Destruction of Aspergillus versicolor,Penicillium chrysogenum,Stachybotrys chartarum,and Cladosporium cladosporioides spores using chemical oxidation treatment process

The survival of aqueous suspensions of Penicillium chrysogenum, Stachybotrys chartarum, Aspergillus versicolor, and Cladosporium cladosporioides spores was evaluated using various combinations of hydrogen peroxide and Fe²⁺ as catalyst. Spore concentrations of 10⁶–10⁷ colony forming units per milliliter (CFU/mL) were suspended in water and treated with initial hydrogen peroxide and iron concentrations ranging from 0.05 to 10 percent and 100 to 200 ppm, respectively. After four hours of reaction time, samples were plated on agar plates, and the viable fraction of spores was determined by the number of colonies formed. Hydrogen peroxide concentrations above 50,000 ppm resulted in greater than 6‐log₁₀ reduction of viable spores for both catalyzed and noncatalyzed reactions. Iron had a strong catalytic effect when added to solutions with hydrogen peroxide concentration above 5,000 ppm and resulted in two to three orders of magnitude greater reduction compared to hydrogen peroxide alone. Additional samples taken after 24 hours of reaction time showed that the effect of the addition of 100 and 200 ppm of Fe²⁺ catalyst was mostly kinetic, and noncatalyzed hydrogen peroxide had sporicidal effects similar to catalyzed hydrogen peroxide. This study identified initial reagent concentrations of hydrogen peroxide and Fe²⁺ that accomplish a 6‐log₁₀ reduction of viable mold spores within reaction times of 4 and 24 hours. © 2007 Wiley Periodicals, Inc.     

Trace Element Patterns and Seasonal Variability of Dust Precipitation in a Low Polluted City – The Example of Karlsruhe/Germany

Urban areas of different land uses can be distinguished by their specific patterns of atmospheric dust and trace element precipitation. Dusts emitted from industrial areas with fossil fuel processing, for instance, are enriched in V, Ni and Co. Cluster analysis groups sampling sites based on their specific element patterns. The resulting groups correspond to the surrounding land use: Urban sampling sites were identified showing similar patterns of dust and trace element precipitation as a reference site; dusts of other urban sites were influenced by diffuse pollution (caused by non-point and dispersed pollution sources), or by specific industrial emissions. Cluster analysis was also used to characterize the chemical dust composition. Three clusters of typical element associations were distinguished. These clusters represent the dust matrix, diffuse urban pollution and pollution due to fossil fuel processing. Dust precipitation and chemical dust composition show seasonal variations. Dust precipitation and concentrations of trace elements in the precipitated dust are negatively correlated during the annual courses. The highest concentrations of trace elements occur during winter, whereas the highest precipitations of dust were found during summer. This finding stresses that both, precipitation and concentration have to be addressed for the environmental assessment of urban dusts.     

Sequentielle Schwermetallextraktion aus Staubniederschl?gen und Stra?ensedimenten Teil I: Sequentielle Schwermetallextraktion von Mikroproben

Für die Anwendung der sequentiellen Schwermetallextraktion auf Proben, die nur im Milligramm-Bereich erhalten werden k?nnen (Mikroproben, wie z. B. Staubniederschl?ge), wurde die Methode vonZeien &Brümmer (1989) weiterentwickelt. Der Extraktionsma?stab wurde um den Faktor 1∶100 verringert und die Reproduzierbarkeit des Verfahrens mit variablen Probenmengen um 20mg und einem Extraktionsvolumen von 500 μl mit Hilfe von Standardb?den nachgewiesen. M?gliche Einflüsse variabler Extraktionsverh?ltnisse (Verh?ltnis von Probenmenge zu Extraktionsvolumen) sowie eine aufwendige Vorbehandlung von Staubproben, die nach der Bergerhoff-Methode (VDI 2119/2, 1972) gesammelt wurden, lagen bei diesen Untersuchungen weitgehend im Variationsbereich des Verfahrens. Die sequentielle Extraktion kann folglich zur Untersuchung der Mobilisierbarkeit von Schwermetallen auch aus Mikroproben mit variablen Probenmengen eingesetzt werden. Mit Hilfe dieses Verfahrens wurden die Mobilisierbarkeiten von Zink, Kupfer und Blei der Schluff- und Tonfraktion von Stra?ensedimenten mit Staubniederschl?gen an zwei urbanen Standorten mit unterschiedlicher, verkehrsbedingter Schwermetallbelastung verglichen. Diese Untersuchungen werden in Teil 2 (“Sequentielle Schwermetallextraktion von st?dtischen St?uben”) vorgestellt.     

