Prevalence of chromosomal aberrations in Argentinean agricultural workers

Environmental Science and Pollution Research - Little is known about biosecurity measures and toxic effects during pesticide application in the province of Jujuy, Argentina, particularly concerning...     

Removal and degradation of aromatic compounds from a highly polluted site by coupling soil washing with photocatalysis

The possible application of two environmental remediation technologies - soil washing and photocatalysis - to remove and decompose various aromatic pollutants present in excavated soils of a contaminated industrial site has been investigated. Aqueous solutions containing the non-ionic surfactant Brij 35 were used to extract the contaminants from the soil samples. The photocatalytic treatment of the obtained washing wastes, performed in the presence of TiO(2) suspensions irradiated with simulated sunlight, showed a slow abatement of the toxic compounds due to the relevant concentrations of organics in the waste. A neat improvement of the process performances, obtained by operating in the presence of added potassium peroxydisulfate, suggests a feasible treatment route.     

Retention of arsenic on hydrous ferric oxides generated by electrochemical peroxidation

Electrochemical peroxidation (ECP), an emerging remediation technology, with direct electric current applied to steel electrode and small addition of H2O2, was used to remove As(III) from contaminated aqueous solutions. Bench scale experiments were conducted to evaluate the sorption and distribution of arsenic between the soluble and solid state hydrous ferric oxides (HFO) formed as part of the ECP process. ECP was effective in removing arsenic from the aqueous solution, with >98% of the applied As(III) adsorbed on HFO. Removal was complete within 3 min of ECP treatment and apparently independent of the initial pH of the water (3.5-9.5). In the absence of H2O2 more As(III) was adsorbed by solid state iron at pH 9.5 than at 3.5 (2600 vs. 1750 microg l(-1)). Thus H2O2 was crucial to oxidize As(III) to As(V) which is more strongly retained by HFO. Removal of As was not significantly affected by the concentration of H2O2 or by current processing time. The optimal operating conditions were pH < 6.5, H2O2 concentration of 10 mg l(-1) and current process time not exceeding 3 min. X-ray diffraction (XRD), diffuse-reflectance infrared Fourier transform (DRIFT) spectroscopy and transmission electron microscopy (TEM) were applied to study the HFO deposits. The XRD data indicated the prevalence of poorly ordered Fe minerals in the suspended ECP solids with a dominance of 5 line ferrihydrite in the absence of H2O2. At pH 3.5 and with 100 mg H2O2 l(-1), akaganeite was formed, whereas an incipient hematitic phase, reflection at 0.39 nm, occurred at pH 6.5. DRIFT data indicate that both As(III) and As(V) were specifically adsorbed onto HFO at acid and neutral pH. TEM observations indicated the presence of spherical shape ferrihydrite and provided evidence for possible formation of subrounded hematite and acicular shape goethite.     

Vacuum-ultraviolet (VUV) photolysis of water: Mineralization of atrazine

The versatility and efficiency of the VUV photolysis of water as an “Advanced Oxidation Procedure” for the light-induced oxidative degradation of atrazine as a pollutant of surface and ground waters is evaluated. The oxidation of atrazine using TiO₂ as a photocatalyst has been reported to produce almost stoichiometric amounts of cyanuric acid. Mineralization to CO₂, water and inorganic nitrogen containing ions occurred to a very low extent implying that cyanuric acid is resistant to further degradation under the chosen experimental conditions. Our present results show that in oxygen saturated solutions 50% of the initial atrazine is converted to cyanuric acid, whereas only 10% of the initial atrazine is isolated as cyanuric acid in argon saturated solutions. The results indicate that mineralization is more efficient in not strictly oxidative reaction media.     

Photocatalytic degradation of bentazone in soil washing wastes containing alkylpolyoxyethylene surfactants

Three alkylpolyoxyethylene surfactants bearing the same hydrophobic chain and a different number of oxyethylene groups were investigated as suitable candidates for the soil washing treatment of contaminated soil samples containing bentazone. Comparable good recoveries of the pesticide were obtained working with these surfactants. The photocatalytic treatment of the collected washing wastes, performed in the presence of suspended TiO₂ particles under irradiation with simulated sunlight, leads to the effective degradation of bentazone residues after a time depending on the nature and concentration of the chosen amphiphile. Brij 35 was found to be the best surfactant candidate, giving the faster abatement of the pesticide in the collected wastes. The overall treatment time depends on the bentazone mineralization kinetics, markedly slow in the presence of surfactants. Useful information about the photocatalytic degradation route was obtained from the HPLC-MS analysis of transient intermediates formed in water.     

