Recent advances in nanomaterial developments for efficient removal of Hg(II) from water

Environmental Science and Pollution Research - “Water” contamination by mercury Hg(II) has become the biggest concern due to its severe toxicities on public health. There are different...     

Nitrate contamination in water resources,human health risks and its remediation through adsorption: a focused review

The level of nitrate in water has been increasing considerably all around the world due to vast application of inorganic nitrogen fertiliser and animal manure. Because of nitrate’s high solubility in water, human beings are getting exposed to it mainly through various routes including water, food etc. Various regulations have been set for nitrate (45–50 mgNO₃^?/L) in drinking water to protect health of the infants from the methemoglobinemia, birth defects, thyroid disease, risk of specific cancers, i.e. colorectal, breast and bladder cancer caused due to nitrate poisoning. Different methods like ion exchange, adsorption, biological denitrification etc. have the ability to eliminate the nitrate from the aqueous medium. However, adsorption process got preference over the other approaches because of its simple design and satisfactory results especially with surface modified adsorbents or with mineral-based adsorbents. Different types of adsorbents have been used for this purpose; however, adsorbents derived from the biomass wastes have great adsorption capacities for nitrate such as tea waste-based adsorbents (136.43 mg/g), carbon nanotube (142.86 mg/g), chitosan beads (104 mg/g) and cetyltrimethylammonium bromide modified rice husk (278 mg/g). Therefore, a thorough literature survey has been carried out to formulate this review paper to understand various sources of nitrate pollution, route of exposure to the human beings, ill effects along with discussing the key developments as well as the new advancements reported in procuring low-cost efficient adsorbents for water purification.

     

Effects of alcoholic extract of Momordica charantia (Linn.) whole fruit powder on the pancreatic islets of alloxan diabetic albino rats

Alcoholic extract of whole fruit of Momordica charantia was prepared. Adult healthy albino rats were divided into four groups and received a dose of 6 mg/l00 gm. body weight of alloxan monohydrate. Animals of group I served as diabetic control group. The animals of II, III, and IV groups received 25 mg, 50 mg and 75 mg doses of the extract respectively for different durations. 75 mg dose showed increase in body weight. All doses of alcoholic extract of M. charantia were able to decrease the blood sugar level significantly. Extract feeding showed definite improvement in the islets of Langerhans. No toxic effect was observed in the liver The significant features of the study have been blood glucose once lowered by the treatment with M. charantia fruit extract remained static even after discontinuation of drug for 15 days. Blood sugar never fell below normal values even with a high dose, in pancreatic islets, beta cells showed definite improvement.     

Synthesis, characterization and application of Lagerstroemia speciosa embedded magnetic nanoparticle for Cr(VI) adsorption from aqueous solution

Lagerstroemia speciosa bark (LB) embedded magnetic nanoparticles were prepared by co-precipitation of Fe²⁺ and Fe³⁺ salt solution with ammonia and LB for Cr(VI) removal from aqueous solution. The native LB, magnetic nanoparticle (MNP), L. speciosa embedded magnetic nanoparticle (MNPLB) and Cr(VI) adsorbed MNPLB particles were characterized by SEM–EDX, TEM, BET-surface area, FT-IR, XRD and TGA methods. TEM analysis confirmed nearly spherical shape of MNP with an average diameter of 8.76 nm and the surface modification did not result in the phase change of MNP as established by XRD analysis, while led to the formation of secondary particles of MNPLB with diameter of 18.54 nm. Characterization results revealed covalent binding between the hydroxyl group of MNP and carboxyl group of LB particles and further confirmed its physico-chemical nature favorable for Cr(VI) adsorption. The Cr(VI) adsorption on to MNPLB particle as an adsorbent was tested under different contact time, initial Cr(VI) concentration, adsorbent dose, initial pH, temperature and agitation speed. The results of the equilibrium and kinetics of adsorption were well described by Langmuir isotherm and pseudo-second-order model, respectively. The thermodynamic parameters suggest spontaneous and endothermic nature of Cr(VI) adsorption onto MNPLB. The maximum adsorption capacity for MNPLB was calculated to be 434.78 mg/g and these particles even after Cr(VI) adsorption were collected effortlessly from the aqueous solution by a magnet. The desorption of Cr(VI)-adsorbed MNPLB was found to be more than 93.72% with spent MNPLB depicting eleven successive adsorption–desorption cycles.     

