Detecting and characterising sources of persistent organic pollutants (PAHs and PCBs) in surface sediments of an industrialized area (harbour of Trieste, northern Adriatic Sea)

A sediment sampling based on a two-dimensional mapping was performed in the harbour of Trieste (northern Adriatic Sea), considering 28 sites exposed to pollutant inputs from harbour and industrial activities. Polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) were determined in surface sediments, because these very persistent pollutants seem to be responsible for the depletion of benthic populations observed in this area. The correlation matrix indicates that PAHs and PCBs are non-correlated, and probably have different sources. Both cluster analysis performed on the sampling sites and graphical drawing of the PAH sediment contents make it possible to locate along the shoreline a band of more polluted sediments, clustered around a site facing a steelmaking factory, to be considered as the main source point for PAHs. The evaluation of phenanthrene to anthracene (P/AN) and fluoranthene to pyrene (FL/PY) ratios permits the assessment of the pyrolytic, industrial origin of these PAHs, rejecting a second possible source of hydrocarbons (i.e., an oil-pipeline terminal, situated near the steelmaking factory). Graphical drawing of the total PCB iso-concentrations reveals a different source-point for this other category of very persistent pollutants.     

Is PM10 mass measurement a reliable index for air quality assessment? An environmental study in a geographical area of north-eastern Italy

The aim of this study was to measure the concentration of some metals (Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Ti) in PM(10) samples collected in one urban and one industrial site and to assess that PM(10) total mass measurement may be not sufficient as air quality index due to its complex composition. Metals were determined by inductively coupled plasma-atomic emission spectroscopy (ICP-AES) and differential pulsed anodic stripping voltammetry (DPASV). The measured concentrations were used to calculate the content of metals in the PM(10) total mass, and to estimate the enrichment factors and the correlations between PM(10), metal concentrations and meteorological data for the two sites. The mean PM10 concentration during the sampling period in the urban site exceeded the annual European Union (EU) standard (40 microg/m(3)) and, for some sampling days, the daily EU standard (50 microg/m(3)) was also exceeded. In opposite, both EU standards were never exceeded in the industrial site. The overall metal content was nearly double in the industrial site compared to the urban one, and the mean Ni concentration exceeded the EU annual limit value (10 ng/m(3)). The metals with the highest enrichment factor were Cd, Cu, Ni and Pb for both sites, suggesting a dominant anthropogenic source for these metals. Metal concentrations were very low and typical of rural background during Christmas holidays, when factories were closed. PM(10) total mass measurement is not a sufficient air quality index since the metal content of PM(10) is not related to its total mass, especially in sites with industrial activities. This measurement should be associated with the analysis of toxic metals.     

Effect of environmental forcing on the fate of nutrients, dissolved organic matter and heavy metals released by a coastal wastewater pipeline

Discharges of nutrients, urea, dissolved organic matter and heavy metals by a sewage underwater pipeline are analysed in comparison to environmental conditions in a shallow coastal zone. Variable thermo-haline stratifications of the water column and currents in upper (2.62-34.97 cm s^-1) and deeper (0.83-10.91 cm s^-1) layers drive vertical diffusion and lateral transport of wastewaters. Loads of reactive phosphorus (0.13 tons d^-1) and ammonium (1.62 tons d^-1) by the pipeline are not negligible compared to the major river loads in the gulf. High concentrations of urea (≤11.51 μmol N dm^-3) were found in the area of wastewater release. Ammonium uptake (6.14-534 nmol N dm^-3 h^-1) strongly exceeded nitrate uptake (0.19-138 nmol N dm^-3 h^-1), indicating that discharges of ammonium by the pipeline are actively assimilated by plankton community even at low levels of light. Distribution of Zn (≤27.7 ppb), Cu (≤25.6 ppb), Cd (≤0.80 ppb) and Pb (≤13.5 ppb) in the water column and the measurement of their complex-forming capacity in seawater did not indicate a persistent perturbation of the pelagic environment due to heavy metals.     

