Spatial and temporal assessment of cadmium and chromium contamination in soils in the Karditsa region (Central Greece)

Environmental Science and Pollution Research - In this work, we aimed at monitoring Cd and Cr levels in surface soils in the Karditsa region (Central Greece). Soil samples were obtained throughout...     

Correction to: Biosolids application affects the competitive sorption and lability of cadmium,copper, nickel,lead, and zinc in fluvial and calcareous soils

Environmental Geochemistry and Health - Unfortunately, in the original publication of the article, Prof. Yong Sik Ok’s affiliation was incorrectly published.     

Single-element and competitive metal mobility measured with column infiltration and batch tests

The distribution coefficient, Kd, is often used to quantify heavy metal mobility in soils. Batch sorption or column infiltration tests may be used to measure Kd. The latter are closer to natural soil conditions, but are difficult to conduct in clays. This difficulty can be overcome by using a laboratory centrifuge. An acceleration of 2600 gravities was applied to columns of London Clay, an Eocene clay sub-stratum, and Cu, Ni, and Zn mobility was measured in centrifuge infiltration tests, both as single elements and in dual competition. Single-element Kd values were also obtained from batch sorption tests, and the results from the two techniques were compared. It was found that Kd values obtained by batch tests vary considerably depending on the metal concentration, while infiltration tests provided a single Kd value for each metal. This was typically in the lower end of the range of the batch test Kd values. For both tests, the order of mobility was Ni>Zn>Cu. Metals became more mobile in competition than when in single-element systems: Ni Kd decreased 3.3 times and Zn Kd 3.4 times when they competed with Cu, while Cu decreased only 1.2 times when in competition with either Ni or Zn. Our study showed that competitive sorption between metals increases the mobility of those metals less strongly bound more than it increases the mobility of more strongly bound metals.     

Remote Sensing and GIS Techniques for Selecting a Sustainable Scenario for Lake Koronia,Greece

During recent decades, Lake Koronia has undergone severe degradation as a result of human activities around the lake and throughout the basin. Surface and groundwater abstraction and pollution from agricultural, industrial, and municipal sources are the major sources of degradation. Planning a restoration project was hampered by lack of sufficient data, with gaps evident in both spatial and temporal dimensions. This study emphasized various remote sensing and geographic information system techniques, such as digital image processing and geographic overlay, to fill gaps using satellite imagery and other spatial environmental, hydrological, and hydrogeological data in the process of planning the restoration of Lake Koronia, following Ramsar guidelines. Current and historical remote sensing data were used to assess the current status and level of degradation, set constraints and define the ideotype for the restoration, and, finally, define and select the best restoration scenario.     

Weed mapping in cotton using ground-based sensors and GIS

Site-specific weed management presupposes the careful monitoring and mapping of weed infestation areas. Cut-edge sensor technologies coupled with geographical information systems (GIS) provide the means for reliable decision-making concerning weed management even in sub-field level. In present research, two different spectral sensing systems were engaged in order to digitally map weed patches as grown in four different cotton fields in Central Greece. The systems used were a set of two Crop Circle multispectral sensors ACS-430 and a digital camera Nikon D300S. The spaces between cotton rows were scanned and photographed with the two systems accordingly. Raw recorded data were stored and analyzed in GIS environment producing spatially interpolated maps of red-edge normalized difference vegetation index (NDVI) and weed cover percentage values. Both mapping approaches were satisfactorily related to weed distribution as occurred in the fields; however, the photographic method tended to underestimate weed populations. Correlation of red-edge NDVI and weed cover values, at the points where photographs were taken, as revealed by Pearson’s correlation coefficient was high (r?>?0.83) and statistically significant at the 0.01 level. A first-degree linear equation adequately modeled (R²?>?0.7) the between value pair relations, strengthening the validity of the two methodologies in spatially monitoring weed patches. The methodologies and the technologies used in the study can be used for yearly mapping weed flora in cotton cultivation and potentially constitute a means of rationalizing herbicide application in terms of doses and spatio-temporal decision-making.     