Kinetics of degradation of carbendazim by B. subtilis strains: possibility of in situ detoxification

Food safety is a global concern due to the increased use of pesticides in agriculture. In grapes, carbendazim is one of the frequently detected fungicides. However, it is amenable to biodegradation. In this study, we aimed to assess the degradation of carbendazim by four Bacillus subtilis strains, which had earlier shown potential for biocontrol of grape diseases. In liquid medium, each of the four strains, namely, DR-39, CS-126, TL-171, and TS-204, could utilize carbendazim as the sole carbon source. The half-life was minimized from 8.4 days in the uninoculated spiked control to 4.0–6.2 days by the four strains. In Thompson Seedless sprayed with carbendazim at 1.0 g L^?1, the residue on grape berries in control was 0.44 mg kg^?1 after 25 days of application, whereas in grapes treated with the four B. subtilis strains, the residues had decreased to 0.02 mg kg^?1. The degradation kinetics showed low half-lives of 3.1 to 5.2 days in treated grapes as compared to 8.8 days in control. In inoculated soils, the half-lives were 5.9 to 7.6 days in autoclaved and 6.5 to 7.2 days in nonautoclaved soils as compared to 8.2 and 8.0 days in respective controls. The growth dynamics of these strains in all the three matrices was not affected by presence of carbendazim. Bacillus strains TS-204 and TL-171 showed higher degradation rate than the other two strains in all the three matrices and show promise for in situ biodegradation of carbendazim.     

Climate-resilient strategies for sustainable management of water resources and agriculture

Environmental Science and Pollution Research - Warming of the earth is considered as the major adverse effect of climate change along with other abnormalities such as non-availability of water...     

Synthesis of malachite@clay nanocomposite for rapid scavenging of cationic and anionic dyes from synthetic wastewater

Synthesis of malachite@clay nanocomposite was successfully carried out for the removal of cationic (Methylene Blue, MB) and anionic dyes (Congo Red, CR) from synthetic wastewater. Nanocomposite was characterized by TEM, SEM, FT-IR, EDS analysis and zeta potential. TEM analysis indicated that the particle diameter of nanocomposite was in the range of 14 to 23 nm. Various important parameters viz. contact time, concentration of dyes, nanocomposite dosage, temperature and solution pH were optimized to achieve maximum adsorption capacity. In the case of MB, removal decreased from 99.82% to 93.67% while for CR, removal decreased from 88.55% to 75.69% on increasing dye concentration from 100 to 450 mg/L. pH study confirmed the higher removal of CR in acidic range while MB removal was higher in alkaline range. Kinetic study revealed the applicability of pseudo-second-order model for the adsorption of both dyes. Negative values of ΔG⁰ for both systems suggested the feasibility of dye removal and support for spontaneous adsorption of CR and MB on nanocomposite. Nanocomposite showed 277.77 and 238.09 mg/g Langmuir adsorption capacity for MB and CR respectively. Desorption of dyes from the dye loaded nanocomposite was easily carried out with acetone. The results indicate that the prepared malachite@clay nanocomposite is an efficient adsorbent with high adsorption capacity for the aforementioned dyes.     

Sulfide oxidation in fluidized bed bioreactor using nylon support material

A continuous fluidized bed bioreactor (FBBR) with nylon support particles was used to treat synthetic sulfide wastewater at different hydraulic retention time of 25, 50 and 75 min and upflow velocity of 14, 17 and 20 m/hr. The effects of upflow velocity, hydraulic retention time and reactor operation time on sulfide oxidation rate were studied using statistical model. Mixed culture obtained from the activated sludge, taken from tannery effluent treatment plant, was used as a source for microorganisms. The diameter and density of the nylon particles were 2-3 mm and 1140 kg/m³, respectively. Experiments were carried out in the reactor at a temperature of (30 ± 2)℃, at a fixed bed height of 16 cm after the formation of biofilm on the surface of support particles. Biofilm thickness reached (42 ± 3) μupm after 15 days from reactor start-up. The sulfide oxidation, sulfate and sulfur formation is examined at all hydraulic retention times and upflow velocities. The results indicated that almost 90%-92% sulfide oxidation was achieved at all hydraulic retention times. Statistical model could explain 94% of the variability and analysis of variance showed that upflow velocity and hydraulic retention time slightly affected the sulfide oxidation rate. The highest sulfide oxidation of 92% with 70% sulfur was obtained at hydraulic retention time of 75 min and upflow velocity of 14 m/hr.