Distribution patterns of plants explained by human movement behaviour

Distribution patterns of plants are affected by human activities such as creation, destruction or modification of habitats. However, another important question is to what extent humans shape plant distributions by acting as dispersal vectors. In order to answer this question we developed a simulation model for the spread of plant species between human settlements. This was done on the basis of extensive sociological and ecological data on a regional scale. With regard to the sociological data, human movement behaviour defined the amount of exchange between the settlements. Gardening types represented the potential habitat in our model. The ecological data was derived from a vegetation survey carried out in 2003, which was a repeat of a survey between 1974 and 1981 along the same transects. From these surveys, we studied the distributions of 13 species in 67 settlements. In our model, the earlier survey provided the data for the initial distribution. The simulated pattern was consequently compared with the distribution pattern in 2003. In the model, dispersal kernels based on patterns of human movement between settlements led to a better match with the distribution patterns than a null model simulating pure distance dependent dispersal for all species. This was statistically significant for seven of the thirteen species. A striking result was that alien species seem to benefit more from human dispersal than native species. We emphasize the importance of the sociological data on human movement behaviour in parameterizing our regional scale model. This study provides quantitative evidence on the impact of human movement behaviour on the distribution of plant species in suburban areas.     

Influence of heavy metals on the formation and the distribution behavior of PAH and PCDD/F during simulated fires

Combustion experiments were performed with an artificial fire load (polystyrene and quartz powder) in a laboratory scale incinerator in the presence of gaseous HCl to simulate accidental fire conditions. The aim of this investigation was to trace back the alterations of the formation and the distribution behavior of PAH and PCDD/PCDF to the presence of CuO or a mixture of metal oxides (CdO, CuO, Fe(2)O(3), PbO, MoO(3), ZnO). The total amount of the 16 PAH target compounds was reduced by the factor of 5-9 when the mixture of metal oxides was present rather than merely CuO. PAH patterns as well as their distribution behavior were significantly influenced by these oxides. In general, transportation inside the installation was enhanced for most of the 16 analyzed PAH. Only fluorene and dibenzo[a,h]anthracene were transported to a smaller extent. In contrast to PAH, total concentrations of PCDD were increased by factor 9 and of PCDF by factor 10, respectively, when CuO was present. Adding the mixture of metal oxides resulted in an increase of PCDD by factor 14 and of PCDF by factor 7. CuO and the mixture of metal oxides had a different influence on the PCDD/F homologue patterns. For instance, the HxCDF to OCDF ratio after incineration without any metal oxide was 1 to 6, whereas addition of CuO or the mixture of the metal oxides shifted the HxCDF to OCDF ratios towards 1 to 40 or 1 to 17, respectively. Combustion along with CuO increased transportation of higher chlorinated PCDF congeners, whereas the mixture of the metal oxides caused a strong decrease of PCDF distribution throughout the system.     

Chemical composition of burnt smell caused by accidental fires: environmental contaminants

The chemical composition of the odors typical of fires has recently been deciphered. Basically the constituents are mixtures of acetophenone, benzyl alcohol, hydroxylated derivatives of benzaldehyde, methoxylated and/or alkylated phenols and naphthalene. This finding makes it possible to develop objective, practical analytic measurement methods for the burnt smell as a contribution to improving fire damage assessment and remediation monitoring. With the aid of an artificially produced burnt smell and a panel of testers the odor detection threshold of a test mixture was determined olfactometrically to 2 μg m⁻³. Using a defined burnt-smell atmosphere in a test chamber, analytical methods with active sampling, the adsorbents XAD 7 and TENAX TA, and GC/MS measurement were then optimized and tested with a view to being able to carry out sensitive quantitative measurement of burnt smells. A further practical method with particular application to the qualitative characterization of this odor is based on the use of a new SPME (solid-phase microextraction) field sampler with DVB/CAR/PDMS (divinylbenzene/Carboxen™/polydimethylsiloxane) fibers.     

