Overview of Environmental Hazards and Health Effects of Pollution in Developing Countries: A Case Study of Nigeria

Pollution has taken on a global dimension, and the effects are most obvious in developing countries. The effects take a toll on human health, animals, and vegetation, as well as on soil, air, and water quality. The objective of this article is to discuss the current relationships among pollution, environmental quality, and human health within the frame of anthropogenic activities in developing countries. In addition to personal observations, we review relevant literature on conditions throughout the developing world and case studies on conditions and activities in Nigeria. Key findings show the significant, adverse contributions to human health and environmental risk from current waste generation and handling practices, indoor and outdoor air pollution, wastewater and effluent generation and disposal, the hazardous nature and pollution potential of wastes, and the human behaviors that contribute to pollution in developing countries. There is an urgent need to create awareness among the various segments of society of the human health hazards posed by pollution as well as a need for the comprehensive development and enforcement of appropriate policies to prevent a descent into an abyss of deteriorating human and environmental health.     

Composition and management of rechargeable electric torch wastes in Ibadan,Nigeria

The consumption, disposal, material and chemical compositions of rechargeable electric torch wastes (RETWs) were investigated in Ibadan, Nigeria. Twenty-five RETWs of ten models were collected and disassembled. Their battery electrodes (BEs) and printed circuit boards (PCBs) were acid digested and leached using United States Environmental Protection Agency (USEPA) method 3050B and USEPA Method 1311, respectively. The digests and extracts were analysed for total and extractable Pb, Cd, Cr and Ni using atomic absorption spectrophotometer. The US Test method (CPSC-CH-E 1002-08) was used for digestion of the plastic components. Two hundred questionnaires were distributed to users in Ibadan to determine their usage of RETs and their management when spent. The results indicated that BEs contributed the highest percentage (44 %) component, followed by plastic (38 %). Other components include metal, PCBs, glass and wire. Of the respondents, 61.9 % dispose their spent torches in dumpsites. The mean ± SD concentrations of Pb, Cd, Cr and Ni in the BEs were 500 ± 109 g/kg, 3.94 ± 6.84 mg/kg, 0.33 ± 0.88 mg/kg, 1.68 ± 0.74 mg/kg respectively; in the PCBs, they were 684 ± 42 g/kg, 13.7 ± 17.8 mg/kg, 13.5 ± 10.2 mg/kg and 193 ± 437 mg/kg; and in the plastics, they were 14.1 g/kg, 5.33 mg/kg, 17 mg/kg, and 4.67 mg/kg respectively. The extractable Pb in BE (2670 mg/L) and PCBs (235 mg/L) exceeded the Toxicity Characteristics Leaching Procedure (TCLP) limit of 5 mg/L. RETWs present potential environmental problems in the absence of effective recycling.     

Current Levels and Management of Solid Wastes in Nigeria

Solid waste is of serious concern in developing countries because of its high rate of generation and the low‐end quality of its management. Inefficient handling of solid wastes may result in deterioration of environmental quality, but it can also result in loss of potential resources. This study reviews current solid waste generation and management in Nigeria and the need for an effective collection, recovery, and recycling policy. Our review is based on literature searches and personal field surveys. Observations showed that uncontrolled electronic waste (e‐waste), agricultural‐waste (agro‐waste), scrap metals, waste polymers, and waste from the transportation sector are prevalent in Nigeria. Recent collection rates were less than 50% of the total solid waste generated (i.e., approximately 40% was collected). With an effective collection system and appropriate policies, the abundance of solid waste in the country could present material recovery and recycling opportunities that would boost the economy and move Nigeria closer to sustainable resource management.     

