid PAM (half the recommended PAM) treatment resulted in the highest reduction in runoff, TSS bound nitrogen, and total nitrogen (TN) concentrations and loadings. The study results indicate that a high application rate (twice the recommended rate) of PAM could actually increase runoff and TSS losses. At a low application rate, both liquid and dry PAM were effective in reducing TSS and nutrient losses in runoff. However, application of the liquid form of PAM to construction sites is more practical and perhaps more economical than applying the PAM in the dry form.     

Job level risk assessment using task level strain index scores: a pilot study.

This paper explores 2 methods of modifying the Strain Index (SI) to assess the ergonomic risk of multi-task jobs. Twenty-eight automotive jobs (15 cases and 13 controls) were studied. The first method is based on the maximum task SI score, and the second method is modeled on the NIOSH Composite Lifting Index (CLI) algorithm, named cumulative assessment of risk to the distal upper extremity (CARD). Significant odds ratios of 11 (CI 1.7-69) and 24 (CI 2.4-240) were obtained using the modified maximum task and CARD, respectively. This indicates that modification of the SI may be useful in determining the risk of distal upper extremity injury associated with a multi-task job.     

Sustainability and comanagement of subsistence hunting in an indigenous reserve in Guyana

Although hunting is a key component of subsistence strategies of many Amazonians, it is also one of the greatest threats to wildlife. Because indigenous reserves comprise over 20% of Amazonia, effective conservation often requires that conservation professionals work closely with indigenous groups to manage resource use. We used hunter‐generated harvesting data in spatially explicit biodemographic models to assess the sustainability of subsistence hunting of indigenous Waiwai in Guyana. We collected data through a hunter self‐monitoring program, systematic follows of hunters, and semistructured interviews. We used these data to predict future densities of 2 indicator species, spider monkeys (Ateles paniscus) and bearded sakis (Chiropotes sagulatus), under different scenarios of human population expansion and changing hunting technology. We used encounter rates from transect surveys and hunter catch‐per‐unit effort (CPUE) to validate model predictions. Paca (Cuniculus paca) (198 /year), Currosaw (Crax alector) (168), and spider monkey (117) were the most frequently harvested species. Predicted densities of spider monkeys were statistically indistinguishable from empirically derived transect data (Kolmogorov–Smirnov D = 0.67, p = 0.759) and CPUE (D = 0.32, p = 1.000), demonstrating the robustness of model predictions. Ateles paniscus and C. sagulatus were predicted to be extirpated from <13% of the Waiwai reserve in 20 years, even under the most intensive hunting scenarios. Our results suggest Waiwai hunting is currently sustainable, primarily due to their low population density and use of bow and arrow. Continual monitoring is necessary, however, particularly if human population increases are accompanied by a switch to shotgun‐only hunting. We suggest that hunter self‐monitoring and biodemographic modeling can be used effectively in a comanagement approach in which indigenous parabiologists continuously provide hunting data that is then used to update model parameters and validate model predictions.     

Designing and Implementing a Network for Sensing Water Quality and Hydrology across Mountain to Urban Transitions

Water resources are increasingly impacted by growing human populations, land use, and climate changes, and complex interactions among biophysical processes. In an effort to better understand these factors in semiarid northern Utah, United States, we created a real‐time observatory consisting of sensors deployed at aquatic and terrestrial stations to monitor water quality, water inputs, and outputs along mountain to urban gradients. The Gradients Along Mountain to Urban Transitions (GAMUT) monitoring network spans three watersheds with similar climates and streams fed by mountain winter‐derived precipitation, but that differ in urbanization level, land use, and biophysical characteristics. The aquatic monitoring stations in the GAMUT network include sensors to measure chemical (dissolved oxygen, specific conductance, pH, nitrate, and dissolved organic matter), physical (stage, temperature, and turbidity), and biological components (chlorophyll‐a and phycocyanin). We present the logistics of designing, implementing, and maintaining the network; quality assurance and control of numerous, large datasets; and data acquisition, dissemination, and visualization. Data from GAMUT reveal spatial differences in water quality due to urbanization and built infrastructure; capture rapid temporal changes in water quality due to anthropogenic activity; and identify changes in biological structure, each of which are demonstrated via case study datasets.     

Modeling and data assessment of longitudinal salinity in a low-gradient estuarine river

Continuous data of vertical-profile salinity were analyzed for four stations located successively upriver in a macrotidal estuary, the lower St. Johns River (Northeast Florida, USA). The data analysis confirmed well-mixed salinity conditions in the river with at most 1.3 ppt of vertical variability at Dames Point (river km 20), where the main variations of salinity are along the longitudinal axis of the river. Given the well-mixed salinity conditions and dominant horizontal structure of salinity variations in the river, we present and apply a barotropic, two-dimensional modeling approach for hydrodynamic-salinity transport simulation in the lower St. Johns River. When properly forced by offshore surge, high-resolution wind fields and freshwater river inflows, the model replicated the salinity measurements remarkably well, including the separation into tidal and sub-tidal components. The data and model results show that, at times, offshore winds and surge can be more influential on longitudinal salinity variations than local winds over the river. We demonstrate the importance of using proper boundary conditions to force the model relative to the minimal sensitivity of the model to parameter adjustment of horizontal mixing and uncertainty-based perturbation of wind and inflow forcings.     

