Simplified determination of lipophilic metabolites of nonylphenol ethoxylates: method development and application in aqueous samples from Buenos Aires, Argentina

In the present work we have developed an analytical methodology for the determination of nonylphenol (NP) and nonylphenol mono- and di-ethoxylates (NP1EO and NP2EO) in water samples. The applicability of this methodology was proved by means of the analysis of environmentally relevant aqueous samples from Buenos Aires. This constitutes a starting point for a rigorous assessment of the incidence of NPnEO surfactants in Argentina, as only very few, qualitative or semi-quantitative data on the occurrence of these compounds in local systems were available up to this time. Enrichment of the analytes was carried out by solid-phase extraction on a C-18 sorbent, followed by elution with ethyl acetate. Normal-phase high performance liquid chromatography on an amino-silica column and fluorescence detection at excitation-emission wavelengths of 230-300 nm were employed for separation and quantification of the analytes. Confirmation of peak assignment in selected real samples was performed by off-line coupling HPLC with GC-MS analysis. A non-polar GC capillary column was used, and a characteristic peak pattern was obtained for the alkyl chain isomers of each ethoxylated homologue and NP. GC-MS analyses yielded in all cases purity levels higher than 80% for the HPLC collected fractions. The elevated concentrations found for the estrogenic metabolites of NPnEO are in accordance with an unrestricted use of this class of non-ionic surfactants in the country.     

Synthesis of poly(hydroxyalkanoate) from hydrolyzed linseed oil

Pseudomonas putida was grown on a mixture of long-chain fatty acids obtained by hydrolysis of linseed oil. A poly(3-hydroxyalkanoate) containing 51.2% of unsaturated monomers was obtained. A considerable percentage (13.6%) was constituted by C₁₄ and C₁₆ monomers containing three double-bonds in the side chains. The polymer showed a high tendency to crosslink when it was kept in presence of air. In the crosslinked polymer no polyunsaturated monomers could be detected.     

Effect of Si-rich substances on phosphorous adsorption by sandy soils

Environmental Science and Pollution Research - The poor adsorption capacity of sandy soils is one of the primary reasons of a high level of phosphorus (P) leaching. Silicon (Si)-rich soil...     

Selective collection as a pretreatment for indirect solid recovered fuel generation

Effective selective collection (SC) has been increasing in many countries of the European Union. As a consequence the composition of residual municipal solid waste (RMSW) is changing not only because of economic development, but also due to the collection system. The input of RMSW treatment plants is thus not homogeneous. This paper analyses two case studies involving a total of five SC scenarios and their impact on the generation of solid recovered fuel (SRF) with/without bio-drying, post-treatment and packaging take back programs (TBPs). These case studies are based on two types of SC: kerbside and drop-off. The latest regulation on SRF classification is taken into account: energy content, Cl and Hg concentrations are assessed and discussed. The role of the respirometric index (RI) is also analyzed. Results show that when SC is highly efficient RMSW can be classified directly as SRF, but only if the introduction of RI does not set stringent respirometric targets. The role of packaging TBPs is important as the residual waste remaining after the packaging has been processed, can be valorized increasing the lower heating value (LHV) of the residual RMSW and minimizing the streams that should be landfilled. The source separation of food waste has a significant impact on the suitability of bio-drying: when the SC of food waste is very efficient, its percentage in the RMSW may be too low for effective bio-drying.     

Bacterial toxicity testing and antibacterial activity of parabens

Parabens are used because of their antimicrobial effects, yet they have multiple adverse effects. The aim of this work was to evaluate the bactericidal activity and bacterial toxicity of the most common parabens: methylparaben, ethylparaben, propylparaben, isopropylparaben, butylparaben, isobutylparaben and phenylparaben. The bactericidal action was evaluated by means of the dilution-neutralization method against Escherichia coli and Staphylococcus aureus, and the biotest of inhibition of growth of E. coli was applied for the bacterial toxicity assay. Bactericidal concentrations were reached only for propylparaben, butylparaben and isobutylparaben. The toxicity study showed methylparaben to be the least toxic, whereas the most toxic one was phenylparaben. It can be concluded that the disinfectant activity of the parabens studied is insignificant against S. aureus and E. coli. Acute toxicity is very low, and the inhibitory effect is weak. Our results provide information about the risk–benefit balance of parabens use.     

