Evaluation of hydroxyapatite/poly(acrylamide-acrylic acid) for sorptive removal of strontium ions from aqueous solution

Environmental Science and Pollution Research - A composite polymer, hydroxyapatite/poly(acrylamide-acrylic acid), was synthesized by gamma-induced polymerization. The factors affecting the sorption...     

Mass transfer resistance in ASFF reactors for waste water treatment

Analysis of mass transfer resistances was performed for an aerated submerged fixed-film reactor (ASFF) for the treatment of waste water containing a mixture of sucrose and ammonia. Both external and internal mass transfer resistances were considered in the analysis, and characterized as a function of feed flow-rate and concentration. Results show that, over a certain operating regime, external mass transfer resistance in the system was greater for sucrose removal than ammonia. This is because the reaction rates for carbon removal were much larger than those of nitrogen. As a result, existence of any form of mass transfer resistance caused by inadequate mixing or diffusion limitations, strongly affects the overall removal rates of carbon more than nitrogen. Effects of the internal m?ss transfer resistance were virtually non-existent for ammonia removal. This behaviour was found over two orders of magnitude range for the effective diffusivity for ammonia, and one order of magnitude for the film specific surface area. However, over the same parameters' range, it is found that sucrose removal was strongly affected upon lowering its effective diffusivity and increasing the film specific surface area.     

Bio-absorption of Ni and Cd on Eichhornia crassipes root thin film

Release of heavy metals into waterways without treatment can cause a significant threat to the environment. In this paper, we present a method of improving the removal of heavy metals by using Eichhornia crassipes roots (ECR) supported on a polymethyl methacrylate (PMMA) thin film. The functional groups of the synthesized PMMA sample were identified by Fourier transform infrared spectroscopy. ECR roots dried fine powder has a small size and large surface area. They contain many polyfunctional metal-binding sites for both cationic and anionic metal complexes. The results show that using 0.1 g of ECR, about 70 % of Cd present in the water was removed in 4 h; while under the same conditions, about 55 % of Ni was removed. The concentrations of Ni and Cd were measured by laser-induced breakdown spectroscopy, a promising technique for the elemental analysis of heavy metals.     

Broad-band versus narrow-band irradiance for estimating latitude by archival tags

The relative effectiveness of different bands of irradiance to estimate the latitude of archival tags was evaluated. These tags are placed on fishes in order to describe their movements during long distance migrations. Measurements were recorded of broad-band irradiance with and without a cosine collector and narrow-band irradiance of seven narrow bands with 50% attenuation 30 nm on either side of their central wavelength of 400 (violet), 450 (blue), 500 (blue–green), 550 (green), 600 (yellow), 650 (orange), and 700 nm (red). A holographic, cosine collector was used to reduce the vertical transmission of irradiance to the sensor and to increase horizontal transmission of irradiance so the sensor detected more of the diffuse irradiance penetrating the water at dawn and dusk. Daily measurements were made during seven periods of 1–2 days each, beginning 28 June (after 21 June solstice) and ending on 6 October 1999 (after September 23 equinox) of submarine irradiance at 15-s intervals at a fixed depth (10 m) and location (38.31°N; 123.08°W) in Horseshoe Cove, California. Irradiance transmission at this site is intermediate between the clearest offshore waters, where blue irradiance (450 nm) penetrates farther with depth than green irradiance (550 nm) and most oceanic and coastal waters, where green penetrates farther than blue irradiance. Two algorithms were used to estimate latitude, the maximum slope method and the maximum logarithmic difference method. The broad-band, cosine-corrected light, excluding those deployments near the equinox when error is highest, produced an estimate of latitude of 38.30° for both methods and a latitudinal error of ±34.4 km for the former and ±27.2 km for the latter. The mean latitudinal error for non-cosine-collected, broad-band irradiance was ±190.9 km, using the slope algorithm and ±184.8 km using the difference algorithm. The blue band of irradiance, which attenuates least with increasing depth in clear, oceanic water, also produced a comparatively high-latitudinal error of ±163.8 km error for the former algorithm and ±170.4 km for the latter algorithm. Tag designers should consider using cosine-collectors over the irradiance sensors on their archival tags to increase the accuracy of position estimates.     

