Recycling polymeric waste from electronic and automotive sectors into value added products

The environmentally sustainable disposal and recycling of ever increasing volumes of electronic waste has become a global waste management issue. The addition of up to 25% polymeric waste PCBs (printed circuit boards) as fillers in polypropylene (PP) composites was partially successful: while the tensile modulus, flexural strength and flexural modulus of composites were enhanced, the tensile and impact strengths were found to decrease. As a lowering of impact strength can significantly limit the application of PP based composites, it is necessary to incorporate impact modifying polymers such as rubbery particles in the mix. We report on a novel investigation on the simultaneous utilization of electronic and automotive rubber waste as fillers in PP composites. These composites were prepared by using 25 wt.% polymeric PCB powder, up to 9% of ethylene propylene rubber (EPR), and PP: balance. The influence of EPR on the structural, thermal, mechanical and rheological properties of PP/PCB/ EPR composites was investigated. While the addition of EPR caused the nucleation of the β crystalline phase of PP, the onset temperature for thermal degradation was found to decrease by 8%. The tensile modulus and strength decreased by 16% and 19%, respectively; and the elongation at break increased by ~71%. The impact strength showed a maximum increase of ~18% at 7 wt.%–9 wt.% EPR content. Various rheological properties were found to be well within the range of processing limits. This novel eco-friendly approach could help utilize significant amounts of polymeric electronic and automotive waste for fabricating valuable polymer composites.

Open image in new window

     

Adsorptive removal of Cd2+ ions using dolochar at an industrial-scale process optimization by response surface methodology

Environmental Science and Pollution Research - In this work, performance of laboratory-synthesized dolochar has been investigated for adsorption of Cd2+ ions in a large-scale process with the...     

Emerging trends in photodegradation of petrochemical wastes: a review

Various human activities like mining and extraction of mineral oils have been used for the modernization of society and well-beings. However, the by-products such as petrochemical wastes generated from such industries are carcinogenic and toxic, which had increased environmental pollution and risks to human health several folds. Various methods such as physical, chemical and biological methods have been used to degrade these pollutants from wastewater. Advance oxidation processes (AOPs) are evolving techniques for efficient sequestration of chemically stable and less biodegradable organic pollutants. In the present review, photocatalytic degradation of petrochemical wastes containing monoaromatic and poly-aromatic hydrocarbons has been studied using various heterogeneous photocatalysts (such as TiO₂, ZnO and CdS. The present article seeks to offer a scientific and technical overview of the current trend in the use of the photocatalyst for remediation and degradation of petrochemical waste depending upon the recent advances in photodegradation of petrochemical research using bibliometric analysis. We further outlined the effect of various heterogeneous catalysts and their ecotoxicity, various degradation pathways of petrochemical wastes, the key regulatory parameters and the reactors used. A critical analysis of the available literature revealed that TiO₂ is widely reported in the degradation processes along with other semiconductors/nanomaterials in visible and UV light irradiation. Further, various degradation studies have been carried out at laboratory scale in the presence of UV light. However, further elaborative research is needed for successful application of the laboratory scale techniques to pilot-scale operation and to develop environmental friendly catalysts which support the sustainable treatment technology with the “zero concept” of industrial wastewater. Nevertheless, there is a need to develop more effective methods which consume less energy and are more efficient in pilot scale for the demineralization of pollutant.     

Insecticidal activity of the plant Phyllanthus amarus against Tribolium castaneum

The plant Phyllanthus amarus is used as folk medicine since the year 1800 and has been established for its important medicinal properties particularly for liver ailments. The present communication explores the insecticidal activity of ethanolic extract of aerial and root parts of this plant against stored grain pest Tribolium castaneum. LC 50 values of ethanolic aerial part were 895.77, 473.91, 279.89 and 260.85 microg/cm2, while 512.62, 376.96, 248.88 and 209.79 microg/cm2 for ethanolic root part at the exposure of 3, 5, 7, 9 and 11 days respectively. Ethanolic root extract possessed significant insecticidal activity against T. castaneum.     

Transport of metanil yellow in the rat plasma and interaction of its metabolite,p‐aminodiphenylamine with serum proteins

Binding affinity of metanil yellow and its breakdown product p‐aminodiphenylamine to serum proteins has been studied employing chromatographic separation on Sephadex G‐200 and by paper and polyacrylamide gel electrophoresis. Metanil yellow has more affinity towards albumin than to globulins. The complexing is presumably through electrostatic forces. p‐Aminodiphenylamine on the other hand, preferably binds to globulin fractions of serum protein. However, a stable binding with BSA alone was also observed. The binding was quite stable and was accompanied by a shift in absorbance from 430 nm to 500 nm. Aspartic acid moiety of protein was found to be one of the units involved in the binding of p‐ADPA to proteins.     

Effect of endosulfan on blood glucose

Endosulfan was administered to cats intravenously at different doses. The compound (3 and 4 mg/kg) showed marked rise in blood glucose level after 15 and 30 minutes of treatment with a gradual fall upto 4 hrs. No change in blood glucose was observed at 2.0 mg/kg dose. Adrenalectomy prevented this rise in glucose level.