Intermediate distributions and primary yields of phenolic products in nitrobenzene degradation by Fenton's reagent

Nitrobenzene thermal degradation was investigated using the Fenton reagent in different experimental conditions. Reaction products were analyzed by HPLC, GC-MS, LC-MS and IC. The products obtained at different nitrobenzene conversion degrees show that degradation mainly involves successive hydroxylation steps of the aromatic ring and its subsequent opening followed by oxidation of corresponding aliphatic compounds. Our results show as primary reaction products: 4-nitrophenol, 3-nitrophenol, 2-nitrophenol, phenol and 1,3-dinitrobenzene, indicating that both hydroxylation and nitration reactions are involved. The formation of phenolic products can be explained by postulating an initial step of HO() addition to nitrobenzene ring. The mechanisms of primary reaction pathways are discussed and a detailed kinetic analysis to obtain the true primary yields of phenolic products is proposed. The relative yields observed for nitrophenol isomers do not follow the expected orientation according to deactivating characteristics of the nitro group but significantly depend on Fe(+2), Fe(+3), H(2)O(2) and O(2) concentrations. The understanding of the effect of reaction conditions on the relative product distribution benefits the application of Fenton and Fenton-like systems to waste water treatment.     

Polychlorinated biphenyls in contaminated soil samples evaluated by GC-ECD with dual-column and GC-HRMS

We present and compare results obtained from the analysis of polychlorinated biphenyls (PCBs) of a limited number of contaminated soil samples collected in three areas of Basilicata region (south of Italy). The levels of PCBs were evaluated by using two analytical methods: (i) parallel dual-column gas-chromatography with dual electron capture detectors (GC-ECD) and (ii) gas-chromatography coupled to high-resolution mass spectrometry (GC-HRMS) via electron impact ionization (EI) in the multiple ion monitoring mode (MIM, two ions per compound). Two extraction methods prior to sample cleanup were also examined: microwave-assisted extraction (MAE) and ultrasonic-assisted extraction (UAE). The MAE was the extraction procedure adopted using acetone/n-hexane (1:1, v/v) as it is mainly characterized by higher sample throughput and allowed reduced consumption of organic solvents. While extraction and analysis of spiked soil samples showed the applicability of both methods, systematic differences between the results were obtained for the sum of PCBs as a result of some non-detected congeners by GC-ECD compared with GC-HRMS. Indeed, high resolution MS using EI mode (electron energy 40eV) with a resolving power of 10,000 provides additional information about the contamination pattern. The GC-ECD screening of 11 soil samples led to just one sample non-compliant to as it was close to the guide value for soils fixed by the Italian legislation (i.e., 60ppb for private or urban soil). Using GC-HRMS, the amount of all PCBs found ranged from 5.4 to 127ppb with five soil samples non-compliant to the guide value. The number of identified congeners ranged from 1 to 9 and 9 to 18 using dual-column GC-ECD and GC-HRMS, respectively.     

A model for intraguild predation dynamics between immature stages

Dynamical models usually assume that predation occurs between mature stages and/or between mature and immature stages. In this work a stage-structured discrete time model is developed for a system where intraguild predation takes place only in the course of immature stages of predator and its prey. Therefore, the proposed mathematical setup demands functional relations linking predation in immature life stages with survival and fecundity in mature stages. The behavior of the model is examined in order to investigate the interplay among predator attack rate, its satiation of prey consumption and the success of intraguild predator invasion.     

Lichen transplants as a suitable tool to identify mercury pollution from waste incinerators: a case study from NE Italy

A lichen transplant study aimed at investigating a strong increase in mercury concentrations in lichens was run in a territory of NE Italy where background values were very low only 8 years before. Thalli of the lichen Pseudevernia furfuracea collected in a pristine area were exposed for 1.5, 3 and 6 months at 31 sites selected according to the observed pattern of Hg concentrations, location of the suspected source (a new waste incinerator) and prevailing wind direction. Hg strongly increased at eight sites after 1.5 months, at 12 after 3 months and at 20 after 6 months. The highest values were always located SW and S of the incinerator, in good agreement with the prevailing night wind direction. It was concluded that, although the immediate risk for the population living close to the incinerator is low, long-term hazard due to Hg accumulation in the surrounding environment should be seriously taken into account.