Guarana improves behavior and inflammatory alterations triggered by methylmercury exposure: an in vivo fruit fly and in vitro neural cells study

Environmental Science and Pollution Research - Methylmercury (MeHg) is a well-known environmental pollutant associated with neurological and developmental deficits in animals and humans. However,...     

Validation of Three New Methods for Determination of Metal Emissions Using a Modified Environmental Protection Agency Method 301

Abstract

Three new methods applicable to the determination of hazardous metal concentrations in stationary source emissions were developed and evaluated for use in U.S. Environmental Protection Agency (EPA) compliance applications. Two of the three independent methods, a continuous emissions monitor-based method (Xact) and an X-ray-based filter method (XFM), are used to measure metal emissions. The third method involves a quantitative aerosol generator (QAG), which produces a reference aerosol used to evaluate the measurement methods. A modification of EPA Method 301 was used to validate the three methods for As, Cd, Cr, Pb, and Hg, representing three hazardous waste combustor Maximum Achievable Control Technology (MACT) metal categories (low volatile, semivolatile, and volatile). The modified procedure tested the methods using more stringent criteria than EPA Method 301; these criteria included accuracy, precision, and linearity. The aerosol generation method was evaluated in the laboratory by comparing actual with theoretical aerosol concentrations. The measurement methods were evaluated at a hazardous waste combustor (HWC) by comparing measured with reference aerosol concentrations. The QAG, Xact, and XFM met the modified Method 301 validation criteria. All three of the methods demonstrated precisions and accuracies on the order of 5%. In addition, correlation coefficients for each method were on the order of 0.99, confirming the methods’ linear response and high precision over a wide range of concentrations. The measurement methods should be applicable to emissions from a wide range of sources, and the reference aerosol generator should be applicable to additional analytes. EPA recently approved an alternative monitoring petition for an HWC at Eli Lilly’s Tippecanoe site in Lafayette, IN, in which the Xact is used for demonstrating compliance with the HWC MACT metal emissions (low volatile, semivolatile, and volatile). The QAG reference aerosol generator was approved as a method for providing a quantitative reference aerosol, which is required for certification and continuing quality assurance of the Xact.     

Thermal cracking of oils from waste plastics

Thermal cracking of decomposed waste plastic oil produces a good yield of olefins. The solvent extraction of such waste plastic oil seems to be efficient for increasing gas yields and recycling monomers. To assess the potential of monomer recovery from municipal waste plastics, the oils were cracked using a laboratory-scale quartz-tube reactor. The waste plastic oils were provided by two commercial plants of the Sapporo Plastic Recycle Co. and the Dohoh Recycle Center Co. in Japan. A model waste plastic oil made in a laboratory was also examined. Yields of ethene, propene, and other products were measured at different temperatures. Two-step pyrolysis reduces coking compared with the direct thermal degradation of plastics. The raffinates from waste plastic oils extracted by sulfolane were also cracked. The primary products were almost the same as those from nontreated oils. The maximum total gas yield was 78wt%–85wt% at 750°C, an increase of about 20wt% compared with that of nonextracted oil. Solvent extraction removes stable aromatic hydrocarbons such as styrene, which is more coked than cracked.     

Bioconcentration of butyltin compounds by round crucian carp

Bioconcentration factors (BCF) by round crucian carp and partition coefficients between n‐octanol and water (Pow) were measured for dibutyltin, tributyltin and triphenyltin compounds. Pow was 0.97–3.66 for 7 organotin compounds. BCF of tributyltin and triphenyltin compounds was 1.70–2.77 for muscle, 1.70–2.66 for vertebra, 2.05–3.70 for liver and 1.49–3.50 for kidney.     

Ranking the risks of 12 major environmental pollutants that occur in Japan

The risks posed by 12 major environmental pollutants in Japan were evaluated and ranked on the same scale. These were arsenic, benzene, cadmium, chlordane, chlorpyrifos, DDTs, dioxins, formaldehyde, methylmercury, radon, toluene, and xylenes. Approximately half of these substances are carcinogenic while the other half are non-carcinogenic. We applied a risk estimation framework that can evaluate both cancer and non-cancer risks on the same scale. The framework consists of two parts: the calculation of the probability of adverse health effects, and the evaluation of the severity of the effects. In order to calculate the probability of adverse health effects, individual variabilities in exposure level, metabolizing rate, and sensitivity were taken into account. Loss of life expectancy (LLE; days) was used as a measure of severity of the adverse health effects and of the resulting risk level. The risk level of the substances in terms of LLE ranged from approximately 0.01 to 10 days. The risks from radon and formaldehyde were found to be the highest, while those from DDT and chlordane were the lowest. Our findings also suggested that the risk levels posed by non-carcinogenic substances were comparable to those posed by carcinogenic substances.     

