STREAM DISCHARGE PREDICTION VIA A GRID BASED SOIL WATER ROUTING WITH PADDY FIELDS1

ABSTRACT: A grid based daily hydrologic model for a watershed with paddy fields was developed to predict the stream discharge. ASCII formatted elevation, soil, and land use data supported by the GRASS Geographic Information System are used to generate distributed results such as surface runoff and subsurface flow, soil water content, and evapotranspiration. The model uses a single flow path algorithm and simulates a water balance at each grid element. A linear reservoir assumption was used to predict subsurface runoff components. The model was applied to a 75.6 km² watershed located in the middle of South Korea, and observed stream flow hydrographs from 1995 and 1996 were compared to model predictions. The stream flow predictions of 1995 and 1996 generally agreed with the observed flow, resulting in a Nash‐Sutcliffe efficiency R² of 0.60 and 0.62, respectively. The hydraulic conductivity for percolating water through the saturated layer affected baseflow generation. The levee height of the paddy influenced the time and magnitude of the surface runoff, depending on irrigation management. The model will be used for making low flow management decisions by evaluating the role of each land use to stream flow, especially in case of paddy decrease by gradual urbanization of a watershed.     

A comparison of refrigerant management policies and suggestions for improvement in South Korea

HFCs (hydrofluorocarbons) emerged as alternative refrigerants after the production of chlorofluorocarbons was banned and hydrochlorofluorocarbons were phased out, under the Montreal Protocol on Substances that Deplete the Ozone Layer. However, because the Kyoto Protocol considered HFCs as greenhouse gases, and their impact on climate change has been increasing, major developed countries have been strengthening existing regulations on the use of HFCs as refrigerants. South Korea has also passed various legislations related to refrigerant management. However, reports indicate that implementation of these regulations has been ineffective, due to the absence of a specific system for managing the production, use, and disposal phases of refrigerants. To identify and resolve these issues, this study investigates the current state of refrigerant management in South Korea for those three phases. Refrigerant management policies are compared between different legislatures, using the examples of the European Union, United States, and Japan. Based on the findings, five types of measures are suggested to reduce the production and consumption of refrigerants, and to improve refrigerant management regulations in ways that are most appropriate to the South Korean context.     

Numerical study of heat transfer characteristics of char from waste tire pyrolysis

To investigate heat transfer of char from waste tire pyrolysis, the cooling of char was simulated by the computational fluid dynamics. To scrutinize the heat transfer characteristics, bed height, temperature of cooling wall, and mixing time were selected as calculation parameters. From the results, increasing the char bed height from 0.005 to 0.02 m, the total heat transfer is decreased as from 45.5 to 26.5 J. As the char bed height is further increased from 0.02 to 0.06 m, the total heat transfer is decreased from 26.5 to 9.1 J. The char bed height affects the total heat transfer significantly. The total heat transfer decreases from 15.9 to 14.0 J as the temperature of cooling wall increases from 273.15 to 323.15 K. The total heat transfer mildly depends on the temperature of cooling wall. The particle mixing time increases from 10 to 120 s and the total heat transfer decreases from 28.6 to 22.6 J. It is noted that the particle contact is enhanced between char particles as well as the particles and cooling wall as the particle mixing time decreases. Consequently, heat transfer is augmented.     

Analysis of the nitrifying bacterial community in BioCube sponge media using fluorescent in situ hybridization (FISH) and microelectrodes

There is growing interest in the development of more cost-effective and retrofit technologies for the upgrade and expansion of existing wastewater treatment plants with extreme space constraints. A free-floating sponge media (BioCube) process, using a 24L lab scale reactor, was operated to study the nitrification profiles and microbial community. The COD removal efficiencies were maintained, at an average of 95%, with the mixed liquor suspended solids (MLSS) inside the BioCube sponge media maintained at 12,688mg/L. The nitrification removal efficiencies were between 92% and 100%, with an average value of 99%. From the results of microelectrode measurements, the ammonium ion concentration was found to rapidly decrease from the surface of the BioCube sponge media to a depth of 2mm due to chemical reactions carried out by ammonia oxidizing bacteria (AOB) species. Multi-fluorescence in situ hybridization (FISH) has been used to investigate the spatial distributions of various microbial activities within reactors. Microbial communities were targeted using different oligonucleotide probes specific to AOB and nitrite oxidizing bacteria (NOB). There were a large number of AOB populations, but these were not uniformly distributed in the biofilm compared to the NOB populations.     

In-situ electrochemical measurements of total concentration and speciation of heavy metals in acid mine drainage (AMD): assessment of the use of anodic stripping voltammetry

We assessed the use of anodic stripping voltammetry (ASV) for in-situ determinations of both total concentration and speciation of dissolved heavy metals (Cd, Cu, Pb and Zn) in acid mine drainage (AMD). In the Kwangyang Au–Ag mine area of South Korea, different sites with varying water chemistry within an AMD were studied with a field portable anodic stripping voltammeter. Anodic stripping voltammetry after wet oxidation (acidification) was very sensitive enough to determine total concentration of dissolved Cd because Cd was dominantly present as ‘labile’ species, whilst the technique was not so effective for determining total Cu especially in the downstream sites from the retention pond, due to its complexation with organic matter. For dissolved Pb, the concentrations determined by ASV after wet oxidation generally agreed with those by ICP-AES. In the downstream samples (pH>5), however, ASV data after wet oxidation were lower than ICP-AES data because a significant fraction of dissolved Pb was present in those samples as ‘inert’ species associated with colloidal iron oxide particles. The determination of total dissolved Zn by ASV after wet oxidation appeared to be unsatisfactory for the samples with high Cu content, possibly due to the interference by the formation of Zn–Cu intermetallic compounds on the mercury coated electrode. In AMD samples with high dissolved iron, use of ultraviolet irradiation was not effective for determining total concentrations because humate destruction by UV irradiation possibly resulted in the removal of a part of dissolved heavy metals from waters through the precipitation of iron hydroxides.     

