A new method to quantify the impact of soil carbon management on biophysical soil properties: the example of two apple orchard systems in New Zealand

A new method to diagnose the environmental sustainability of specific orchard management practices was derived and tested. As a significant factor for soil quality, the soil carbon (C) management in the topsoil of the tree-row of an integrated and organic apple orchard was selected and compared. Soil C management was defined as land management practices that maintain or increase soil C. We analyzed the impact of the soil C management on biological (microbial biomass C, basal respiration, dehydrogenase activity, respiratory quotient) and physical (aggregate stability, amount of plant-available water, conductive mean pore diameter near water saturation) soil properties. Soil in the alley acted as a reference for the managed soil in the tree row. The total and hot-water-extractable C amounts served as a combined proxy for the soil C management. The soil C management accounted for 0 to 81% of the degradation or enhancement of biophysical soil properties in the integrated and organic system. In the integrated system, soil C management led to a loss of C in the top 0.3 m of the tree row within 12 yr, causing a decrease in microbial activities. In the tree row of the organic orchard, C loss occurred in the top 0.1 m, and the decrease in microbial activities was small or not significant. Regarding physical soil properties, the C loss in the integrated system led to a decrease of the aggregate stability, whereas it increased in the organic system. Generally, the impact of soil C management was better correlated with soil microbial than with the physical properties. With respect to environmental soil functions that are sensitive to the decrease in microbial activity or aggregate stability, soil C management was sustainable in the organic system but not in the integrated system.     

Biodegradable Water Soluble Copolymer for Antimicrobial Applications

Synthesis and characterization of novel biodegradable, water soluble and optically active DL-malic acid (DMA) and citric acid (CA) copolymers were studied for possible use as antibacterial agents. The copolymers were synthesized by direct bulk melt condensation in the absence of a catalyst above 150 °C. Characterization of obtained copolymers was carried out with the help of infrared absorption spectra, differential scanning calorimetry and thermo gravimetric analysis. The antibacterial activity of copolymers against bacteria was investigated. The results obtained shows the above copolymers possess a broad wound dressing activity against different types of bacteria and may be useful as antibacterial agents.     

Reproductive status influences group size and persistence of bonds in male plains zebra (<Emphasis Type="Italic">Equus burchelli</Emphasis>)

Animal groups arise from individuals’ choices about the number, characteristics, and identity of associates. Individuals make these choices to gain benefits from their associations. As the needs of an individual change with its phenotype, so too we expect the nature of its associations to vary. In this paper, we investigate how the social priorities of male plains zebra (Equus burchelli) depend on reproductive state. An adult male is either a bachelor, and lacking mating access, or a stallion defending a harem. Multiple harems and bachelor males aggregate in larger herds. Herds frequently split and merge, affording males opportunities to change associates. Over a 4-year period, we sampled the herd associations in a population of 500–700 zebras. To isolate the effects of reproductive state on male social behavior, we account for potential confounding factors: changes in population size, grouping tendencies, and sampling intensity. We develop a generally applicable permutation procedure, which allows us to test the null hypothesis that social behavior is independent of male status. Averaging over all individuals in the population, we find that a typical bachelor is found in herds containing significantly more adults, bachelors, and stallions than the herds of a typical stallion. Further, bachelors’ bonds with each other are more persistent over time than those among stallions. These results suggest that bachelors form cohesive cliques, in which we may expect cooperative behaviors to develop. Stallion–stallion associations are more diffuse, and less conducive to long-term cooperation. This contribution is part of the special issue “Social Networks: new perspectives” (Guest Editors: J. Krause, D. Lusseau and R. James).     

Updraft gasification of juniper wood biomass using CO2–O2 and Air (N2–O2)

Biomass gasification is being considered as one of the most promising technologies for converting low-quality solid biomass fuel into gaseous fuel. Redberry juniper (Juniperus pinchotii), one of the woody species that dominate uncultivated lands in the southern great plains, USA, may have a great potential for bioenergy utilization. In this study, the results of gasification of juniper are presented. Juniper wood chips were gasified in an adiabatic fixed bed updraft gasifier using air and the mixture gas of carbon dioxide and oxygen (CO₂:O₂) as gasification medium. The effect of gasification parameters such as moisture contents, gasification mediums, and gasification temperature on produced gas properties and the tar yield were investigated. It was observed that oxy fuel gasification (the reaction of woody fuels with carbon dioxide) of juniper resulted in the increase of production of carbon monoxide, especially at higher peak gasification temperatures. As a result, the CO₂ gasification resulted in producing higher heating value gas (6264 kJ/nm³ with dilution of CO₂ and 19,750 kJ/nm³ inert free) compared to air gasification. For air gasification, it was observed that the updraft gasification produced large amount of the tar in the product gas (more than 100 g/nm³) for the fuels with moisture content between 6% and 11%. Generally, the tar yield increased with the increase of equivalence ratio (er) and moisture content. However, when the fuel moisture content reached 23.5%, the tar yield reduced significantly due low gasification temperature which reduced the less tar cracking.     