Determination of specific gravity of municipal solid waste

This investigation was conducted to evaluate experimental determination of specific gravity (G_s) of municipal solid waste (MSW). Water pycnometry, typically used for testing soils was adapted for testing MSW using a large flask with 2000 mL capacity and specimens with 100–350 g masses. Tests were conducted on manufactured waste samples prepared using US waste constituent components; fresh wastes obtained prior and subsequent to compaction at an MSW landfill; and wastes obtained from various depths at the same landfill. Factors that influence specific gravity were investigated including waste particle size, compaction, and combined decomposition and stress history. The measured average specific gravities were 1.377 and 1.530 for as-prepared/uncompacted and compacted manufactured wastes, respectively; 1.072 and 1.258 for uncompacted and compacted fresh wastes, respectively; and 2.201 for old wastes. The average organic content and degree of decomposition were 77.2% and 0%, respectively for fresh wastes and 22.8% and 88.3%, respectively for old wastes. The G_s increased with decreasing particle size, compaction, and increasing waste age. For fresh wastes, reductions in particle size and compaction caused occluded intraparticle pores to be exposed and waste particles to be deformed resulting in increases in specific gravity. For old wastes, the high G_s resulted from loss of biodegradable components that have low G_s as well as potential access to previously occluded pores and deformation of particles due to both degradation processes and applied mechanical stresses. The G_s was correlated to the degree of decomposition with a linear relationship. Unlike soils, the G_s for MSW was not unique, but varied in a landfill environment due both to physical/mechanical processes and biochemical processes. Specific gravity testing is recommended to be conducted not only using representative waste composition, but also using representative compaction, stress, and degradation states.     

Collective risk management: insights and opportunities for DoD decision-makers

Individuals make decisions every day in group contexts which vary in size, structure, and purpose. The US Department of Defense (DoD) is a large organization composed of many groups, and like many organizations, it has a vested interest in improving the performance of its affiliated groups, especially as it concerns risk-informed decision-making. This article discusses current foibles and considerations for decision-making in DoD groups as identified through a workshop with experts in risk-informed decision-making, cognitive science, and military operations. Experts noted that terms associated with risk-informed decision-making were often misconstrued, that formal decision-making frameworks are underutilized, and that many considerations should be taken into account when attempting to improve decision-making performance.     

Prompting safety-belt use in the context of a belt-use law: the flash-for life revisited

PROBLEM: Safety-belt use reduces motor vehicle crash-related morbidity and mortality, yet an estimated 18% of drivers do not consistently buckle up (NHTSA, 2005). In 1985, Geller and colleagues developed an interpersonal Flash-for-Life prompt that increased belt use among 22% of 1,087 unbuckled drivers (Geller, Bruff, & Nimmer, 1985). METHOD: The Flash-for-Life intervention was re-introduced at a large university with high safety-belt use (i.e., 80%). College students stood at parking-lot entrance/exits and "flashed" signs with the message, "Please Buckle Up, I Care" to unbuckled drivers. RESULTS: Of 427 unbuckled drivers observed, 30% of these complied with the prompt. Male drivers were significantly more likely to comply with prompts delivered by females. DISCUSSION: Compliance was higher than in the 1985 study, indicating a high baseline rate of safety-belt use does not negate potential beneficial influence of a prompting intervention. This intervention is particularly effective with college-aged males, a sub-group of the driving population least likely to buckle-up. IMPACT ON INDUSTRY: A simple behavioral prompt could be used at most industrial complexes to increase safety-belt use among vehicle occupants who are not buckled-up.     

Some observations on copper yields and ore grades

The paper examines trends in the average copper content of mined ores over the years. It has tended to decline over the long term, but by no means evenly. US averages are not typical of global averages, at least in the past four decades. Those have been both higher, and less volatile than in the US. One reason for falling averages is a change in the type of deposit mined, with a rise in the share of relatively low grade porphyry deposits. The different nature of their deposits is reflected in marked differences in grades between the different continents. African and Australian average grades are higher than the global average, and changes in the share of Central Africa in global output have affected the global average grade. Yields are have been consistently lower in North America than elsewhere, and Latin American average grades have trended downwards, reflecting both the ageing of mines and the rising share of production from porphyry deposits. Typically the yield of mines declines over time as mining proceeds. The average copper content of ore deposits is usually below the average yield of the ore accessed in the early years of production. The initial grades of new mines have not declined over the past forty years, and there has been no perceptible tendency for the average grade of porphyry deposits brought into production to decline over time. There is no apparent correlation between average grade and deposit size, but mine operators tend to exploit economies of scale to offset low grades. The relationship between the annual percentage yields (the head grade) and the reserve grades of deposits is not static. In recent years head grades have fallen closer to reserve grades. The relationship may be affected by movements in metal prices. Although the evidence about the influence of prices is not clear-cut, it does suggest that prices and cut-off grades may be inversely related. As many ores contain other valuable metals besides copper, copper yields will sometimes be subordinated to the extraction of these other metals. Copper equivalent grades have not moved in the same way as copper grades alone.