Assessment of long-term wastewater irrigation impacts on the soil geochemical properties and the bioaccumulation of heavy metals to the agricultural products

An extensive field survey was employed for assessing the impacts of long-term wastewater irrigation of forage crops and orange orchards in three suburban agricultural areas in Cyprus (areas I, II, and III), as compared to rainfed agriculture, on the soil geochemical properties and the bioaccumulation of heavy metals (Zn, Ni, Mn, Cu, Co) to the agricultural products. Both ryegrass fields and orange orchards in areas I and II were continuously wastewater irrigated for 10 years, whereas clover fields in area III for 0.5, 4, and 8 years. The results revealed that wastewater reuse for irrigation caused a slight increase in soil salinity and Cl^? content in areas I and II, and a remarkable increase, having strong correlation with the period in which wastewater irrigation was practiced, in area III. Soil salinization in area III was due to the high electrical conductivity (EC) of the wastewater applied for irrigation, attributed to the influx of seawater to the sewage collection network in area III. In addition, the wastewater irrigation practice resulted in a slight decrease of the soil pH values in area III, while a subtle impact was identified regarding the CaCO₃, Fe, and heavy metal content in the three areas surveyed. The heavy metal content quantified in the forage plants’ above-ground parts was below the critical levels of phytotoxicity and the maximum acceptable concentration in dairy feed, whereas heavy metals quantified in orange fruit pulp were below the maximum permissible levels (MPLs). Heavy metal phytoavailability was confined due to soil properties (high pH and clay content), as evidenced by the calculated low transfer factor (TF).     

Epiphyte toxicity bioassay for ecotoxicological and coastal monitoring

Marine epibionts are organisms that grow on submerged surfaces. Those found on seagrass leaves are especially important because of their interactions with the plants, their contribution to primary production in these ecosystems, and their role as food source for heterotrophic fauna. Given the relative lack of ecotoxicological studies on epibionts, the aim of this study is to evaluate the effect of environmental pollution on epiphytes experimentally attached to artificial devices (mimes) consisting of thermally-sealed silicone tubes supported on bamboo sticks that mimic the morphology of seagrasses and serve as an anchor surface for marine epibionts. Mimes were installed on the sea floor in subtidal waters of the Rio San Pedro (Cádiz), collected after 28 days, and incubated in the laboratory with environmental concentrations of atrazine (herbicide), Irgarol (anti-fouling substance), and copper. Tube-dwelling diatoms formed the major component of the epiphyte community. Average surface covering, chlorophyll, and biomass content did not show significant differences between controls and treatments. The glutathione peroxidase activity increased significantly with 4 μg L^?1 of atrazine and 5 μg L^?1 of copper. This enzymatic activity increase seems to be sufficient to prevent oxidative cellular damage by removing reactive oxygen substances produced by oxidative stress; in addition to this enzyme, there might be other antioxidant enzymes which have not been measured in this study, that have also protected the organism from oxidative damage. Thus, the measurement of antioxidant enzymatic activity in epiphytes may be a useful toxicity indicator for coastal biomonitoring.     

At home and abroad: An empirical analysis of innovation and diffusion in energy technologies

This paper contributes to the induced innovation literature by extending the analysis of supply and demand determinants of innovation in energy technologies to account for international knowledge flows and spillovers. We select a sample of 38 innovating countries and study how knowledge related to energy-efficient and environmentally friendly technologies flows across geographical and technological space. We demonstrate that higher geographical and technological distances are associated with lower probabilities of knowledge flow. Next, we use previous estimates to construct internal and external knowledge stocks for a panel of 17 countries. We then present an econometric analysis of the supply and demand determinants of innovation accounting for international knowledge spillovers. Our results confirm the role of demand-pull effects, proxied by energy prices, and of technological opportunity, proxied by the knowledge stocks. Our results show that spillovers between countries have a significant positive impact on further innovation in energy-efficient and environmentally friendly technologies.