Levels of cadmium and zinc in hepatopancreas of reared Mytilus galloprovincialis from the Gulf of Trieste (Italy)

Cadmium and zinc concentrations were determined in hepatopancreatic tissues of Mytilus galloprovincialis, reared in three non-contaminated hatcheries of the Gulf of Trieste (Northern Adriatic Sea). Mussels were collected in 13 sampling exits with monthly frequency for verifying possible seasonal variations. Freeze dried hepatopancreatic tissues were dissolved by nitric acid procedure using a microwave system; analysis of Zn and Cd followed by AAS technique. Metal concentrations were below the critical values for mollusc soft tissues, but xenobiotic cadmium had values requiring monitoring attention. Cadmium and zinc showed moderate variations along the months, with a slight winter maximum followed by a summer pre-spawning minimum, matching the seasonal trends of temperature/salinity. The estuarine site appears to have the best quality of the examined area in terms of metal contents. The results can constitute a guideline for the water quality in the Northern Adriatic Sea, and permit comparisons with the quality of other areas of the Mediterranean Sea.     

Limestone surfaces in built-up environment as indicators of atmospheric pollution

The concentration of sulphate on limestone surfaces of the external walls of churches in Malta is shown to be related to their position and distance from a power station, the main local point source of sulphur dioxide pollution. Limestone powder collected from these surfaces was examined for the presence of particles which, under low-power optical microscopy, appear as shiny black amorphous bodies which were interpreted as soot particles; the abundance of these bodies was expressed as a black particle count (BPC). The degree of sulphation and BPC were shown to be correlated with each other and both appeared to be strongly dependent on the prevailing wind. The BPC contour map indicated an important contribution to the parameter from vehicular traffic. It is suggested that the degree of sulphation and BPC of limestone surfaces from the built environment should function as environmental indicators of the relative air quality with respect to SO₂ and soot pollution. This data is possibly more accurately representative of the relative long-term air-quality status of different areas of habitation than that deduced from single or episodic measurements of atmospheric pollutant levels.     

Trace metals used as natural markers for discriminating some karstic freshwaters near Trieste (Italy)

Some heavy metals have been determined using voltammetry in freshwaters forming part of a karstic hydrological system (the Timavo River, north of Trieste), during attempts to characterize and discriminate the different sources of the springs. The trace elements can be considered natural markers, with lead appearing to be the most discriminating variable. Non parametric statistics and cluster analysis were used to estimate the significance of the determined parameters with respect to the considered ecosystem.     

An improved index for monitoring metal pollutants in surface sediments

An approach for defining the quality of surface sediments of limited areas in terms of heavy metal contents is proposed. Sediments were taken on a bi‐dimensional mapping, for checking possible different sources of pollution in the case study, a harbour zone. Non residual metals were determined by ICP‐AES in cold diluted hydrochloric acid leachates of sediments. An “enrichment factor”;, r, can be computed for each metal: metals with r values exceeding unity can be considered as indicators of metal pollution. A “total enrichment factor”;, R, was proposed in order to assess the degree of pollution of sediments for each site. R is an adimensional value that accounts for the presence of metals that exceed threshold values determined by background concentrations.     

Trace Metal Voltammetric Determination of Otoliths of Tench Tinca Tinca (L.): Its Possible Uses in Monitoring the Quality of Fresh Waters

New data of heavy metals in otoliths of fresh water teleosts are reported. Differential pulse anodic stripping voltammetry (DPASV) has been used for determining copper, lead, cadmium and zinc in otoliths of tench, Tinca tinca (L.). the analytical procedure followed gives data of good repeatability and with low detection limits, in a simple and inexpensive way. Tench of age ranging from 3 to 8 years were examined. Four year old fish had maximum concentrations of heavy metals, and an otolith weight adequate for experimental determinations in bulked samples. Fresh water teleosts are less mobile than marine ones, and could be used for monitoring the quality of waters suspected for pollution, and eventually verifying the influence of the environmental variations on the metal bioaccumulation.