金属改性对SAPO-34低温还原NO性能的影响

采用浸渍法制备金属改性SAPO-34分子筛催化剂,分析比较了不同单金属（Cu或Co）及不同比例双金属（Cu：Co=1：1、3：1、5：1,质量比）改性催化剂对NO的催化还原性能,评价了不同催化剂的N₂选择性,并采用扫描电子显微镜（SEM）、比表面积测试、X射线衍射分析（XRD）、NH₃-程序升温脱附（NH₃-TPD）等表征手段对催化剂的物化性能进行了分析.结果表明,单金属Cu改性催化剂具有较宽的温度区间,在250~450℃范围内NO的转化率始终保持在100%;双金属改性使NO转化率保持为100%的最低温度下降了25~50℃,显著拓宽了低温段窗口,其中,Cu₃Co₁/SAPO-34催化剂的低温催化还原性能最好,200℃即可实现100%的NO转化率,175℃下的转化率也高达80%以上.Cu-Co双金属改性SAPO-34分子筛催化剂具有优异的低温催化还原NO性能,具有在机动车尾气、工业废气的低温脱硝治理领域应用的潜力.     

薄壁直缝焊管辊式成形的研制与应用

介绍了直缝薄壁焊管辊式成形的机理,并对其进行理论分析。用综合弯曲法成功地对成形辊进行改造设计,并取得较好效果。     

聚丙烯塑料-锯末干混合制备高介孔率柱状活性炭

以聚丙烯塑料和梧桐锯末为原材料,无水K2CO3为活化剂,采用干混合法制备高介孔率柱状活性炭.通过单因素实验,探究了塑料含量、盐料比、活化温度及活化时间对活性炭吸附亚甲基蓝(MB)性能的影响.结果表明:当塑料含量为20%、盐料比为2.5、活化温度为950℃、活化时间为80 min时,所制备的活性炭具有较高的MB吸附量(322.9 mg·g-1).所制备的活性炭具有发达的微观孔隙结构,其比表面积达到1461.99m2·g-1,平均孔径为3.23 nm,总孔容为1.04 cm3·g-1,其中,介孔孔容为0.80 cm3·g-1,介孔率超过70%,充分说明该方法可制备优质高介孔率柱状活性炭.     

Novel synthetic approaches and TWC catalytic performance of flower-like Pt/CeO2

A novel Ultrasonic Assisted Membrane Reduction （UAMR）-hydrothermal method was used to prepare flower-like Pt/CeO2 catalysts. The texture, physical/chemical properties, and reducibility of the flower-like Pt/CeO2 catalysts were characterized by X-Ray Diffraction （XRD）, Scanning Electron Microscope （SEM）, Transmission Electron Microscope （TEM）, N2 adsorption, and hydrogen temperature programmed reduction （HE-TPR） techniques. The catalytic performance of the catalysts for treating automobile emission was studied relative to samples prepared by the conventional wetness impregnation method. The Pt/CeO2 catalysts fabricated by this novel method showed high specific surface area and metal dispersion, excellent three-way catalytic activity, and good thermal stability. The strong interaction between the Pt nanoparticles and CeO2 improved the thermal stability. The Ce4＋ ions were incorporated into the surfactant chains and the Pt nanoparticles were stabilized through an exchange reaction of the surface hydroxyl groups. The SEM results demonstrated that the Pt/CeO2 catalysts had a typical three-dimensional （3D） hierarchical porous struc- ture, which was favorable for surface reaction and enhanced the exposure degree of the Pt nanoparticles. In brief, the flower-like Pt/CeO2 catalysts prepared by UAMR-hydrothermal method exhibited a higher Pt metal dispersion, smaller particle size, better three-way catalytic activity, and improved thermal stability versus conven- tional materials.     

压裂返排液循环使用技术综述

综述了传统处理方法和深度处理方法两大类压裂返排液处理方法的特点和处理效率。介绍了对氧化破胶的压裂返排液和非氧化破胶的压裂返排液进行处理的方法和机理,以及返排液循环使用效果和性能检测的标准。指出研发含有高分子聚合物稠化剂的返排液循环使用工艺、高效便捷的压裂返排液循环使用工艺和新型可循环使用的压裂液体系等将是未来压裂返排液循环使用的发展方向。     

Effects of synthesis methods on the performance of Pt + Rh/Ce0.6Zr0.4O2 three-way catalysts

