Development of an analytical method for analysis of flubendiamide,des-iodo flubendiamide and study of their residue persistence in tomato and soil

Flubendiamide is a new insecticide that has been found to give excellent control of lepidopterous pests of tomato. This study has been undertaken to develop an improved method for analysis of flubendiamide and its metabolite des-iodo flubendiamide and determine residue retention in tomato and soil. The analytical method developed involved extraction of flubendiamide and its metabolite des-iodo flubendiamide with acetonitrile, liquid-liquid partitioning into hexane-ethyl acetate mixture (6:4, v v^?1) and cleanup with activated neutral alumina. Finally the residues were dissolved in gradient high pressure liquid chromatography (HPLC) grade acetonitrile for analysis by HPLC. The mobile phase, acetonitrile-water at 60:40 (v v^?1) proportion and the wavelength of 235 nm gave maximum peak resolution. Using the above method and HPLC parameters described, nearly 100 % recovery of both insecticides were obtained. There was no matrix interference and the limit of quantification (LOQ) of the method was 0.01 mg kg^?1. Initial residue deposits of flubendiamide on field-treated tomato from treatments @ 48 and 96 g active ingredient hectare^?1 were 0.83 and 1.68 mg kg^?1,respectively. The residues of flubendiamide dissipated at the half-life of 3.9 and 4.4 days from treatments @ 48 and 96 g a.i. ha^?1, respectively and persisted for 15 days from both the treatments. Des-iodo flubendiamide was not detected in tomato fruits at any time during the study period. Residues of flubendiamide and des-iodo flubendiamide in soil from treatment @ 48 and 96 g a.i. ha^?1 were below detectable level (BDL, < 0.01 mg kg^?1) after 20 days. Flubendiamide completely dissipated from tomato within 20 days when the 480 SC formulation was applied at doses recommended for protection against lepidopterous pests.     

Removal of dye using peroxidase-immobilized Buckypaper/polyvinyl alcohol membrane in a multi-stage filtration column via RSM and ANFIS

Environmental Science and Pollution Research - The feasibility and performance of Jicama peroxidase (JP) immobilized Buckypaper/polyvinyl alcohol (BP/PVA) membrane for methylene blue (MB) dye...     

Assessment of potential health risk of fluoride consumption through rice,pulses, and vegetables in addition to consumption of fluoride-contaminated drinking water of West Bengal,India

A study was conducted in fluoride-affected Bankura and Purulia districts of West Bengal to assess the potential health risk from fluoride exposure among children, teenagers, and adults due to consumption of rice, pulses, and vegetables in addition to drinking water and incidental ingestion of soil by children. Higher mean fluoride contents (13–63 mg/kg dry weight) were observed in radish, carrot, onion bulb, brinjal, potato tuber, cauliflower, cabbage, coriander, and pigeon pea. The combined influence of rice, pulses, and vegetables to cumulative estimated daily intake (EDI) of fluoride for the studied population was found to be 9.5–16%. Results also showed that intake of ivy gourd, broad beans, rice, turnip, fenugreek leaves, mustard, spinach, and amaranth grown in the study area is safe at least for time being. The cumulative EDI values of fluoride (0.06–0.19 mg/kg-day) among different age group of people of the study area were evaluated to be ~10⁴ times higher than those living in the control area; the values for children (0.19 and 0.52 mg/kg-day for CTE and RME scenarios, respectively) were also greater than the “Tolerable Upper Intake Level” value of fluoride. The estimated hazard index (HI) for children (3.2 and 8.7 for CTE and RME scenarios, respectively) living in the two affected districts reveals that they are at high risk of developing dental fluorosis due to the consumption of fluoride-contaminated rice, pulses, and vegetables grown in the study area in addition to the consumption of contaminated drinking water.     

Survey on nutrient content of different organic fertilisers

The knowledge of nutrient aspects of organic fertilisers is of much relevance in assessing their availability and long-term effect to the soil and crop and in formulating sound fertiliser recommendation. Around 619 organic fertiliser samples under different categories, which were received by the analytical laboratory of UPASI Tea Research Institute, Valparai, were examined for their nutrient status. The trend in the number of samples received every year for the past 5 years showed that there is a gradual, steady and linear increase in the number of samples received by the laboratory which, in turn, authenticates the increase in the production and utilisation of organic fertilisers in agricultural sector. This also reveals the awareness of organic farming among farmers in recent times. The organic fertilisers received by the laboratory were categorised into different groups based on their nomenclature. The number of samples received each year under different categories varies to a larger extent. The nutritional status was unpredictable based on the nomenclature of the sample received. In addition to this frequency distribution, the nutritional values analysed are discussed in this paper. Correlation matrix was worked out between all the parameters estimated. It is evident that if maintenance of proper carbon-to-nitrogen ratio and moisture content is ascertained in the finished product, one can guarantee the quality of the organic fertiliser in terms of nutrient content.     

Variations in phytoplankton community in a monsoon-influenced tropical estuary

In a monsoon-affected tropical estuary, oscillations in freshwater discharge during monsoon shifted the phytoplankton blooms from those adapted to low salinities to high salinities and vice versa. Salinity stratification during monsoon (onset and restart after an intermittent break) favored diatom (Skeletonema) bloom in low-saline surface waters. In high-saline, nutrient-rich bottom waters, Fragilariopsis (diatom) bloom was observed during onset of monsoon and persisted till the end of monsoon. The break period in monsoon altered the phytoplankton community leading to mixed species bloom of large-sized diatoms and harmful dinoflagellates (Gymnodinium catenatum and Cochlodinium polykrikoides) under high-saline, nutrient-poor, non-stratified, and transparent water column. Such variations in community should be considered for better understanding the biogeochemistry of monsoon-influenced tropical estuaries. The dominance of Skeletonema is determined positively by the extent of low-saline stratified condition whereas most of the observed taxa were favored by high-saline, nutrient-poor, and transparent waters.     