Distribution and hydrodynamic model of the Keumdong oil spill in Kwangyang Bay, Korea

Oil concentrations in the seawater, seabed sediments, and shoreline sediments were measured from the samples collected 165 days after the Keumdong oil spill accident, which had occurred in Kwangyang Bay of the South Sea, Korea in September 1993. Distribution patterns of the concentrations in the seabed and shoreline sediments have allowed us to hindcast the transport and fate of the spilled oil. Overall, the patterns agree better with the southward (seaward) surface water circulation than with the northward (landward) bottom water circulation over the region. Rapid, initial dispersal of the spilled oil to the south and its subsequent grounding onto the intertidal seabed sediments, as well as onto the shorelines, appear to have made ineffective the subsurface oil transport by the bottom current.     

US Energy Conservation and Efficiency: Benefits and Costs

With increased energy conservation plus the adoption of diverse energy efficient technologies, the US economy could save about 32 quads or about 33% of its current energy consumption, if sound conservation energy use policies were implemented over approximately 10 years. This potential of 32 quads is slightly greater than the current US oil imports. The systems that have the greatest potential to provide major energy savings are transportation, residential energy use, and the food system. Not only saving energy has merit in itself, but it would save US citizens approximately $438 billion per year, helping support the US economy, a high standard of living, and energy security. In addition, this analysis suggests that reducing the $40 billion in taxpayer money spent on subsidies of the energy industries would further increase conservation.     

Behaviors of intercellular materials and nutrients in biological nutrient removal process supplied with domestic wastewater and food waste.

A four-stage biological nutrient removal (BNR) process was operated to investigate the effect of anaerobically fermented leachate of food waste (AFLFW) as an external carbon source on nutrient removal from domestic wastewater having a low carbon-to-nitrogen ratio. The BNR system that was supplemented with AFLFW showed a good performance at a sludge retention time (SRT) of 30 days, despite low temperature. With this wastewater, average removal efficiencies of soluble chemical oxygen demand (COD), total nitrogen (T-N), and total phosphorus (T-P) were 88 to 93%, 70 to 74%, and 63 to 68%, respectively. In this study, several kinds of poly-hydroxyalkanoates (PHAs) were observed in cells. These included 24% poly-3-hydroxybutyrate (PHB), 41% poly-3-hydroxyvalerate (PHV), 18% poly-3-hydroxyhexanoate (PHH), 10% poly-3-hydroxyoctanoate (PHO), 5% poly-3-hydroxydecanoate (PHD). and 2% poly-3-hydroxydodecanoate (PHDD), indicating that microorganisms could store various PHAs through the different metabolic pathways. However, breakdown of the enhanced biological phosphorus removal (EBPR) mechanism was observed when SRT increased from 30 to 50 days for the enhancement of nitrification. To study the effect of SRT on EBPR, a sequencing batch reactor (SBR) system that was supplied with glucose was operated at various SRTs of 5, 10, and 15 days. Nitrification and denitrification efficiencies increased as SRT increased. However, the content of intracellular materials such as PHAs, glycogen. and poly-P in cells decreased. From these results, it was concluded that SRT should be carefully controlled to increase nitrification activity and to maintain biological phosphorus removal activity in the BNR process.     

Analysis of gas flow behavior in an annular fluidized-bed reactor for polystyrene waste treatment

The characteristics of bubble properties and the chaotic flow behavior of gas were investigated in an annular fluidized bed (0.102 m in inner diameter and 2 m in height) because the behavior of gas flow in such a reactor is one of the important factors governing reactor operation, reactor performance, and the reaction itself. Pressure fluctuations as a state variable for the analysis of gas flow behavior were measured and analyzed. Bubble properties were determined by adopting the cross-correlation function of pressure fluctuations. The resultant chaotic flow behavior of gas was interpreted by means of chaotic parameters such as the Kolmogorov entropy. It was found that the Kolmogorov entropy could be utilized effectively to explain the nonlinear dynamic behavior of gas-solid flow in the annular fluidized bed. The pierced length and rising velocity of bubbles increased with increasing gas velocity, bed temperature, and particle size of the bed material. The bubble frequency increased with increasing gas velocity and bed temperature, while it decreased with increasing particle size of the bed material. Correlations to predict the bubble properties in annular fluidized-bed reactors were suggested.     

Effects of copper (I) oxide on growth and biochemical compositions of two marine microalgae

In copper based antifouling (AF) paints Cu (I) oxide was largely used as booster biocide. In this study effect of Cu (I) oxide on two marine microalgae, Tetraselmis suecica and Dunaliella tertiolecta was demonstrated. EC50 (96 hr) concentrations estimated for T. suecica and D. tertiolecta were 1.3 mg l(-1) and 1.34 mg l(-1), respectively. Copper (I) oxide induced changes in growth, chlorophyll, carbohydrate and protein contents were observed in T. suecica and D. tertiolecta. At low concentration of 0.0625 mg l(-1), 3-26% and 1-16% growth stimulation was observed in T. suecica and T. tertiolecta respectively. Increasing Cu (I) oxide concentrations proportionately decreased the carbohydrate and protein contents. This study clearly indicates the toxicity of excessive Cu (I) oxide on growth and biochemical compositions of T. suecica and D. tertiolecta.