A review for chromium removal by carbon nanotubes

Water pollution is still a serious problem for the entire world. Adsorption technology is a promising process which is based on the fabrication of novel, cheap, non-dangerous and highly sorptive materials for application in wastewater purification processes. Nanomaterials are functional groups which find use in many important fields such as medicine, food processing and agriculture. This review collects information from published works about the use of carbon nanotubes as efficient and promising adsorbents in chromium removal from (real or synthesised) wastewater. For this purpose, isotherm (Langmuir, Freundlich, etc.), kinetic (pseudo-first-, second-order, etc.), thermodynamic (free-energy Gibbs, enthalpy, entropy) and desorption–regeneration studies were discussed in detail. Moreover, significant factors such as pH, agitation time, temperature, adsorbent dosage and initial dye concentration are also reported extensively. The maximum monolayer adsorption capacities of Cr(III) and Cr(VI) ions were 0.39–238.09 and 1.26–370.3?mg/g, respectively. The absolute values of ΔG⁰ and ΔH⁰ ranged 0.237–48.62 and 0.16–58.43?kJ/mol, respectively.     

Experimental analysis of flow and turbulence in the wake of neighboring emergent vegetation patches with different densities

Environmental Fluid Mechanics - Patches of vegetation in natural water bodies grow close to each other and may affect each other’s wake pattern with significant implications on nutrient...     

Bioavailability and health risk assessment of potentially toxic elements in Thriasio Plain,near Athens,Greece

Elevated concentrations of potentially toxic elements (PTEs) are usually found in areas of intense industrial activity. Thriasio Plain is a plain near Athens, Greece, where most of the heavy industry of the country has been situated for decades, but it also is a residential and horticultural area. We aimed at measuring the levels of PTEs in soils and indigenous plant species and assessing the health risk associated with direct soil ingestion. Samples of soils at roadsides and growing plants were collected from 31 sites of that area. Concentrations of Al, As, Cd, Co, Cr, Cu, Fe, Mn, Mo, Ni, Pb, V and Zn were measured in both soils (as pseudo-total) and aerial plant tissues. We found that As, Cd, Cr, Cu, Ni, Pb and Zn were higher than maximum regulatory limits. Element concentrations in plants were rather lower than expected, probably because indigenous plants have developed excluder behaviour over time. Copper and Zn soil-to-plant coefficients were highest among the other elements; for Cu this was unexpected, and probably associated with recent Cu-releasing industrial activity. Risk assessment analysis indicated that As was the element contributing more than 50 % of the health risk related to direct soil ingestion, followed by Cr, Pb, and, surprisingly, Mn. We concluded that in a multi-element contamination situation, elevated risk of PTEs (such as As, Cr and Pb) may reduce the tolerance limits of exposure to less-toxic elements (here, Mn).     

Biosolids application affects the competitive sorption and lability of cadmium,copper, nickel,lead, and zinc in fluvial and calcareous soils

The objective of this research was to investigate the effects of biosolids on the competitive sorption and lability of the sorbed Cd, Cu, Ni, Pb, and Zn in fluvial and calcareous soils. Competitive sorption isotherms were developed, and the lability of these metals was estimated by DTPA extraction following their sorption. Sorption of all metals was higher in the fluvial than in the calcareous soil. Sorption of Cu and Pb was stronger than that of Cd, Ni, and Zn in all soils. Biosolids application (2.5%) reduced the sorption of all metals especially Cu and Pb (28–43%) in both soils (especially the calcareous soil) at the lower added metal concentrations (50 and 100 mg L^?1). However, it increased the sorption of all metals especially Pb and Cu in both soils (especially the calcareous soil; 15.5-fold for Cu) at the higher added concentrations (250 and 300 mg L^?1). Nickel showed the highest lability followed by Cd, Zn, and Pb in both soils. Biosolids increased the lability of the sorbed Ni in the fluvial soils at all added concentrations and the lability of Cd, Pb, and Zn at 50 mg L^?1, but decreased the lability of Cd, Pb, and Zn at 250 and 300 mg L^?1 in both soils. We conclude that at low loading rate (e.g., 50 mg L^?1) biosolids treatment might increase the lability and environmental risk of Cd, Cu, Pb, and Zn. However, at high loading rate (e.g., 300 mg L^?1) biosolids may be used as an immobilizing agent for Cd, Cu, Pb, Zn and mobilizing agent for Ni.     

Experimental investigation of channel flow through idealized isolated tree-like vegetation

Environmental Fluid Mechanics - Riparian and floodplain tree-like emergent vegetation alter significantly the flow field and lead to complicated three-dimensional flow patterns, characterized by...