Mechanical and Barrier Properties of Biodegradable Films Made from Chitosan and Poly (Lactic Acid) Blends

Biodegradable film blends of chitosan with poly(lactic acid) (PLA) were prepared by solution mixing and film casting. The main goal of these blends is to improve the water vapor barrier of chitosan by blending it with a hydrophobic biodegradable polymer from renewable resources. Mechanical properties of obtained films were assessed by tensile test. Thermal properties, water barrier properties, and water sensitivity were studied by differential scanning calorimeter analysis, water vapor permeability measurements, and surface-angle contact tests, respectively. The incorporation of PLA to chitosan improved the water barrier properties and decreased the water sensitivity of chitosan film. However, the tensile strength and elastic modulus of chitosan decreased with the addition of PLA. Mechanical and thermal properties revealed that chitosan and PLA blends are incompatible, consistent with the results of Fourier transform infrared (FTIR) analysis that showed the absence of specific interaction between chitosan and PLA.     

Temporal variation in protein, carbohydrate, and lipid concentrations in Paramuricea clavata (Anthozoa, Octocorallia): evidence for summer–autumn feeding constraints

Temporal variations in protein, carbohydrate, and lipid levels were studied in a passive suspension feeder, the gorgonian Paramuricea clavata. The samples were collected every month for mature and immature colonies over a three-year period (1997–2000). The relationship between biochemical composition and reproductive output was examined on the basis of the 1998 and 1999 data. In female and male P. clavata colonies, the tissue displayed differences in lipid concentrations only in winter–spring, due to the high lipid levels attained by female colonies in this period. Immature colonies showed significant differences in lipid concentration only with respect to mature females in spring. There were clear seasonal trends in the lipid and carbohydrate levels in P. clavata, with maximum values in winter–spring [male lipid 212±75 SD μg mg⁻¹ of organic matter (OM) and female lipid 274±103 SD μg mg⁻¹ of OM; male and female carbohydrate 68±14 SD μg mg⁻¹ of OM], coinciding with maximum food concentration/quality, and minimum values in summer–autumn (male and female lipid 155±57 SD μg mg⁻¹ of OM; male and female carbohydrate 56±14 SD μg mg⁻¹ of OM), coinciding with low food concentration/quality. The relationship between reproductive output and tissue concentrations of lipids, carbohydrates, and proteins was not straightforward, although there was an evident overlap of the lipid accumulation and the gonadal development. The results of this study show that protein, carbohydrate, and lipid levels may provide a record of episodes in the ecological cycle bearing on the trophic aspects of the target species. The results indicate that information on seasonal biochemical levels may explain benthopelagic coupling processes, provided factors such as natural diet, feeding rates, reproduction, and growth are well understood.     

Are flocculants required in a flocculant process?

The effectiveness of solids abatement by pH increase was investigated using the jar test procedure with a bentonite tap water suspension and an urban wastewater and an oxidation pond effluent. The results indicated that, depending on the suspended particles and on the dissolved ions, pH values between 9.5 and 12 induced extensive solids elimination without adding any other chemical than a base, i.e. sodium hydroxide or lime. The major effective reactions are then the calcium carbonate precipitation and the magnesium hydroxide precipitation. Moreover, this process does not require a flocculation step but only a precipitation step where the particles are entrapped by sweep coagulation and adsorption-coagulation. A continuous reactor was operated with an oxidation pond effluent. A suspended solids concentration less than 30 mg/l was obtained by adjusting pH between 11 and 11.5 while the reactor was operated up to 20 m/h superficial upflow velocity corresponding to a residence time through the whole unit of only 5 minutes. The sludge settling velocity depends on pH and on the primary particles but a maximum settling velocity larger than 1 m/h is easily reached. The concentration factor is then about 100. Environmental policy implications of this technique are that it allows to significantly upgrade a stabilization pond effluent and can be used when a high pH situation is acceptable.     

Photodegradation and Biodegradation Study of a Starch and Poly(Lactic Acid) Coextruded Material

To simulate the behavior of agricultural mulch coextruded poly(lactic acid)(PLA)/starch films, two stages were carried out. The first was an ultraviolet treatment (UV) at 315 nm, during which glass transition temperature T_g, weight, and molecular weight (MW) decreased and a separation between PLA and starch phase was observed. For the second stage, the mineralization of the carbon of the material was followed using the ASTM (D 5209–92 and 5338–92) and ISO/CEN (14852 and 14855) standard procedures. To measure the biodegradability of polymer material, the assessment of the carbon balance allowed determination of the distribution between the carbon rate used to the biomass synthesis or the respiration process (released CO₂), as well as the dissolved organic carbon into the culture medium and the carbon in the residual insoluble material. The influence of the nature of the medium and the standardized procedures on the final rate of biodegradation was investigated. Whatever the standardized method, the biodegradation percentage was significantly stronger in liquid medium (92.4–93.4) than on inert medium (80–83%). In the case of the compost process, only released CO₂ was measured and corresponded to 79.1–80.3%.     

Different Pla Grafting Techniques on Chitosan

PLA grafting on chitosan has been successfully prepared with two different methods: a direct grafting method and the ROP method. The thermal properties showed that the copolymerization of PLA on the chitosan’s chain by direct grafting is more thermostable than the one obtained by the ROP method.     

