A comparison of mesh-adaptive LES with wind tunnel data for flow past buildings: Mean flows and velocity fluctuations

In this paper we address two important aspects of micro-scale urban airflow model evaluation: (a) the identification of key flow features as dictated by the physics of the problem and as captured by the simulations, and (b) the comparison of important model output parameters (mean flows and fluctuations) with experimental data. A series of mesh-adaptive large eddy simulations (LES) was carried out for the study of air flows within two intersecting street canyons with varying building configurations. The novelty of the approach lies in the combination of LES with mesh adaptivity, which allows a variable-filter length and the implementation of an anisotropic eddy-viscosity model. Both coarse and fine-mesh simulations were carried out, using single and parallel-processor systems respectively. The simulations showed clearly that the expected flow patterns such as the street canyon recirculation and the street-mouth vortices, as well as the exchange of air flow at the street intersections, can readily be captured by the mesh-adaptive LES.In addition, the detailed comparisons of mean flows and fluctuations of the resolved velocity field with the measured data showed that the simulation results agreed well with the patterns and trends of the wind tunnel measurements. In most cases the finer-mesh simulations improved considerably the accuracy of the mean flows, especially for the symmetrical configuration. The improvement in the predicted fluctuations was less obvious, with several detector locations underpredicting the measured values, although the overall comparison was also satisfactory. The typical errors for the mean flows for all three building configurations were less than 30%, whilst for the velocity fluctuations less that 40%. Both the simulated means flows and turbulence levels were generally more accurate in the streets parallel to the wind (streamwise direction) than in the streets normal to the wind.     

Hematology and Some Biochemical Parameters of Wild Rodents in Pistachio Gardens of Kerman Province, Southeast Iran

Wild rodents were collected using live snap traps in pistachio gardens of Kerman Province, Southeast Iran from 2007 to 2009, then some physiological parameters of them were measured. The samples were identified as follow: Nesokia indica, Meriones persicus, Meriones lybicus and Tatera indica. Blood samples were obtained from the heart, then the blood parameters (glucose, cholesterol, triglyceride, total protein, HDL, red and white blood cell number) in wild species of rodents and laboratory rat were compared. The results showed that there were no significant differences in serum glucose, triglyceride, HDL and total protein levels among different experimental groups. The concentration of cholesterol in T. indica was more than that in N. indica (P < 0.01). The total numbers of red blood cells also showed significant difference between wild garden rodent species and laboratory rat (P < 0.01), while the numbers of white blood cells showed no significant difference.     

Ammonia emission, deposition and impact assessment at the field scale: a case study of sub-grid spatial variability

A local ammonia (NH3) inventory for a 5x5 km area in central England was developed, to investigate the variability of emissions, deposition and impacts of NH3 at a field scale, as well as to assess the validity of the UK 5-km grid inventory. Input data were available for the study area for 1993 and 1996 on a field by field basis, allowing NH3 emissions to be calculated for each individual field, separately for livestock grazing, livestock housing and manure storage, landspreading of manures and fertiliser N application to crops and grassland. An existing atmospheric transport model was modified and applied to model air concentrations and deposition of NH3 at a fine spatial resolution (50 m grid). From the mapped deposition estimates and land cover information, critical loads and exceedances were derived. to study the implications of local variability for regional NH3 impacts assessments. The results show that the most extreme local variability in NH3 emissions, deposition and impacts is linked to housing and storage losses. However, landspreading of manures and intensive cattle grazing are other important area sources, which vary substantially in the landscape. Overall, the range of predicted emissions from agricultural land within the study area is 0-2000 kg N ha(-1) year(-1) in 1993 and 0-8000 kg N ha(-1) year(-1) in 1996, respectively, with the peak at a poultry farm located in the study area. On average, the estimated field level NH3 emissions over the study area closely match the emission for the equivalent 5-km grid square in the national inventory for 1996. Deposition and expected impacts are highly spatially variable, with the edges of woodland and small "islands" of semi-natural vegetation in intensive agricultural areas being most at risk from enhanced deposition. Conversely the centres of larger nature reserves receive less deposition than average. As a consequence of this local variability it is concluded that national assessments at the 5 km grid level underestimate the occurrence of critical loads exceedances due to NH3 in agricultural landscapes.     

Validity and uncertainty in the calculation of an emission inventory for ammonia arising from agriculture in Great Britain

Emissions of ammonia have received increasing attention recently, following concern about the environmental consequences, especially in The Netherlands where levels are high due to intensive livestock farming. Direct local effects and more widespread consequences for a range of ecosystems have been attributed to ammonia emissions. As the most prevalent alkaline gas in the atmosphere, ammonia interacts with acidic species, changing their characteristics, chemical and physical behaviour, and enhancing their potential for acidification of soils. Ammonia also forms an important component of the nitrogen cycle and of nitrogen deposition. In the UK, as in many other European countries, there has been a considerable increase in the emission of ammonia within the last 30 years, estimated at about 50%. This results mainly from increases in agricultural production based on the steadily rising number of livestock and increasing fertilizer consumption. This paper discusses the various sources to emissions of ammonia from agricultural sources in the United Kingdom, and some of the uncertainties involved in constructing a national emissions inventory.     