Non-linear regression model for spatial variation in precipitation chemistry for South India

Chemical composition of rainwater changes from sea to inland under the influence of several major factors – topographic location of area, its distance from sea, annual rainfall. A model is developed here to quantify the variation in precipitation chemistry under the influence of inland distance and rainfall amount. Various sites in India categorized as ‘urban’, ‘suburban’ and ‘rural’ have been considered for model development. pH, HCO₃, NO₃ and Mg do not change much from coast to inland while, SO₄ and Ca change is subjected to local emissions. Cl and Na originate solely from sea salinity and are the chemistry parameters in the model.Non-linear multiple regressions performed for the various categories revealed that both rainfall amount and precipitation chemistry obeyed a power law reduction with distance from sea. Cl and Na decrease rapidly for the first 100 km distance from sea, then decrease marginally for the next 100 km, and later stabilize. Regression parameters estimated for different cases were found to be consistent (R² ～ 0.8). Variation in one of the parameters accounted for urbanization. Model was validated using data points from the southern peninsular region of the country. Estimates are found to be within 99.9% confidence interval.Finally, this relationship between the three parameters – rainfall amount, coastline distance, and concentration (in terms of Cl and Na) was validated with experiments conducted in a small experimental watershed in the south-west India. Chemistry estimated using the model was in good correlation with observed values with a relative error of ～5%. Monthly variation in the chemistry is predicted from a downscaling model and then compared with the observed data. Hence, the model developed for rain chemistry is useful in estimating the concentrations at different spatio-temporal scales and is especially applicable for south-west region of India.     

Advanced design techniques in passive and active tubular solar stills: a review

Environmental Science and Pollution Research - Clean water production using green energy supply plays a significant role in the globe’s health and economic development. In recent years, so...     

Laboratory and field evaluation of Metarhizium anisopliae for the control of Dengue vector,Aedes aegypti (Insecta: Diptera: Culicidae)

Biological control at the larval stages of development of mosquitoes is one of the techniques that afford a non-expensive, easy-to-use, and environment-friendly method for mosquito control. In this study, investigations were undertaken on microbial product to develop a strategy to control mosquito larval and pupal population in the lab and field. Highest larval mortality was evident in the lab with LC₅₀ and LC₉₀ at 0.25 and 0.5 at 24?h for Aedes aegypti. In the field study, to kill mosquito larval population resulting in 100% mortality of A. aegypti required 5 days duration. The dose-dependent mortality was calculated using a lethal time of approximately 1–5 days test period. The number of mosquito bites (%) (vectorial capacity) decreased at increasing concentration of fungal insecticide. Data indicate that the fungal pathogen interacting with mosquito larvae controlled mosquitoes in the lab and field.     

Development of chitosan-alginate based biosorbent for the removal of p-chlorophenol from aqueous medium

Removal of p-chlorophenol (pCP) from synthetic aqueous solutions was studied through adsorption on a biosorbent developed from chitosan (CS) and sodium alginate (SA), the natural cationic and anionic polysaccharides, respectively. Chitosan-coated sodium alginate beads were prepared and treated with calcium chloride solution in order to improve the stability as well as hydrophobic character. The resulting beads (CS/CA) were characterized using FTIR spectra, scanning electron microscopy (SEM), and BET surface analysis. The efficiency of this biosorbent in removing pCP from aqueous medium was studied under batch equilibrium and dynamic column flow experimental conditions. The binding capacity of the biosorbent was studied as a function of initial pH, contact time, initial concentration of adsorbate and amount of biomass. The data were fitted to pseudo-first-order, pseudo-second-order, and Weber–Morris models and found that the adsorption process followed pseudo-first-order kinetics. Further, the equilibrium data were fitted to Freundlich, Langmiur, and Dubinin–Radushkevich (D–R) adsorption isotherms and the isotherm constants were evaluated for adsorption of pCP. The maximum monolayer adsorption capacity of CS/CA beads was found to be 127 mg g^?1. Column flow results were used to generate breakthrough curves. The experimental results suggested that the chitosan–calcium alginate blended biosorbent was effective for the removal of pCP from aqueous medium.     

Multicystic dysplastic kidney: Natural history of prenatally detected cases

To delineate the natural history of fetal multicystic dysplastic kidneys (MDKs), all cases that were prenatally detected in the Prenatal Diagnosis Center of the University of Virginia from September 1985 to 31 August 1988 were reviewed. All patients were followed through the Center with serial ultrasound evaluations at approximately 4-week intervals, and each liveborn infant was evaluated and followed by one of the authors (S.S.H.) Of the 14 cases detected, ten were detected in the second trimester, the earliest at 16·5 weeks' gestation. Of the nine fetuses with non-lethal disease, there were two cases in which the lesion remained unchanged during observation. Both had an initial diagnosis in the third trimester. In those cases diagnosed in the second trimester (7), all showed an initial increase in the size and number of cysts, followed by involutional changes either in utero (2) or in the neonatal period (3). Two infants had immediate surgical removal of the MDK, one because of respiratory compromise, and the other because of an uncertain diagnosis on renal scan. Abnormalities of the contralateral kidney were found in 7 of 14 fetuses. Five were lethal conditions. Associated non-renal abnormalities were common in bilateral MDK (80 per cent), but rare in unilateral MDK (11 per cent).