An assessment of the air pollution data from two monitoring stations in Kuwait

This article assesses the air pollution data from two monitoring stations in Kuwait. The measurements cover major pollutants, i.e., CO, CO₂, methanated and non-methanated hydrocarbons, NO _x , SO₂, O₃, and particulate matter (PM10). The data also includes meteorological parameters, i.e., solar intensity, temperature, wind speed, and wind direction, and has been collected over a period 4 years, from 2001 to 2004. Data analysis includes the assessment of annual hourly averages and 1-h maxima. Typical pollutant concentration trends, similar to those previously reported for Kuwait and for other locations around the world, are observed except for particulate matter measurements, which have higher values because of proximity to the desert. Emissions of nitrogen oxides show a consistent increase over the years. This is caused by the increase in the number of motor vehicles and the expansion in power generation and industrial activities. The data collected is a subset of the air quality criteria, as defined by the US EPA (United States Environmental Protection Agency).     

TiO2 nanoparticles potentiated the cytotoxicity,oxidative stress and apoptosis response of cadmium in two different human cells

Environmental Science and Pollution Research - Widespread application of titanium dioxide nanoparticles (nTiO2) and ubiquitous cadmium (Cd) pollution may increase their chance of co-existence in...     

Chemical industry wastewater treatment

Treatment of chemical industrial wastewater from building and construction chemicals factory and plastic shoes manufacturing factory was investigated. The two factories discharge their wastewater into the public sewerage network. The results showed the wastewater discharged from the building and construction chemicals factory was highly contaminated with organic compounds. The average values of chemical oxygen demand (COD) and biochemical oxygen demand (BOD) were 2912 and 150 mgO₂/l. Phenol concentration up to 0.3 mg/l was detected. Chemical treatment using lime aided with ferric chloride proved to be effective and produced an effluent characteristics in compliance with Egyptian permissible limits. With respect to the other factory, industrial wastewater was mixed with domestic wastewater in order to lower the organic load. The COD, BOD values after mixing reached 5239 and 2615 mgO₂/l. The average concentration of phenol was 0.5 mg/l. Biological treatment using activated sludge or rotating biological contactor (RBC) proved to be an effective treatment system in terms of producing an effluent characteristic within the permissible limits set by the law. Therefore, the characteristics of chemical industrial wastewater determine which treatment system to utilize. Based on laboratory results engineering design of each treatment system was developed and cost estimate prepared.     

Predicting ozone levels

This paper presents a statistical model that is capable of predicting ozone levels from precursor concentrations and meteorological conditions during daylight hours in the Shuaiba Industrial Area (SIA) of Kuwait. The model has been developed from ambient air quality data that was recorded for one year starting from December 1994 using an air pollution mobile monitoring station. The functional relationship between ozone level and the various independent variables has been determined by using a stepwise multiple regression modelling procedure. The model contains two terms that describe the dependence of ozone on nitrogen oxides (NOx) and nonmethane hydrocarbon precursor concentrations, and other terms that relate to wind direction, wind speed, sulphur dioxide (SO₂) and solar energy. In the model, the levels of the precursors are inversely related to ozone concentration, whereas SO₂ concentration, wind speed and solar radiation are positively correlated. Typically, 63 % of the variation in ozone levels can be explained by the levels of NOx. The model is shown to be statistically significant and model predictions and experimental observations are shown to be consistent. A detailed analysis of the ozone-temperature relationship is also presented; at temperatures less than 27 °C there is a positive correlation between temperature and ozone concentration whereas at temperatures greater than 27 °C a negative correlation is seen. This is the first time a non-monotonic relationship between ozone levels and temperature has been reported and discussed.     

A cognitive approach to the post-Soviet Central Asian pasture puzzle: new data from Kyrgyzstan

Regional Environmental Change - Despite internationally recognized definitions, there remains debate over what constitutes ‘actual’ degradation in various agro-pastoral contexts. This...