Simulation of dioxin accumulation in human tissues and analysis of reproductive risk

Polychlorinated dibenzo-p-dioxin, polychlorinated dibenzofuran and dioxin-like polychlorinated biphenyl concentrations in human liver, kidney, fat, blood, muscle, richly perfused tissue (brain, lung etc.) and skin were simulated to assess the health risk for Japanese fetuses. A 40-year time course of dioxin accumulation via food ingestion was simulated using a physiologically based pharmacokinetic (PBPK) model. In richly perfused tissue, the concentration estimated by the PBPK model showed better agreement with measured concentrations than that calculated by the one-compartment model. Fetal dioxin concentration was simulated based on the assumption that the fetal concentration was almost equal to the concentration in the mother's richly perfused tissue. To assess the reproductive risk, the estimated concentration in human fetus was compared with that in rat fetus in which reproductive function showed signs of alteration by 2,3,7,8-TCDD in previous reports [Toxicol. Appl. Pharmacol. 114 (1992) 118; 146 (1997) 11; Toxicol. Sci. 53 (2000) 411; 57 (2000) 275]. The present daily intake of 2,3,7,8-TCDD is approximately 1/50 of the amount that leads to possible reproductive toxicity in the next generation. However, when 29 kinds of dioxin congeners are considered, the present level is 1/5 of the hazardous levels. For species extrapolation of dioxin risk, further study on tissue concentration versus toxicity is required.     

Polychlorinated dibenzo-p-dioxins and dibenzofurans in sediment, soil, fish, shellfish and crab samples from Tokyo Bay area, Japan

Concentrations of tetra- to octa-chlorinated dibenzo-p-dioxins and dibenzofurans in samples collected in or near Tokyo Bay, Japan, with a densely inhabited catchment area, were congener-specifically determined and discussed. Analyzed in this study were samples of surface sediment covering the whole bay area, reference soil representing atmospheric impact, and fish, shellfish and crab commonly consumed as food. The range of concentrations were comparable to or higher than those in other parts of Japan. The origins of these compounds in the catchment area of the bay were investigated in terms of homolog and isomeric compositions in the sediment samples. Biota-sediment accumulation factors for benthic species declined as the degree of chlorination increased.     

Bioleaching of metal from municipal waste incineration fly ash using a mixed culture of sulfur-oxidizing and iron-oxidizing bacteria

We investigated the behavior and characteristics of metal leaching from municipal solid waste incineration (MSWI) fly ash among pure cultures of a sulfur-oxidizing bacterium (SOB) and an iron-oxidizing bacterium (IOB) and a mixed culture. The IOB has a high metal-leaching ability, though its tolerability against the ash addition is low. The SOB might better tolerate an increase in ash addition than the IOB, though metal leaching ability of the SOB is limited. Mixed culture could compensate for these deficiencies, and high metal leachability was exhibited in the 1% ash culture, i.e., 67% and 78% of leachabilities for Cu and Zn, respectively, and 100% for Cr and Cd. Furthermore, comparably high leachabilities such as 42% and 78% for Cu and Zn were observed even in the 3% ash cultures. Characterization of metal leaching by the mixed culture revealed that the acidic and oxidizing condition had remained stable thorough the experimental period. Ferric iron remained in the mixed culture, and the metal leaching was enhanced by redox mechanisms coupling with the leaching by sulfate. An increase of ferrous iron enhanced the Cr, Cu, and As leaching. The optimum concentration of sulfur existed for As and Cr (5 gl(-1)) and Cu (2 gl(-1)). The presence of the degradable and non-degradable organic compound that must be existed in the natural environment or waste landfills made no significant change in the leachability of metals other than Zn. These results suggested that bioleaching using a mixed culture of SOB and IOB is a promising technology for recovering the valuable metals from MSWI fly ash.