Effect of sulfate on the methanogenic activity of a bacterial culture from a brewery wastewater during glucose degradation

The maximum specific methanogenic activity （SMA） of a sludge originating from a brewery wastewater treatment plant on the degradation of glucose was investigated at various levels of sulfate on a specific loading basis. Batch experiments were conducted in serum bottles at pH 7 and 35℃. A comparison of the values indicates that the SMA of this mixed culture was increased and reached its highest level of 0.128 g CH4 gas COD/（g VSS.d） when biomass was in contact with sulfate at a ratio of 1：0.114 by weight.     

Comparative study of heavy metal and pathogenic bacterial contamination in sludge and manure in biogas and non-biogas swine farms

The objective of this study is to determine and compare the heavy metal (Zn, Cu, Cd, Pb) and bacterial (E. coli, coliform and Salmonella spp.) contamination between swine farms utilizing biogas and non-biogas systems in the central part of Thailand. Results showed that average levels of E. coli, coliform, BOD, COD, Zn, Cu and Pb in sludge from the post-biogas pond were higher than the standard limits. Moreover, the levels of E. coli, coliform, Cd and Pb were also higher than the standard limits for dry manure. The levels of E. coli, coliform and BOD on biogas farms were lower than on non-biogas farms. Following isolation of Salmonella spp:; it was found that Salmonella serovars Rissen was the most abundant at 18.46% (12/65), followed by Anatum 12.31% (8/65), and Kedougou 9.23% (6/65). The pathogenic strains of Salmonella serovars Paratyphi B var. java and Typhimurium were present in equal amounts at 4.62% (3/65) in samples from all swine farms. This study revealed that significant reduction in E. coli and coliform levels in sludge from covered lagoon biogas systems on swine farms. The presence of Salmonella as well as Cd and Pb, in significant amount in dry manure, suggests that there is a high probability of environmental contamination if it is used for agricultural purposes. Thus, careful waste and manure disposal from swine farms and the regular monitoring of wastewater is strongly recommended to ensure the safety of humans, other animals and the environment.     

Polycyclic aromatic hydrocarbon removal from water by natural fiber sorption.

The use of two natural sorbents, kapok and cattail fibers, were investigated for polycyclic aromatic hydrocarbon (PAH) removal from water. Naphthalene, acenaphthylene, acenaphthene, fluorene, phenanthrene, anthracene, and fluoranthene were the PAHs studied. For comparative purposes, a commercial polyester fiber sorbent was included in the investigation. The PAH sorption and retention capabilities of the three fibers were determined through batch and continuous-flow experiments under non-competitive and competitive conditions. In the batch experiments, cattail fiber was the most effective sorbent. Kapok fiber provided the lowest PAH retention, while cattail fiber had slightly less PAH retention than polyester fiber. When two PAHs were present in the same system, a competitive effect on the much less hydrophobic PAH was observed. Similar results were obtained in the column experiments, except that polyester fiber performed much poorer on naphthalene. Cattail fiber is a promising sorbent for treating PAH-contaminated water, such as urban runoff.     

The environmental impact assessment of gold extraction processes for discarded computer RAM: a comparative study of two leaching chemicals

Journal of Material Cycles and Waste Management - Electrical and electronic equipment waste (WEEE) problems should be set as a priority in Thailand due to unpleasant operations. E-waste...     

Chromium Removal from Soil by Phytoremediation with Weed Plant Species in Thailand

The possibility of using phytoremediation with weed plant species in Thailand to remove chromium (Cr) from soil was investigated. Six plant species, Cynodon dactylon, Pluchea indica, Phyllanthus reticulatus, Echinochloa colonum, Vetiveria nemoralis, and Amaranthus viridis, were chosen for their abilities to accumulate total chromium (TCr) at tanning industry sites. These plant species were studied in pots at a nursery. Cynodon dactylon and Pluchea indica provided highest TCr accumulation capacities of 152.1 and 151.8 mg/kg of plant on a dry weight basis, respectively, at a pulse hexavalent Cr [Cr(VI)] input of 100 mg Cr(VI)/kg soil. Most of the Cr uptake occurred within 30 days after the input. The TCr accumulation by Pluchea indica was observed in roots, stems, and leaves at 27%, 38%, and 35% of the TCr mass uptake, respectively, whereas 51%, 49% and 0% of the TCr mass uptake accumulated in roots, stems, and leaves of Cynodon dactylon, respectively. The results on Cr accumulation and translocation in plant tissues suggest that Cr was removed mainly via phytoaccumulation and Pluchea indica is more suitable than Cynodon dactylon for the phytoremediation of Cr contaminated soil.     