Monitoring of soil and groundwater contamination following a pipeline explosion and petroleum product spillage in Ijegun, Lagos Nigeria

In May 2008, an accidental damage of a Nigerian National Petroleum Corporation (NNPC) pipeline occurred in Ijegun area of Lagos, Nigeria, resulting in oil spillage and consequent contamination of the environment. The residual concentration of the total hydrocarbon (THC) and benzene, toluene, ethylbenzene, and xylene (BTEX) in the groundwater and soil was therefore investigated between March 2009 and July 2010. Results showed elevated THC mean levels in groundwater which were above the World Health Organization maximum admissible value of 0.1 mg/l. THC values as high as 757.97 mg/l in groundwater and 402.52 mg/l in soil were observed in March 2009. Pronounced seasonal variation in the concentration of THC in groundwater and soil samples show that there was significant (P?<?0.05) difference in the measured concentration of THC between each season (dry and wet), with the highest being in the dry season and between the years 2009 and 2010. Significant hydrocarbon contamination, 500 m beyond the explosion site and 25 months after the incident, was observed revealing the extent of the spillage of petroleum products. The highest concentrations of 16.65 μg/l (benzene), 2.08 μg/l (toluene), and 4864.79 μg/l (xylene) were found in stations within the 100 m buffer zone. Most of the samples of groundwater taken were above the target value of 0.2 μg/l set for BTEX compounds by the Environmental Guidelines and Standards for Petroleum Industry in Nigeria. The level of hydrocarbon in the impacted area calls for concern and remediation of the area is urgently needed to reduce further negative impact on the ecosystem.     

Relevance of joint action toxicity evaluations in setting realistic environmental safe limits of heavy metals

The evaluation of types of toxicological interactions existing between heavy metals, which are prominent in effluents of some industrial establishments in Lagos State, Nigeria and the Lagos lagoon sediment was carried out against benthic animals, Tympanotonus fuscatus, Clibanarius africanus and Sesarma huzardi of the Lagos lagoon. In order to determine the type of interactions existing between the metals, acute toxicity tests of the metal compounds when acting singly and in joint action studies, by adopting mixture ratios that depict (i) the proportions of the concentrations of the metal ions in the sediment of the Lagos lagoon and (ii) equitoxic mixtures, i.e. based on the 96 hLC(50) values of the metal compounds under single action studies were carried out in laboratory biotests. The joint action evaluations of the test metal mixtures, prepared on the basis of the proportion of the availability of the metals ions in lagoon sediment and equitoxic ratio against the test animals agreed mainly with the model of antagonism (reduction in toxicity) except for test mixtures prepared on the basis of equitoxic ratio and tested against T. fuscatus, where interactions between the test metals was in conformity with the model of synergism, indicating that the toxicity of the constituent metals in the mixture was enhanced. Furthermore, on the basis of classification of synergistic ratio model, the toxic effect of Pb compound which was the least toxic metal compound in the single action toxicity studies was found to be enhanced (synergised) in the presence of other metals when tested jointly. The significance of the results in setting water quality criteria aimed at protecting aquatic biota was discussed.     

Sound management of brominated flame retarded (BFR) plastics from electronic wastes: State of the art and options in Nigeria

Management of flame retarded plastics from waste electrical and electronic equipment (WEEE) has been posing a major challenge to waste management experts because of the potential environmental contamination issues especially the formation of polybrominated-dioxins and -furans (PBDD/F) during processing. In Nigeria, large quantities of electronic waste (e-waste) are currently being managed—a significant quantity of which is imported illegally as secondhand electronics. As much as 75% of these illegal imports are never reused but are rather discarded. These waste electronic devices are mostly older equipment that contains brominated flame retardants (BFRs) such as penta-brominated diphenyl ethers (PBDEs), and polybrominated biphenyls (PBBs) which are presently banned in Europe under the EU WEEE and RoHS Directives. Risk assessment studies found both to be persistent, bio-accumulative and toxic. The present management practices for waste plastics from WEEE in Nigeria, such as open burning and disposal at open dumps, creates potential for serious environmental pollution. This paper reviews the options in the environmentally sound management of waste plastics from electronic wastes. Options available include mechanical recycling, reprocessing into chemicals (chemical feedstock recycling) and energy recovery. The Creasolv^® and Centrevap^® processes, which are the outcome of the extensive research at achieving sound management of waste plastics from WEEE in Europe, are also reviewed. These are solvent-based methods of removing BFRs and they presently offer the best commercial and environmental option in the sound management of waste BFR-containing plastics. Because these developments have not been commercialized, WEEE and WEEE plastics are still being exported to developing countries. The industrial application of these processes and the development of eco-friendlier alternative flame retardants will help assure sound management of WEEE plastics.     