Emission and burnt smell characteristics from combustion experiments with defined materials

Typical burnt smell often results from fire accidents or in general from incomplete combustion. Recently, eleven compounds were identified, which are basically responsible for this odour. When analyzing residual materials from different fire accidents, the pattern that means the relative ratios of these compounds among each other varies strongly, although always causing a burnt smelling. Consequently, lab-scale combustion experiments were performed in order to investigate the influence of defined materials from domestic environment on the burnt-smell fingerprints. Furthermore, the occurrence of other polar and higher molecular combustion products was studied. It was found that under good combustion conditions, the burnt smell patterns resulting from the single materials were astonishingly consistent, mostly dominated by methylphenols or naphthalene. No correlation could be found between these ‘fingerprints’ and combustion product groups identified by GC/MS-screenings. LC/MS/MS-measurements especially pointed at the existence of higher molecular weight phenolic and acidic functionalized compounds in the combustion residues.     

Monitoring of genetically modified Escherichia coli in laboratory wastewater

Containment of genetically modified (GM) microorganisms such as Escherichia coli is a legal requirement to protect the environment from an unintended release and to avoid horizontal gene transfer (HGT) of recombinant DNA to native bacteria. In this study, we sampled the laboratory wastewater (LWW) at a large Swiss university from three sources over 2 years and cultured ampicillin-resistant, presumptive GM E. coli. From a total of 285 samples, 127 contained presumptive GM E. coli (45%) at a mean concentration of 2.8 × 10² CFU/ml. Plasmid DNA of 11 unique clones was partially or entirely sequenced. All consisted of cloning vectors harboring research-specific inserts. To estimate the chance of HGT between GM E. coli and native bacteria in LWW, we identified taxa representative for the bacterial community in LWW using 16S rRNA amplicon sequencing and measured conjugation frequencies of E. coli with five LWW isolates. At optimal conjugation conditions, frequencies were between 3.4 × 10⁻³ and 2.4 × 10⁻⁵. Given the absence of transferable broad-host range plasmids and suboptimal conjugation conditions in the LWW system, we conclude that the chance of HGT is relatively low. Still, this study shows that the implementation of robust containment measures is key to avoid the escape of GM microorganisms.

     

PM2.5, soot and NO2 indoor–outdoor relationships at homes,pre-schools and schools in Stockholm,Sweden

In developed nations people spend about 90% of their time indoors. The relationship between indoor and outdoor air pollution levels is important for the understanding of the health effects of outdoor air pollution. Although other studies describe both the outdoor and indoor atmospheric environment, few excluded a priori major indoor sources, measured the air exchange rate, included more than one micro-environment and included the presence of human activity. PM_2.5, soot, NO₂ and the air exchange rate were measured during winter and summer indoors and outdoors at 18 homes (mostly apartments) of 18 children (6–11-years-old) and also at the six schools and 10 pre-schools that the children attended. The three types of indoor environments were free of environmental tobacco smoke and gas appliances, as the aim was to asses to what extent PM_2.5, soot and NO₂ infiltrate from outdoors to indoors. The median indoor and outdoor PM_2.5 levels were 8.4 μg m^?3 and 9.3 μg m^?3, respectively. The median indoor levels for soot and NO₂ were 0.66 m^?1 × 10^?5 and 10.0 μg m^?3, respectively. The respective outdoor levels were 0.96 m^?1 × 10^?5 and 12.4 μg m^?3. The median indoor/outdoor (I/O) ratios were 0.93, 0.76 and 0.92 for PM_2.5, soot and NO₂, respectively. Their infiltration factors were influenced by the micro-environment, ventilation type and air exchange rate, with aggregated values of 0.25, 0.55 and 0.64, respectively. Indoor and outdoor NO₂ levels were strongly associated (R² = 0.71), followed by soot (R² = 0.50) and PM_2.5 (R² = 0.16). In Stockholm, the three major indoor environments occupied by children offer little protection against combustion-related particles and gases in the outdoor air. Outdoor PM_2.5 seems to infiltrate less, but indoor sources compensate.     

Verbleib von spurenschadstoffen bei der methylesterherstellung aus altspeisefett im technikumsmaßstab

Aims and Scope

In Germany, 120,000 tons per year of waste edible fats are collected from the catering and the food industry Until recently, these fats have widely been used as a nutritional additive for poultry and other animals fodder. Due to the BSE crisis and some affairs based on dioxins in feeding stuff, waste fats are now barely used as fodder. Currently, these fats substitute fresh vegetable oils in the chemical industry and are used as raw material for the production of biodiesel. Therefore, alternative fields of application are required. In this context, the Deutsche Bundesstiftung Umwelt (DBU) is sponsoring a joint research project which deals with the production and testing of cooling lubricants based on monoesters made from waste edible fats.