Perceived Collective Efficacy and Trust in Government Influence Public Engagement with Climate Change-Related Water Conservation Policies

Water insecurity, induced or intensified due to climate change, has emerged as a key policy challenge in poor and developing countries such as India. Drawing on social cognitive theory, this paper examines the role of perceived collective efficacy—people's shared beliefs about their group's capabilities to accomplish collective tasks—and trust in government as factors influencing Indians' engagement with government water conservation policies. Using a national survey of Indians (N = 4031), we found that individuals with high levels of perceived collective efficacy and trust in government are more likely to support government water conservation policies. Moreover, for individuals with low trust in government, higher collective efficacy is associated with greater policy support. Perceived collective efficacy is also associated with activist behaviours, while distrust is not. Increasing collective efficacy beliefs, for example through mass media channels and targeted campaigns, could help increase citizens' engagement with climate change adaptation policies.     

Moisture Sorption Characteristics of Chitosan/Polyethylene Oxide Blended Films

Studies on the moisture sorption characteristics of chitosan/polyethylene oxide (PEO) blended films have been carried out at 27 °C for water activity (a _w) from 0.1 to 0.9. The sorption data at different a _w were used to fit 12 different sorption isotherm models proposed in the literature. The model constants were determined by linear fitting of the sorption equations. The ranges of applicability of water activity for the isotherms reported in the article lie between 0.11 to 0.44 (monomolecular layer) for the BET model and between 0.11 to 0.86 (monolayer & multilayer’s) for Smith, Caurie, Bradley and Oswin. The water activity for Halsey and Chung & Pfost models lies between 0.44 to 0.86 (multilayer) and 0.33 to 0.86 for Henderson and Freundlich models and 0.11 to 0.65 for Kuhn, Linear and Iglesias & Chirife models. The high coefficient of determination R ² (ranges from 0.82 to 1) confirms the applicability of the equations employed. The study on the application of such water activity data of chitosan/PEO blended films on different model equations will be helpful in prediction of durability and functional behavior of moisture sensitive biopolymeric films     

Development of an analytical method for analysis of flubendiamide, des-iodo flubendiamide and study of their residue persistence in tomato and soil

Flubendiamide is a new insecticide that has been found to give excellent control of lepidopterous pests of tomato. This study has been undertaken to develop an improved method for analysis of flubendiamide and its metabolite des-iodo flubendiamide and determine residue retention in tomato and soil. The analytical method developed involved extraction of flubendiamide and its metabolite des-iodo flubendiamide with acetonitrile, liquid-liquid partitioning into hexane-ethyl acetate mixture (6:4, v v?1) and cleanup with activated neutral alumina. Finally the residues were dissolved in gradient high pressure liquid chromatography (HPLC) grade acetonitrile for analysis by HPLC. The mobile phase, acetonitrile-water at 60:40 (v v?1) proportion and the wavelength of 235 nm gave maximum peak resolution. Using the above method and HPLC parameters described, nearly 100 % recovery of both insecticides were obtained. There was no matrix interference and the limit of quantification (LOQ) of the method was 0.01 mg kg?1. Initial residue deposits of flubendiamide on field-treated tomato from treatments @ 48 and 96 g active ingredient hectare?1 were 0.83 and 1.68 mg kg?1, respectively. The residues of flubendiamide dissipated at the half-life of 3.9 and 4.4 days from treatments @ 48 and 96 g a.i. ha?1, respectively and persisted for 15 days from both the treatments. Des-iodo flubendiamide was not detected in tomato fruits at any time during the study period. Residues of flubendiamide and des-iodo flubendiamide in soil from treatment @ 48 and 96 g a.i. ha?1 were below detectable level (BDL, < 0.01 mg kg?1) after 20 days. Flubendiamide completely dissipated from tomato within 20 days when the 480 SC formulation was applied at doses recommended for protection against lepidopterous pests.     

Process control factors for continuous microbial perchlorate reduction in the presence of zero-valent iron

Process control parameters influencing microbial perchlorate reduction via a flow-through zero-valent iron （ZVI） column reactor were investigated in order to optimize perchlorate removal from water. Mixed perchlorate reducers were obtained from a wastewater treatment plant and inoculated into the reactor without further acclimation. Examined parameters included hydraulic residence time （HRT）, pH, nutrients requirement, and perchlorate reduction kinetics. The minimum HRT for the system was concluded to be 8 hr. The removal efficiency of 10 mg. L-1 influent perchlorate concentration was reduced by 20%-80% without control to the neutral pH （HRT = 8 hr）. Therefore pH was determined to be an important parameter for microbial perchlorate reduction. Furthermore, a viable alternative to pH buffer was discussed. The microbial perchlorate reduction followed the first order kinetics, with a rate constant （K） of 0.761 hr-1. The results from this study will contribute to the implementation of a safe, cost effective, and efficient system for perchlorate reduction to below regulated levels.     

Media Use and Public Perceptions of Global Warming in India

Media plays a vital role in informing the public about environmental threats. Although climate change is a global problem, developing countries such as India are often more vulnerable to the impacts due to poverty, illiteracy, and low public awareness. Using data from a nationally representative survey in India, this paper explores the relationships between media use, issue attention, and trust in informational sources on one hand and science-based climate change beliefs, risk perceptions, and policy support on the other. Results suggest that the Indian media, through consistent and accurate coverage of global warming using trusted sources, can play a positive role in increasing public engagement among a largely unaware population. Implications for climate change communication in India are discussed.