Assessing groundwater quality and its sustainability in Joypurhat district of Bangladesh using GIS and multivariate statistical approaches

Sustainable groundwater quality is a key global concern and has become a major issue of disquiets in most parts of the world including Bangladesh. Hence, the assessment of groundwater quality is an important study to ensure its sustainability for various uses. In this study, a combination of multivariate statistics, geographical information system (GIS) and geochemical approaches was employed to evaluate the groundwater quality and its sustainability in Joypurhat district of Bangladesh. The results showed that the groundwater samples are mainly Ca–Mg–HCO₃ type. Principal component analysis (PCA) results revealed that geogenic sources (rock weathering and cation exchange) followed by anthropogenic activities (domestic sewage and agro-chemicals) were the major factors governing the groundwater quality of the study area. Furthermore, the results of PCA are validated using the cluster analysis and correlation matrix analysis. Based on the groundwater quality index (GWQI), it is found that all the groundwater samples belong to excellent to good water quality domains for human consumption, although iron, fluoride and iodide contaminated to the groundwater, which do not pose any significant health hazard according to World Health Organization’s and Bangladesh’s guideline values. The results of irrigation water quality index including sodium adsorption ratio (SAR), permeability index and sodium percentage (Na %) suggested that most of the groundwater samples are good quality water for agricultural uses. The spatial distribution of the measured values of GWQI, SAR, Fe (iron), EC (electrical conductivity) and TH (total hardness) were spatially mapped using the GIS tool in the study area.     

Treibhausgasemissionen zukünftiger Erdgasbereitstellung für Deutschland

Ohne Zusammenfassung Original erschienen in UWSF – Z Umweltchem ?kotox 20(2):133–144 (2008) DOI: Herausgeber: Martin Pehnt und Eckard Helmers     

Upper limb load as a function of repetitive task parameters: part 2--an experimental study.

The aim of the study was to compare the theoretical indicator of upper limb load with the physiological indicator of musculoskeletal load, which is present while performing a repetitive task (a normalized electromyography [EMG] amplitude recorded from the muscles of the upper limb involved in the performed task). In an experimental study of a repetitive task, the EMG signal from 5 main muscles of the shoulder girdle, arm and forearm was registered: extensor carpi radialis longus, flexor carpi ulnaris, deltoideus anterior, biceps brachii caput breve and trapezius descendent. The results of the study showed a strong correlation between the theoretical indicator (Integrated Cycle Load) and the physiological indicator (root mean square of a normalized EMG amplitude from the 5 muscles). This proves that the developed theoretical indicator can be accepted as an indicator of upper limb musculoskeletal load during a work task.     

Development of a test method against hot alkaline chemical splashes.

High temperature alkaline chemical liquids have caused injuries and hazardous situations in Finnish pulp manufacturing mills. There are no requirements and/or test method standards concerning protection against high temperature alkaline chemical splashes. This paper describes the test method development process to test and identify materials appropriate for hot liquid chemical hazard protection. In the first phase, the liquid was spilled through a stainless steel funnel and the protection performance was evaluated using a polyvinyl chloride (PVC) film under the test material. After several tentative improvements, a graphite crucible was used for heating and spilling the chemical, and a copper-coated K-type thermometer with 4 independent measuring areas was designed to measure the temperature under the material samples. The thermometer was designed to respond quickly so that peak temperatures could be measured. The main problem was to keep the spilled amount of chemical constant, which unfortunately resulted in significant variability in data.     

Effects of calcium hydroxide and calcium chloride addition to bentonite in iron ore pelletization.

Pyrite ash is created as waste from the roasting of pyrite ores during the production of sulphuric acid. These processes generate great amounts of pyrite ash waste that is generally land filled. This creates serious environmental pollution due to the release of acids and toxic substances. Pyrite ash waste can be utilized in the iron production industry as a blast furnace feed to process this waste and prevent environmental pollution. The essential parameters affecting the pelletization process of pyrite ash were studied using bentonite as a binder. Experiments were then carried out using bentonite and a mixture of bentonite with calcium hydroxide and calcium chloride in order to make the bentonite more effective. The metallurgical properties of pyrite ash, bentonite, calcium hydroxide, calcium chloride, a mixture of these and sintered pellets were studied using X-ray analysis. The crushing strength tests were carried out to investigate the strength of pyrite ash waste pellets. The results of these analyses showed that pyrite ash can be agglomerated to pellets and used in the iron production industry as a blast furnace feed. The crushing strength of the pellets containing calcium hydroxide and calcium chloride in addition to bentonite was better than the strength of pellets prepared using only bentonite binder.     