Valorization of spent coffee grounds recycling as a potential alternative fuel resource in Turkey: An experimental study

In this study, recycling of spent coffee grounds (SCG) as a potential feedstock for alternative fuel production and compounds of added value in Turkey was assessed. The average oil content was found (≈ 13% w/w). All samples (before and after extraction) were tested for scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray diffraction (XRD), calorific value, surface analysis and porosity, Fourier transform infrared (FT-IR), and elemental analysis to assess their potential towards fuel properties. Elemental analysis indicated that carbon represents the highest percentages (49.59% and 46.42%, respectively), followed by nitrogen (16.7% and 15.5%), hydrogen (6.74% and 6.04%), and sulfur (0.851% and 0.561%). These results indicate that SCG can be utilized as compost, as it is rich in nitrogen. Properties of the extracted oil were examined, followed by biodiesel production. The quality of biodiesel was compared with American Society for Testing and Materials (ASTM) D6751 standards, and all the properties complied with standard specifications. The fatty acid compositions were analyzed by gas chromatography. It was observed that coffee waste methyl ester (CWME) is mainly composed of palmitic (35.8%) and arachidic (44.6%) acids, which are saturated fatty acids. The low degree of unsaturation provides an excellent oxidation stability (10.4 hr). CWME has also excellent cetane number, higher heating value, and iodine value with poor cold flow properties. The studies also investigated blending of biodiesel with Euro diesel and butanol. Following this, a remarkable improvement in cloud and pour points of biodiesel was obtained. Spent coffee grounds after oil extraction is an ideal material for garden fertilizer, feedstock for ethanol, biogas production, and as fuel pellets. The outcome of such research work produces valuable insights on the recycling importance of SCG in Turkey.

Implications: Coffee is a huge industry, and coffee has been widely used due to its refreshing properties. This industry generates large quantities of waste. Therefore, recycling of spent coffee grounds for producing alternative fuels and compounds of added value is crucial. Elemental analysis indicated that coffee waste can be utilized as compost, as it is rich in nitrogen. Coffee waste after oil extraction is an ideal feedstock for ethanol and biogas production, garden fertilizer, and as fuel pellets. The low degree of unsaturation provides excellent oxidation stability. Its biodiesel has also excellent cetane number, higher heating value, and lower iodine value.     

Adsorption of single and mixed haloacetonitriles on silica-based porous materials: Mechanisms and effects of porous structures

Adsorption mechanisms and the role of different porous and crystalline structures on the removal of five haloacetonitriles (HANs) over hexagonal mesoporous silica (HMS), titanium substituted mesoporous silica (Ti-HMS), rod-shaped SBA-15 and microporous zeolite NaY were investigated. In addition, the effect of pH on adsorption mechanism and selective adsorption of five HANs individually and in an equimolar mixed solution were evaluated. The results indicated that the intraparticle diffusion rate constants of the mesoporous adsorbents were higher than that of the microporous NaY. In single solute, the order of adsorption preference (highest to lowest) was mono-HANs?>?di-HANs?>?tri-HAN. However, in mixed solute, the large molecular weight of the tri-HAN and di-HANs are more easily adsorbed than the smaller molecular weight mono-HANs. Except for SBA-15, the order of adsorption capacities in mixed HANs solute was not different compared to that observed for the single HAN solute, which might be caused by the higher accessibility to the active sites due to larger pore size. The ion-dipole electrostatic interaction was likely to be the main adsorption mechanism, and was favored at high pH values due to the high negative surface charge density of the adsorbent. The molecular structure of the HANs and hydrophilic/hydrophobic nature affected the adsorption capacities and their selective adsorption from mixed solutes.