Methods

In a first step, characteristics and quality of wasteedible fats of different origins were chemically analysed and monitored. The investigations covered the following fat specific parameters: total contamination, sulphate ash, water content, peroxide number, iodine value, kinematical viscosity, neutralisation number (free fatty acids) and fatty acid spectra. In the next step, a process development/optimisation was carried out for the production of methylesters based on the raw material waste fat, leading to the construction of a pilot plant. To investigate the fate of trace pollutants during the production process of waste-fat methylester, samples were systematically contaminated with polycyclic aromatic hydrocarbons, polychlorinated biphenyls, polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and the elements Al, Cd, Cr, Cu, Ni, P, Pb, Sn, and Zn. These contaminated fat samples were transesterified in laboratory scale. The primary and by-products were analysed subsequently.

Results

Valuable hints on the design of the technical process of fatty adid methylester production based on waste edible fats were gained by regarding the fat specific parameters. For example, filtration and dewatering of the waste fats proved necessary. The saturated fatty acids, most wanted for the production of cooling lubricants due to their high oxidation stability, were present in the range of 11,3% to 31,6%. Due to the low content of free fatty acids, a base catalysed process occurred more suitable for the transesterification of the waste edible fats. Trace analytical investigations concerning inorganic and organic pollutants proved a low basic contamination of the waste edible fats. Experiments with systematic contamination of the fats indicated an accumulation of the heavy metals in the glycerol phase during the transesterification process, whereas the organic pollutants were detected in the methylester fraction by amounts of 80% to 95%.

Outlook

In a next step, the further processing of the methylesters to monoesters with alcohols of the chain length C2 to C8 will be presented. Associated results of chemical-analytical investigations on the process and the application of the cooling lubricants will also be given.     

Evaluation of factors influencing soluble microbial product in submerged MBR through hybrid ASM model

In this study, a mathematical model was established to predict the formation of the soluble microbial product (SMP) in a submerged membrane bioreactor. The developed model was calibrated under the reference condition. Simulation results were in good agreement with the measured results under the reference condition. The calibrated model was then used in the scenario studies to evaluate the effect of three chosen operating parameters: hydraulic retention time (HRT), dissolved oxygen concentration, and sludge retention time (SRT). Simulation results revealed that the SMP dominated the soluble organic substances in the supernatant. The scenario studies also revealed that the HRT can be decreased to 1 h without deteriorating the effluent quality; dissolved oxygen concentration in the reactor can be kept at 2–3 mg/L to maintain the effluent quality, reduce the content of SMP, and minimize operating costs; the optimal SRT can be controlled to 10–15 d to achieve complete nitrification process, less membrane fouling potential, and acceptable organic removal efficiency.     

Low emission zones reduce PM10 mass concentrations and diesel soot in German cities

In many European cities mass concentrations of PM₁₀ (particles less than 10 μm in size) are still exceeding air quality standards as set by the European Commission in 1999. As a consequence, many cities introduced low emission zones (LEZs) to improve air quality and to meet the limit values. In Germany currently 48 LEZs are in operation. By means of dispersion modeling, PM₁₀ concentrations were estimated to decrease up to 10%. Analysis of PM₁₀ levels conducted for Cologne, Berlin, and Munich some time after the LEZs were introduced showed reduction of PM₁₀ mass concentration in the estimated range. The PM₁₀ particle fraction is, however, composed of particles with varying toxicity, of which diesel soot is highly health relevant. An evaluation of air quality data conducted in Berlin showed that in 2010 traffic-related soot concentrations measured along major roads decreased by 52% compared to 2007. Diesel particle emissions in Berlin were reduced in 2012 by 63% compared to a business-as-usual scenario (reference year 2007). A strong reduction of the traffic-related particle fraction of PM_2.5 was also reported for Munich. Therefore, it is likely that the effects of LEZs are considerably more significant to human health than was anticipated when only considering the reduction of PM₁₀ mass concentrations.

Implications: The implementation of low emission zones in German cities might result in a reduction of PM₁₀ levels concentrations by up to 10%. However, it is difficult to show a reduction of PM₁₀ annual averages in this order of magnitude as meteorology has a large impact on the year-to-year variation of PM mass concentrations. Monitoring of other PM metrics such as black smoke (BS) or elemental carbon (EC) might be a better strategy for evaluating LEZs effects. The benefit of low emission zones on human health is far greater than is presently visible from routine measurements of PM₁₀.