Quantification of sexual reproduction in the marine benthic hydroid Campanularia everta

Campanularia everta is an epiphytic hydroid that may form dense populations on the macroalga Halimeda tuna. The main objects of this study were to quantify sexual reporduction and estimate sexual reproductive output of this hydroid. Sexual reproduction occurred from mid-October to mid-December 1991 along the Spanish Mediterranean coast. During this period, male and female colonies formed gonangia. Four oocytes mature in each female gonangium, and embryonic development starts probably after internal fertilization occurs. Planulae complete their development within a mucus sheath attached to the top of the gonotheca (acrocyst). Eight successive gonangia with a life-span of 1 wk each were formed over a 2 mo period. The fertile period was characterized by high initial production of gonangia followed by a progressive decline resulting from a decrease both in the number of fertile colonies and in the gonangia density of fertile colonies. Annual production was estimated at 42000 gonangia m^-2, representing 83000 oocytes m^-2. The high fertilization rates observed (77 to 100%) yielded a minimum production of 64000 planulae m^-2. Reproduction in C. everta is characterized by: (1) a high number of larvae produced m^-2; (2) formation and gradual release of larvae throughout the sexual reproduction period; (3) direct formation of planulae with no intermediate medusa stage; (4) low dispersive ability of the planula. All these mechanisms are part of a reproductive strategy designed to ensure the permanence of the population in its habitat.     

Effects of ultraviolet light (315 nm), temperature and relative humidity on the degradation of polylactic acid plastic films

The influence of temperature (30, 45 and 60 degrees C) and relative humidity (RH) (30%, 50% and 100%) on the degradation of poly(l-lactic acid) (PLA) films were studied. In addition, the effects of ultraviolet (UV) light (315 nm) on the degradation of PLA films were also analyzed. Various analytical techniques were applied to observe changes in the properties of PLA polymer films. FTIR spectroscopy was used as semi-quantitative method to get information about the chemistry of the degradative process. The degradation rate of PLA was enhanced by increasing temperature and RH, factors responsible for a faster reduction of the weight-average molecular weight (M(W)), of the glass transition temperature (Tg) and of the percentage of elongation at break. Moreover, UV treatment accelerated these phenomena.     

Temporal variability in zooplankton prey capture rate of the passive suspension feeder<Emphasis Type="Italic"> Leptogorgia sarmentosa</Emphasis> (Cnidaria: Octocorallia), a case study

There is increasing evidence that suspension feeders play a significant role in plankton–benthos coupling. However, to date, active suspension feeders have been the main focus of research, while passive suspension feeders have received less attention. To increase our understanding of energy fluxes in temperate marine ecosystems, we have examined the temporal variability in zooplankton prey capture of the ubiquitous Mediterranean gorgonian Leptogorgia sarmentosa. Prey capture was assessed on the basis of gut content from colonies collected every 2 weeks over a year. The digestion time of zooplankton prey was examined over the temperature range of the species at the study site. The main prey items captured were small (80–200 µm), low-motile zooplankton (i.e. eggs and invertebrate larvae). The digestion time of zooplankton prey increased when temperature decreased (about 150% from 21°C to 13°C; 15 h at 13°C, 9 h at 17°C, and 6 h at 21°C), a pattern which has not previously been documented in anthozoans. Zooplankton capture rate (prey polyp^–1 h^–1) varied among seasons, with the greatest rates observed in spring (0.16±0.02 prey polyp^–1 h^–1). Ingestion rate in terms of biomass (g C polyp^–1 h^–1) showed a similar trend, but the differences among the seasons were attenuated by seasonal differences in prey size. Therefore, ingestion rate did not significantly vary over the annual cycle and averaged 0.019±0.002 g C polyp^–1 h^–1. At the estimated ingestion rates, the population of L. sarmentosa removed between 2.3 and 16.8 mg C m^–2 day^–1 from the adjacent water column. This observation indicates that predation by macroinvertebrates on seston should be considered in energy transfer processes in littoral areas, since even species with a low abundance may have a detectable impact.Communicated by S.A. Poulet, Roscoff     

Spatial variability in reproductive cycle of the gorgonians <Emphasis Type="Italic">Paramuricea clavata</Emphasis> and <Emphasis Type="Italic">Eunicella singularis</Emphasis> (Anthozoa,Octocorallia) in the Western Mediterranean Sea

Paramuricea clavata (Risso, 1826) and Eunicella singularis (Esper, 1794) are the most representative gorgonian species in hard bottoms sublittoral communities in the Western Mediterranean Sea. Reproductive cycles of two populations of both species were studied in two distinct locations approximately 600 km apart (Medes Islands and Cape of Palos), in order to assess interpopulation variability on a relevant geographic scale. Seasonal variation of lipid concentration levels in the gorgonian tissue was used as a tool to quantify energy storage by each studied population in order to explain possible interpopulation differences in gonadal output. Sex ratio in Medes Islands populations of both species was 1:1, while in Cape of Palos sex ratio was significantly male biased (1:7) in P. clavata, and female biased (1.7:1) in E. singularis populations. Spawning timing occurred in all cases coinciding with a marked increase in sea-water temperature in spring, and after the most successful feeding season, but comparing localities there was a clear temporal shift in the time of gametes release, appearing well linked to the shift in sea-water temperature rising in spring in both sites at the depth where populations are placed. Therefore, in this study the temperature appears as the main synchronizing factor of gonadal development within these populations. Significant differences in gonadal volume per polyp were found in both species owing mainly to differences in the number of gonads per polyp between populations, with Cape of Palos populations displaying higher values in both studied species, suggesting that the exposition to different local conditions may be reverted in a different gonadal output. But the observed patterns in lipid concentrations levels in gorgonians disable us to conclude that lipid concentration levels explain the observed differences in gonadal output found in this study.