The role of secondary particulates in European emission abatement strategies

Economic assessments have indicated that the greatest benefits of reducing atmospheric emissions of sulphur and nitrogen compounds in Europe come from the resulting reductions in secondary particulate concentrations. For comparison with abatement strategies devised to reduce exceedance of critical loads for acidification, this paper, therefore, considers optimisation of emission abatement strategies to reduce secondary particulate concentrations and minimise human exposure. It is seen that this changes the relative emphasis between some countries in reducing their emissions, and also places less importance on emissions of ammonia from agriculture relative to those of SO₂ and NO_x. The effect of placing emphasis on improvement in the more highly polluted areas of Europe is also examined by imposing a threshold. The benefits of the strategies in terms of ecosystem protection and human exposure to particulates are presented for all scenarios studied. The scenarios are also interpreted in terms of a blame matrix for human exposure to secondary particulates.     

Use of dimethyl sulfoxide as solubilization agent in the detection of 2,3,7,8-TCDD by radioimmunoassay

Immunoassays are potentially valuable tools for use in screening environmental samples for a broad range of contaminants, such as polychlorinated dibenzo-p-dioxins (PCDDs). The performance of the radioimmunoassay (RIA) for PCDDs was characterized using 4 solubilization systems: Cutscum, Triton, horse serum, and dimethyl sulfoxide (DMSO). The DMSO based assay appeared to perform best at low 2,3,7,8-TCDD levels. The effects of assay incubation time and hapten storage conditions on the DMSO based assay were assessed. The separation of bound from unbound radioactivity was accelerated without adversely affecting assay performance. Further assay development through the use of an alternative labelled hapten is considered.     

Integrated Assessment of Abatement Strategies to Improve Air Quality in Urban Environments, the USIAM Model

Planning effective strategies to combat air pollution in amajor city such as London requires integration ofinformation on atmospheric concentrations and where theyexceed prescribed air quality standards, detailed data onemissions and potential measures to reduce them includingcosts, and a good understanding of the relativecontributions of different emission sources to pollutantconcentrations plus the remaining background. The UrbanScale Integrated Assessment Model (USIAM) is designed as atool to integrate such information, and to explore andassess a variety of potential strategies for improving airquality. It is based on the same principles as theAbatement Strategies Assessment Model (ASAM) that has beenused in the UN Economic Commission for Europe. To startwith the USIAM model is being developed with respect to theparticulate PM₁₀ only, and in particular the primaryparticulate contribution. The secondary particulate istreated as part of the background superimposed on theprimary particulate concentrations; this may need to betreated more specifically at a later stage, particularlywith respect to nitrate formation over the city. The USIAMmodel therefore sets out to examine a selection of severeepisode conditions as well as long-term annual averageconcentrations, and aims to find strategies that aresuccessful in eliminating exceedance of the prescribedtarget concentrations. By ranking different options forabatement of emissions, for example in terms of cost orease of implementation, the USIAM model can also select andprioritise different potential strategies.     

The potential for spatial planning at the landscape level to mitigate the effects of atmospheric ammonia deposition

Ammonia (NH₃) is emitted mainly from agricultural practices, with NH₃ concentrations decreasing rapidly away from sources. As a consequence there is a high spatial variability in nitrogen deposition and its consequent ecological effects in agricultural landscapes that is in addition to differences in sensitivity between habitat types. This variability points to the potential to include spatial planning measures as part of strategies to protect sensitive vegetation from ammonia deposition.National abatement policies typically include uniform recommendations for technical abatement measures, such as ploughing in manures after land spreading. In this study, the complementary potential of spatial planning to reduce effects on target locations is analysed through model scenarios for an example landscape in central England. Scenarios included defining buffer zones of low-emission agriculture and establishing tree belts surrounding either emission sources or priority areas for the protection of semi-natural habitats.The analysis showed that tree belts can reduce deposition to sensitive areas, with trees surrounding the sensitive habitats being more effective than trees around the sources. Low emission buffer zones around sink areas also result in useful reductions in N deposition. Smaller nature reserve sites benefit to a greater degree from such spatial planning measures, as large reserves can provide their own buffer zone to some degree. Similarly, relocating point sources or using planning policies to ensure the location of large NH₃ point sources are at least 2–3 km from the sensitive habitats results in substantial reductions in N deposition.