The 0.7 wt% Pt + 0.3 wt% Rh/Ce0.6Zr0.4O2 catalysts were fabricated via different methods, including ultrasonic-assisted membrane reduction(UAMR) co-precipitation, UAMR separation precipitation, co-impregnation, and sequential impregnation. The catalysts were physico-chemically characterized by N2 adsorption, XRD, TEM, and H2-TPR techniques, and evaluated for three-way catalytic activities with simulated automobile exhaust. UAMR co-precipitation- and UAMR separation precipitationprepared catalysts exhibited a high surface area and metal dispersion, wide λ window and excellent conversion for NOx reduction under lean conditions. Both fresh and aged catalysts from UAMRprecipitation showed the high surface areas of ca. 60–67 m2/g and 18–22 m2/g, respectively, high metal dispersion of 41%–55%, and small active particle diameters of 2.1–2.7 nm. When these catalysts were aged, the catalysts prepared by the UAMR method exhibited a wider working window(Δλ = 0.284–0.287) than impregnated ones(Δλ = 0.065–0.115) as well as excellent three-way catalytic performance, and showed lower T50(169.C) and T90(195.C) for NO reduction than the aged catalysts from impregnation processes, which were at 265 and 309.C, respectively. This implied that the UAMR-separation precipitation has important potential for industrial applications to improve catalytic performance and thermal stability. The fresh and aged 0.7 wt% Pt + 0.3 wt% Rh/Ce0:6Zr0:4O2 catalysts prepared by the UAMR-separation precipitation method exhibited better catalytic performance than the corresponding catalysts prepared by conventional impregnation routes.     

The Buffer Capacity of Calcareous Soils in Gansu Province of China

In this study, we added increments of acid and base to three calcareous soils from the eastern, middle and western parts of Gansu Province (China) and to three treated soils to remove calcium carbonate, organic matter and both carbonate and organic matter, respectively. the titration curves were measured and the magnitudes of buffer capacities as a function of pH were computed. It was found that the buffer capacity of calcareous soil is mainly attributed to calcium carbonate, as expected from the chemical composition of calcareous soil, while cation exchange system, silicate buffer system and organic matter play a minor role. the results clearly show that these soils of Gansu Province will not become a problem in the near future from the entrance of H⁺ into these soils.     

Concentrations of PCDD/PCDFs and PCBs in retail foods and an assessment of dietary intake for local population of Shenzhen in China

OBJECTIVES: Concentrations of 17 polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and 18 polychlorinated biphenyls (PCBs) were measured in 11 varieties of food groups collected from retail market of Shenzhen, Guangdong province, China from 2004 to 2006. PCDD/Fs and PCBs dietary intake from varies food for the local population was estimated in the study. METHODS: Concentrations of 17 polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and 12 dioxin-like polychlorinated biphenyls (PCBs) as well as 6 marker PCBs were measured in 11 varieties of food groups in total 110 food samples by isotope dilution HRGC/HRMS. PCDD/Fs and PCBs dietary intake for local population was estimated using total WHO-TEQ concentration and different food consumption amount of the local population. RESULTS: The median WHO-TEQ concentrations of sum of PCDD/Fs and DL-PCBs varied from 0.0093 pg/g (parts per trillion) in vegetable to 9.89 pg/g in fish. Fish was followed by egg 2.46, chicken 1.73, beef 0.94, mutton 0.82, duck 0.39, pork 0.37, milk powder 0.25, vegetable oil 0.076, cereals 0.022 pg/g and vegetable. The monthly intake of PCDD/Fs and PCBs were 40.9 pg WHO-TEQ/kg b.w. for local population. Sum of fish, livestock, and poultry contributed 77% to the Estimated Monthly Intake (EMI) in local population. CONCLUSION: Estimated dietary intake of PCDD/Fs and DL-PCBs for local population was below the provisional tolerable monthly intake(PTMI) set by Joint FAO/WHO Expert Committee on Food Additives (JECFA).     

Historical changes in the major and trace elements in the sedimentary records of Lake Qinghai,Qinghai–Tibet Plateau: implications for anthropogenic activities

Environmental Geochemistry and Health - Sediment sequences in Lake Qinghai spanning the past 100 years were explored to assess the effects of changes in local land desertification, dust...     

丝状菌对好氧颗粒污泥形成的影响

通过在SBR中分别接种85%的絮状活性污泥和15%的丝状菌,采用以葡萄糖为碳源配制的人工模拟进水,研究丝状菌对好氧颗粒污泥形成的影响。结果在15 d内培养出理化性能良好的好氧颗粒污泥,表明丝状菌能够加快好氧颗粒污泥的形成。反应器运行期间,COD、NH4+-N、总氮和总磷的平均去除率分别为80.0%、86.9%、70.0%和42.5%,且出水水质稳定,表明好氧颗粒污泥具有良好的除污效果。