Analysis of the recycling system for aluminum cans,focusing on collection,transportation, and the intermediate processing methods

In this article, the systems for the collection and intermediate processing of used beverage cans (UBCs) are compared and analyzed, focusing on the time taken and the cost of processing, the energy consumption, and the emissions of CO₂, SO _x , and NO _x , during the process. We found that cases where the UBCs were crushed in the discharging process gave better results, and how the UBCs were collected was the most important factor. It was more desirable to treat UBCs in one place than in two places. When the transportation distance was longer, the pressed form of UBCs was more convenient. When the transportation distance was short, the original form, the crushed form, and the shredded form of UBCs were all suitable. That is, the contribution of the transportation process to the evaluation was large when the transport distance was long, and the contribution of the treatment process was large when the transport distance was short.     

Water purification with sintered porous materials fabricated at 400℃ from sea bottom sediments

A sintering technology for preparing porous materials from sea bottom sediments was developed for use in water purification. The purpose of the present study was to develop methods for converting the sea bottom sediments dredged from Ago Bay into value-added recycled products. The sintered products fabricated at 400℃ were found to be very effective adsorbents for the removal of heavy metals.     

A study on the self-assembly behavior of dark materials from molasses

We have previously demonstrated that dark materials (DM) in acidified molasses are effectively adsorbed to Amberlite XAD7HP resin and are eluted from the resin with 0.1 M sodium hydroxide. In this paper, we have characterized the self-assembly behavior of molasses DM by using dynamic and static light scattering in combination with isoelectric focusing and infrared absorption spectroscopy in order to better understand the resin adsorption mechanism. One of DM derivatives, X-G2, contained carboxyl and hydroxyl groups and had a weight-average molar mass of 9.39?×?10³ to 4.42?×?10⁴ at pH 2.1–11.5. The aggregates retained their spherical shape over the full pH range and the large gyration radius (66.4–80.0 nm) indicated that the inner structure was loosely packed. Furthermore, X-G2 had an isoelectric point of 1.8, and its density increased sharply at pH 5.9 and then approached a nearly constant value under alkaline conditions. In summary, the self-assembly processes of DM are controlled by intermolecular hydrogen-bonding and hydrophobic interactions. The aggregates adsorb to the resin through hydrophobic interactions and are eluted when excess carboxylate anions are generated.     

Sensitive monitoring of iodine species in sea water using capillary electrophoresis: vertical profiles of dissolved iodine in the Pacific Ocean

Using a novel high-sensitivity capillary electrophoretic method, vertical distributions of iodate, iodide, total inorganic iodine, dissolved organic iodine and total iodine in the North Pacific Ocean (0-5500 m) were determined without any sample pre-treatment other than UV irradiation before total iodine analysis. An extensive set of data demonstrated that the iodine behaviour in the ocean water collected during a cruise in the North Pacific Ocean in February-March 2003 was not conservative but correlated with variations in concentrations of dissolved oxygen and nutrient elements such as silicon, nitrogen and phosphorus. This suggests that the vertical distribution of iodine is associated with biological activities. The dissolved organic iodine was found in the euphotic zone in accord with observations elsewhere in the oceans. The vertical profile of dissolved organic iodine also appears to be related to biogeochemical activity. The concentrations of all measured iodine species vary noticeably above 1000 m but only minor latitudinal changes occur below 1000 m and slight vertical alterations can be observed below 2400 m. These findings are thought to reflect the stratification of nutrients and iodine species with different biological activities in the water column.     

Analysis of atmospheric behavior of PCDDs/PCDFs by a one-compartment box model

The overall atmospheric behavior of PCDDs/PCDFs in the Kanto region, Japan, was simulated by a one-compartment box model. For each homologue the relative significance and temperature dependences of dry deposition, wet deposition, degradation, and advection in both gas and particulate phases were examined and compared. The results of the model calculation suggested that the rates for dry deposition are comparable to those for wet deposition, and the rates for advection are comparable to those for bulk (dry+wet) depositions in the Kanto region. On the other hand, the rates of degradation for PCDDs/PCDFs in the atmosphere in the Kanto region would be negligible. The emission rates and the bulk deposition fluxes in the entire Kanto region estimated by the model calculation based on observed air concentrations were 0.084-0.90 kg-TEQ/month and 0.045-0.43 kg-TEQ/month, respectively. These estimated emission rates and bulk deposition fluxes were slightly higher than the estimated emission rate based on observed emission concentrations and the estimated bulk deposition fluxes based on observed deposition fluxes collected on water deposition surface, respectively. This study showed the model calculation can be available for understanding of the overall atmospheric behavior, verification of the source inventory, and estimation of deposition flux on the actual environment including various deposition surfaces.     

