The Effects of Infiltration and Insulation on the Source Strengths and Indoor Air Pollution from Combustion Space Heating Appliances

Many energy conservation strategies for residences involve reducing house air exchange rates. Reducing the air exchange rate of a house can cause an increase in pollutant levels if there is an indoor pollution source and if the indoor pollutant source strength remains constant. However, if the indoor pollutant source strength can also be reduced, then it is possible to maintain or even improve indoor air quality. Increasing the insulation level of a house is a means of achieving energy conservation goals and, in addition, can reduce the need for space heating and thereby reduce the pollutant source strengths of combustion space heaters such as unvented kerosene space heaters, unvented gas space heaters, and wood stoves. In this paper, the indoor air quality trade-off between reduced infiltration and increased insulation in residences is investigated for combustion space heaters. Two similar residences were used for the experiment. One residence was used as a control and the other residence had infiltration and insulation levels modified. An unvented propane space heater was used as the source in this study. A model was developed to describe the dependence of both indoor air pollution levels and the appliance source strengths on house air exchange rates and house insulation levels. Model parameters were estimated by applying regression techniques to the data. Results show that indoor air pollution levels in houses with indoor combustion space heating pollution sources can be held constant (or lowered) by reducing the thermal conductance by an amount proportional to (or greater than) the reduction of the air exchange rate.     

In vitro genotoxicity of fly ash leachate in earthworm coelomocytes

Fly ash is the major coal combustion byproduct from thermal power plants. Considering its plant–nourishing constituents, its soil amendment in farmland is one of its promoted disposal methods. A substantial amount of heavy metals present in fly ash, which may leach out due to rainwater or irrigation water, may cause serious problem with long term use, especially to soil organisms. These metals may cause DNA damage through Reactive Oxygen Species (ROS) generation. In the present study, single cell gel electrophoresis [(SCGE) i.e., comet assay] was used to detect DNA damage in earthworm (Dichogaster curgensis) coelomocytes, following an in vitro exposure. Significant DNA damage was observed at the lowest concentration of fly ash leachate (6.25%) examined. DNA damage by all the tested concentrations (6.25%, 12.5%, 25%, 50%) differed significantly (p?<?0.001) from that of the negative control. Hence, long-term application of fly ash might prove harmful for earthworm populations.     

Hardness corrections for copper are inappropriate for protecting sensitive freshwater biota

Toxicity testing using a freshwater alga (Chlorella sp.), a bacterium (Erwinnia sp.) and a cladoceran (Ceriodaphnia cf. dubia) exposed to copper in synthetic and natural freshwaters of varying hardness (44-375 mg CaCO3/l), with constant alkalinity, pH and dissolved organic carbon concentration, demonstrated negligible hardness effects in the pH range 6.1-7.8. Therefore, the use of a generic hardness-correction algorithm, developed as part of national water quality guidelines for protecting freshwater biota, is not recommended for assessing the toxicity of copper to these, and other, sensitive freshwater species. Use of the algorithm for these sensitive species will be underprotective because the calculated concentrations of copper in water that cause a toxic effect will be higher.     

Effect of temperature and humidity on formaldehyde emissions in temporary housing units

The effect of temperature and humidity on formaldehyde emissions from samples collected from temporary housing units (THUs) was studied. The THUs were supplied by the U.S. Federal Emergency Management Administration (FEMA) to families that lost their homes in Louisiana and Mississippi during the Hurricane Katrina and Rita disasters. On the basis of a previous study, four of the composite wood surface materials that dominated contributions to indoor formaldehyde were selected to analyze the effects of temperature and humidity on the emission factors. Humidity equilibration experiments were carried out on two of the samples to determine how long the samples take to equilibrate with the surrounding environmental conditions. Small chamber experiments were then conducted to measure emission factors for the four surface materials at various temperature and humidity conditions. The samples were analyzed for formaldehyde via high-performance liquid chromatography. The experiments showed that increases in temperature or humidity contributed to an increase in emission factors. A linear regression model was built using the natural log of the percent relative humidity (RH) and inverse of temperature (in K) as independent variables and the natural log of emission factors as the dependent variable. The coefficients for the inverse of temperature and log RH with log emission factor were found to be statistically significant for all of the samples at the 95% confidence level. This study should assist in retrospectively estimating indoor formaldehyde exposure of occupants of THUs.