High boron removal by functionalized magnesium ferrite nanopowders

Hydroxyl-enriched materials are promising boron adsorbents. However, the use of these materials is hampered by issues of separation, recovery, and selectivity, notably due to the presence of interfering ions. Therefore, we synthesized here a cheap magnetic nanopowder, which was further functionalized with polyvinyl alcohol and glycidol to produce boron-selective adsorbents. We studied their selectivity and removal efficiency using batch and fixed-bed systems. Sorption was studied at both concentrated and trace amounts of boron. Results show that nanopowders have 5.3–6.5 nm pore sizes and 145–203 m²/g surface areas, using Brunauer–Emmett–Teller analysis. Polyvinyl alcohol-functionalized particles removed 93 % of boron at 5 mg/L at pH 7 in 30 min, whereas only 68 % of boron was removed by glycidol-functionalized particles. However, at higher boron concentration, of 50 mg/L, glycidol-functionalized particles showed higher adsorption affinity of 68.9 mg/g. We conclude that internal hydroxyl groups of polyvinyl alcohol-functionalized particles are less accessible at higher boron concentration. This is the first report on magnesium ferrites for boron recovery. The spent adsorbents were separated easily from the aqueous media by an external magnet and repeatedly used. Overall, our findings demonstrated that the hydroxyl-enriched magnetic nanopowders are a better alternative to the existing boron adsorbents regarding magnetic separation, reusability, and selectivity.     

Accumulation of lead and cadmium by four tropical forage weeds found in the premises of an automobile battery manufacturing company in Nigeria

The potentials of tropical weeds namely, Nephrolepis biserrata, Panicum maximum, Eleusine indica, and Chromolaena odorata to accumulate lead (Pb) and cadmium (Cd) from soil within the premises of an automobile battery manufacturing company in Ota, south-western Nigeria, were explored. The weed samples were collected in both wet and dry seasons. Standard analytical methods were employed to collect, digest, and analyze the weeds. Lead levels in the weeds for both seasons ranged from 1990–4870, 1090–1730, 4800–7890, and 400–1210 µg g^?1 dry weight (DW) for Nephrolepis biserata, Panicum maximum, Eleusine indica, and Chromolaena odorata, respectively, while the cadmium level in the weeds for both seasons ranged from 3.92–6.78 µg g^?1 DW for N. biserata, 1.99–6.85 µg g^?1 DW for P. maximum, 2.90–7.40 µg g^?1 DW for E. indica, and 2.90–5.09 µg g^?1 DW for C. odorata. There was no significant difference in the accumulation of both Pb and Cd for the two seasons. All the weeds showed Pb levels higher than the phytotoxic range. On the contrary, 99% of the weeds showed Cd concentration within the phytotoxic range. The weeds demonstrate good phytoremediation potentials of contaminated soil.     

Metal levels in computer monitor components discarded in the vicinities of electronic workshops

Levels of Pb, Ni, Cr, Cu, Zn, and Cd in the glass screens (GS) and printed wiring boards (PWBs) of obsolete computer monitors (OCMs) were determined by flame atomic absorption spectrophotometry (FAAS) following standard digestion. Metal concentrations (mg kg^?1) in GS were in the following ranges (medians in brackets): Pb ND – 3100 (46), Cd 0.5–2.6 (0.8), Cr ND – 18.7 (3.1), and Zn 8.1–600 (37) and in PWBs (mg kg^?1): Pb 34,600 ± 17,000, Cd 11 ± 9, Cr 59 ± 45, Zn 15,900 ± 7800, Cu79,000 ± 22,600, and Ni 3200 ± 2500. In GS, the levels of the six metals were lower than their total threshold limit concentrations (TTLC), except for Pb with a TTLC of 1000 mg kg^?1 in 10% of the samples. In the PWBs, the TTLC of Pb and Cu (2500 mg kg^?1) was exceeded many fold. For Zn (5000 mg kg^?1) and Ni (2000 mg kg^?1); they were exceeded by 90% and 65%, respectively. For OCMs manufactured in 2001 and later, Pb and Zn levels in GS and Cr, Zn, and Ni in PWBs were significantly reduced.