Water purification with sintered porous materials fabricated at 400℃ from sea bottom sediments

A sintering technology for preparing porous materials from sea bottom sediments was developed for use in water purification. The purpose of the present study was to develop methods for converting the sea bottom sediments dredged from Ago Bay into value-added recycled products. The sintered products fabricated at 400℃ were found to be very effective adsorbents for the removal of heavy metals.     

Source and behavior analyses of dioxins based on congener-specific information and their application to Tokyo Bay basin

Identification of pollution sources and estimation of their contribution to dioxin pollution are important for taking better countermeasures against such sources. The information based on seventeen 2,3,7,8-chlorine-substituted congeners and 10 homologues is usually not sufficient for source identification. The usefulness of detailed congener-specific information of tetra- to octachlorinated polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans was examined by principal component analysis and compared with conventional dioxin information. It was revealed that congener-specific information was far more effective for source identification than conventional information. For source apportioning, it was shown that multiple regression analysis with detailed source congener profiles could be carried out successfully when calculations were performed for individual homologues. This was because of the large variation in homologue composition in source dioxin profiles in addition to the difference in environmental behavior among the homologues.The newly proposed methods for statistical analysis were applied to the estimation of dioxin mass balance in Tokyo Bay basin. It was found that Tokyo Bay sediment core contained dioxins from three major sources: combustion, pentachlorophenol (PCP), and chloronitrophen (CNP). PCP and CNP contained large amounts of dioxin as impurity and were used extensively as paddy field herbicides in Japan in the past. The total dioxin load from the two herbicides to the basin during the past 45 years (1951-1995) was estimated to be five times larger than that from combustion source in terms of toxic equivalents (WHO-TEQ). However, in the surface sediment of the bay, the contribution from the herbicides was nearly equal to that from combustion. The herbicide contribution peaked during the 1960s and 1970s and gradually decreased thereafter.     

Research for MSW flow analysis in developing nations

Developing nations have various problems regarding municipal solid waste (MSW). Therefore, to carry out a systematic review of the MSW problems in the target area and to formulate a well-considered management plan, it is extremely important to understand the present MSW flow in the region. One of the authors participated in the nine solid waste management (SWM) studies in developing nations undertaken under the technical cooperation program of the Japan International Cooperation Agency (JICA). Based on these studies, this paper reviews the results of research in developing countries regarding different MSW streams, the factors that cause the differences, and the elements considered to have the most impact on those streams. This research identifies several issues regarding MSW streams in developing nations. The MSW generation rate per capita in developing countries is generally said to grow in proportion to the GNP. However, the findings of this research show no correlation between the two; instead, there is a relationship between the GNP and the collection rate. To formulate proper future MSW management plans in countries with low collection rates, it is very important to forecast the rates of self-disposed and recycled waste, and their fluctuations. These are affected by urban structure, collection services, etc. Received: January 27, 2000 / Accepted: July 19, 2000     

Apoplastic ascorbate contributes to the differential ozone sensitivity in two varieties of winter wheat under fully open-air field conditions

We studied leaf apoplastic ascorbates in relation to ozone (O₃) sensitivity in two winter wheat (Triticum aestivum L.) varieties: Yangfumai 2 (Y2) and Yangmai 16 (Y16). The plants were exposed to elevated O₃ concentration 27% higher than the ambient O₃ concentration in a fully open-air field from tillering stage until final maturity. The less sensitive variety Y16 had higher concentration of reduced ascorbate in the apoplast and leaf tissue by 33.5% and 12.0%, respectively, than those in the more sensitive variety Y2, whereas no varietal difference was detected in the decline of reduced ascorbate concentration in response to elevated O₃. No effects of O₃ or variety were detected in either oxidized ascorbate or the redox state of ascorbate in the apoplast and leaf tissue. The lower ascorbate concentrations in both apoplast and leaf tissue should have contributed to the higher O₃ sensitivity in variety Y2.