The zebrafish embryo model in environmental risk assessment—applications beyond acute toxicity testing

BACKGROUND, AIM, AND SCOPE: The use of fish embryos is not regulated by current legislations on animal welfare and is therefore considered as a refinement, if not replacement of animal experiments. Fish embryos represent an attractive model for environmental risk assessment of chemicals since they offer the possibility to perform small-scale, high-throughput analyses. MAIN FEATURES: Beyond their application for determining the acute toxicity, fish embryos are also excellent models for studies aimed at the understanding of toxic mechanisms and the indication of possible adverse and long-term effects. Therefore, we have reviewed the scientific literature in order to indicate alternative applications of the fish embryo model with focus on embryos of the zebrafish. RESULTS AND DISCUSSIONS: The analysis of the mode of action is important for the risk assessment of environmental chemicals and can assist in indicating adverse and long-term effects. Toxicogenomics present a promising approach to unravel the potential mechanisms. Therefore, we present examples of the use of zebrafish embryos to study the effect of chemicals on gene and protein patterns, and the potential implications of differential expression for toxicity. The possible application of other methods, such as kinase arrays or metabolomic profiling, is also highlighted. Furthermore, we show examples of toxicokinetic studies (bioconcentration, ABC transporters) and discuss limitations that might be caused by the potential barrier function of the chorion. Finally, we demonstrate that biomarkers of endocrine disruption, immune modulation, genotoxicity or chronic toxicity could be used as indicators or predictors of sub-acute and long-term effects. CONCLUSIONS: The zebrafish embryo represents a model with an impressive range of possible applications in environmental sciences. Particularly, the adaptation of molecular, system-wide approaches from biomedical research is likely to extend its use in ecotoxicology. RECOMMENDATIONS AND PERSPECTIVES: Challenges for future research are (1) the identification of further suitable molecular markers as indicators of the mode of action, (2) the establishment of strong links between (molecular) effects in short-term assays in embryos and long-term (toxic) effects on individuals, (3) the definition of limitations of the model and (4) the development of tests that can be used for regulatory purposes.     

Molecular cloning and expression of novel metallothionein (MT) gene in the polychaete Perinereis nuntia exposed to metals

To report a novel metallothionein (MT) gene and evaluate its potency as a biomarker, we clone this MT gene and measured the expression levels in the metal-exposed polychaete Perinereis nuntia. Accumulated metal contents and metallothionein-like proteins (MTLPs), which have been recognized as potential biomarkers, were compared with the relative mRNA expressions of the MT gene of P. nuntia (Pn-MT). In addition, the metal-binding affinity was estimated by recombinant Pn-MT protein. Pn-MT having high cysteine residues with three metal response elements in the promoter region closely clusters with those of other invertebrates. The accumulation patterns of metals were dependent on the exposure times in lead (Pb), cadmium (Cd), and copper (Cu) exposure. Particularly, both MTLP levels and relative mRNA expressions of MT were increased with accumulated metal contents and exposure time in P. nuntia exposed to Pb and Cd. There was no significant modulation of the Pn-MT gene in polychaetes exposed to Zn and As. However, the metal-binding ability of the recombinant Pn-MT protein provides a clear evidence for a high affinity of MT to several metal elements. These results suggest that Pn-MT would play an important role in the detoxification and/or sequestration of specific metals (e.g., Pb and Cd) in P. nuntia and have potential as a molecular biomarker in the monitoring of the marine environment using a polychaete.     

Verteilung verkehrsbedingter Edelmetallimmissionen in Böden

Contents and distribution of platinum-group-elements (PGE) in soils caused by automobile emissions were investigated at three transects perpendicular to the road at various depths. Concentrations of platinum, rhodium and palladium were determined by ICP-MS after separation and preconcentration by nickel-sulphide fire-assay. Platinum contents in roadside soils range from 250 μg/kg to the local background values which are below 0.5–0.8 μg/kg. Ratios of platinum and rhodium (about 6∶1) are similar to the ratios in catalytic converters. There is evidence for a significant correlation of PGE input and local parameters such as traffic-conditions, distance from the trafficlane, prevailing wind direction, and barriers such as vegetation or morphology.     

Identifikation der kfz-bürtigen Schadstoffbelastung mit Hilfe der Verh?ltnisse der stabilen Isotope von Kohlenstoff und Schwefel

Zusammenfassung  Reifen-, Ru?-, Motoren?l-, Asphalt-, Plastik- und Lackproben aus dem Stra?enverkehr wurden auf ihre Kohlenstoff- und Schwefel-isotopenverh?ltnisse mit dem Ziel untersucht, die Frage zu beant-worten, ob diese Isotopenverh?ltnisse als Indikatoren für die Belastungssituation und die Schadstoffquellen bei der Untersuchung von stra?ennahen B?den eingesetzt werden k?nnen. Die δ¹¹C-Werte der technischen Substrate lagen zwischen-30‰ und-18‰ relativ zum PDB-Standard, Dabei zeigte sich aufgrund der unterschiedlichen Herstellungsverfahren eine deutliche Abgrenzung der Substrate untereinander. Asphalt hatte Werte zwischen-23 und-18‰, Ru? zwischen -27 und -22‰ Die Ru?proben unterschieden sich je nach Art des verwendeten Kraftstoffs. Plastik, Lack und Motor?le zeigten ?hnliche δ¹³C-Werte, die zwischen-30 und-27‰ lagen. Reifen haben relativ konstante δ¹³C-Werte um -26‰ Der Einflu? des Stra?enverkehrs auf die δ¹³C-Werte im Stra?ensediment und in stra?ennahen B?den konnte anhand verschiedener Kohlenstoffspezies an einem Transekt an einer Landstra?e aufgezeigt werden. Ein Vergleich mit verkehrstypischen Schwermetallemissionen ergab bei einzelnen Kohlenstoffspezies einen ?hnlichen Verlauf der Schwermetallkonzentrationen und der δ¹³C-Werte. Die δ³⁴S-Werte lagen zwischen -6 und +8‰ relativ zum CDT-Standard. Eine Abgrenzung der Substrate in ihren δ¹⁴S-Werten war hierbei nicht m?glich.