Working backwards to move forwards: Graph-based connectivity metrics for reserve network selection

In this paper we apply graph theory in a reserve selection exercise to explore the tradeoffs between maintaining connectivity and minimizing the total area of a protected area network. Rather than focus on a single organism, we used a multi-species approach and looked at the tradeoff curves for organisms with varying dispersal abilities. We first generated the tradeoff curves using a graph-based metric to determine the importance of individual patches for maintaining connectivity. We then performed an analogous set of analyses using patch size as a surrogate measure of importance.     

Multivariate analysis of the bioaccumulation of polychlorinated biphenyls (PCBs) in the marine pelagic food web from the southern part of the Baltic Sea,Poland

The concentration, pattern, bioaccumulation and biomagnification features of many chlorobiphenyl congeners including non- and mono-ortho chlorine substituted members have been determined in a pelagic food chain including mixed phyto- and zooplankton, herring (Clupea harengus), harbour porpoise (Phocoena phocoena) and black cormorants (Phalacrocorax carbo sinensis) collected from the southern part of the Baltic Proper. TCDD (tetrachlorodibenzo-p-dioxin) toxic equivalents (TEQs) in plankton, herring, harbour porpoise and cormorants were 0.42, 5.3, 79 and 2,700 pg g(-1) lipid weight, respectively. Concentrations of total polychlorinated biphenyls (PCBs) in plankton, herring, harbour porpoise and cormorants were 1.9, 120, 8700 and 2,100 ng g(-1) wet weight (210, 1,300, 10,000 and 42,000 ng g(-1) lipid weight) respectively. Herring, harbour porpoise and black cormorant apparently bioaccumulate many PCBs found in their food, and the values of the bioaccumulation factors (BAFs) for PCBs were approximately 10 in herring, 35 in harbour porpoise and up to 300 in breast muscle of cormorants. Harbour porpoise clearly is able to metabolize the most toxic non-ortho PCBs (no. 77, 126 and 169) and a few mono-ortho PCBs (no. 114, 123 and 156), while all non- and mono-ortho PCBs are bioaccumulated by herring. Penta-, hexa- and hepta-CBs were the dominatant homologue classes both in the muscle tissue and liver. PCB congeners nos. 201, 209, 172/192, 194 and 195 were characterized by the largest BAFs (between 100 and 300). Principal component analysis has been used to analyse the interdependences and differences in the CB congener accumulation patterns between the components of the investigated pelagic food web.     

Dioxin-like compounds in pine needles around Tokyo Bay, Japan in 1999

Pine needle samples collected at ten spatially distant sites around Tokyo Bay in 1999 indicated a widespread lower troposphere pollution with ultra-trace dioxin-like compounds such as chlorodibenzo-p-dioxins (PCDDs), -furans (PCDFs), non-ortho- and mono-ortho-chlorobiphenyls (pPCBs), and -naphthalenes (PCNs). Elevated concentration of planar PCBs and the total PCNs were found at the sites which are located innermost to the Bay, suggesting the regional importance of the evaporative nature of the source of pollution by those compounds over this vast area. The concentrations and profiles for PCDDs and PCDFs remained largely uniform. An exception was the site near the town of Tateyama in the Chiba Prefecture, which is the southernmost but also relatively separate from the inner Bay. The site near Tateyama showed somehow background contamination with all compound groups and highly different profiles of PCNs. The principal component analysis (PCA) of the data matrix has revealed that around the Tokyo Bay, apart from the evaporative emission sources for PCNs and PCBs, combustion related processes also play an important role as sources of the ambient air contamination not only with PCDDs/Fs but also with chloronaphthalenes and planar chlorobiphenyls.