Bacterial leaching of metals from sewage sludge by indigenous iron-oxidizing bacteria

Bioleaching of metals can be achieved in sewage sludge using Thiobacillus ferrooxidans, which obtains its energy requirements from the oxidation of added ferrous iron. The purpose of this study was to verify the presence of indigenous T. ferroxidans and to evaluate their adaptive capacity and leaching potential. Nineteen sludges (primary, secondary, aerobically and anaerobically digested, oxidation pond) were tested and all of them contained indigenous iron-oxidizing bacteria. The acclimation of these organisms by successive transfers allowed a rise of sludge redox potential over 450 mV and a decrease of sludge pH between 3.8 and 2.2 over a 10-day incubation period. The metal solubilization efficiencies were Cd: 55-98%, Cr: 0-32%, Cu: 39-94%, Mn: 71-98%, Ni: 37-98%, Pb: 0-31% and Zn: 66-98%, were reached with these indigenous strains. The results obtained show that the metal bioleaching may be easily realized by direct acclimation of sludge microflora.     

Bioproduction of ferric sulfate used during heavy metals removal from sewage sludge

Toxic metals removal from wastewater sewage sludge can be achieved through microbial processes involving Acidithiobacillus ferrooxidans. The oxidation of ferrous ions by A. ferrooxidans, cultured in sewage sludge filtrate, was studied in both batch and continuous flow stirred tank reactors. Sewage sludge filtrate containing natural nutrients (phosphorus and nitrogen) was recovered as effluent following the dehydration of a primary and secondary sludge mixture. Batch and continuous flow stirred tank reactor tests demonstrated that A. ferrooxidans were able to grow and completely oxidize ferrous iron in a culture medium containing more than 80% (v v(-1)) sewage sludge filtrate with 10 g Fe(II) L(-1) added. Toxic levels were reached when total organic carbon in the sewage sludge filtrate exceeded 250 mg L(-1). The ferric iron solution produced in the sludge filtrate by A. ferrooxidans was used to solubilize heavy metals in primary and secondary sludge. The solubilization of Cu, Cr, and Zn yielded 71, 49, and 80%, respectively. This is comparable with the yield percentages obtained using a FeCl(3) solution. The cost of treating wastewater sewage sludge by bioproducing a ferric ion solution from sewage sludge is three times less expensive than the conventional method requiring a commercial ferric chloride solution.     

Prediction of SVOC vegetation and atmospheric concentrations using calculated deposition velocities

A simple modeling concept was previously applied to study air-foliage exchange of both polybrominated diphenyl ethers (PBDEs) and polycyclic aromatic hydrocarbons (PAHs) using field measurements. In this paper, the predictive capabilities of this framework were tested using an independent set of data collected at the same sampling location for a different time period. Firstly, atmospheric (particle-bound and gaseous phase) PBDE and PAH concentrations were used to predict their accumulation in spruce needles. Conversely, we used PBDE and PAH concentrations in vegetation to predict their atmospheric concentrations. In both cases, calculated and measured values showed good agreement, providing evidence that the developed framework and our derived deposition velocities can be used as a predictive tool for these two different classes of semi-volatile organic compounds.     

PAH removal from spiked municipal wastewater sewage sludge using biological, chemical and electrochemical treatments

Polycyclic aromatic hydrocarbons (PAHs) have been widely studied due to their presence in all the environmental media and toxicity to life. These molecules are strongly adsorbed on the particulate matters of soils, sludges or sediments because of their strong hydrophobicity which makes them less bioavailability, thus limiting their bioremediation. Different sludge treatment processes were tested to evaluate their performances for PAH removal from sludge prealably doped with 11 PAHs (5.5mg each PAH kg(-1) of dry matter (DM)): two biological processes (mesophilic aerobic digestion (MAD) and simultaneous sewage sludge digestion and metal leaching (METIX-BS)) were tested to evaluate PAH biodegradation in sewage sludge. In parallel, two chemical processes (quite similar Fenton processes: chemical metal leaching (METIX-AC) and chemical stabilization (STABIOX)) and one electrochemical process (electrochemical stabilization (ELECSTAB)) were tested to measure PAH removal by these oxidative processes. Moreover, PAH solubilisation from sludge by addition of a nonionic surfactant Tween 80 (Tw80) was also tested. The best yields of PAH removal were obtained by MAD and METIX-BS with more than 95% 3-ring PAH removal after a 21-day treatment period. Tw80 addition during MAD treatment increased 4-ring PAHs removal rate. In addition, more than 45% of 3-ring PAHs were removed from sludge by METIX-AC and during ELECSTAB process were quiet good with approximately 62% of 3-ring PAHs removal. However, little weaker removal of 3-ring PAHs (<35%) by STABIOX. None of the tested processes were efficient for the elimination of high molecular weight (> or = 5-ring) PAHs from sludge.     

消融的冰川：加拿大班夫国家公园亚高山带鲍湖中持久性有机氯的主要来源

有机氯杀虫剂和多氯联苯（PCB）是环境中普遍而稳固的化合物。现已查明，由于它们从温暖的地区逐渐蒸发出来，并在较冷的地区凝聚下来，因而它们富集在寒冷的环境中。在本研究中，我们的结果是，消融的冰川供给阿尔伯达亚高山带湖泊中的有机氯输入量为50%～97％，而提供的水量为73％。对氚的分析结果表明，在夏季的中、晚期，至少10％的冰川消融物是在1950～1970年期间沉积下来的，这期间它受到有机氯更多的污染。这一发现表明，气候变暖可能会使消融的冰川成为日益增多的淡水污染物来源。由于有机物贫乏的冰川粘土对多氯联苯这样的疏水化合物的吸附能力有限，因此冰川水流带来的有机氯大多呈溶解状态。     

Hybrid process for heavy metal removal from wastewater sludge.

Bioleaching processes have been demonstrated to be effective technologies in removing heavy metals from wastewater sludge, but long hydraulic retention times are typically required to operate these bioprocesses. A hybrid process (coupling biological and chemical processes) has been explored in laboratory pilot-scale experiments for heavy metals (cadmium [Cd], copper [Cu], chromium [Cr], and zinc [Zn]) removal from three types of sludge (primary sludge, secondary activated sludge, and a mixture of primary and secondary sludge). The hybrid process consisted of producing a concentrate ferric ion solution followed by chemical treatment of sludges. Ferric iron solution was produced biologically via oxidation of ferrous iron by A. ferrooxidans in a continuous-flow stirred tank (5.2 L) reactor (CSTR). Wastewater sludge filtrate (WSF) containing nutrients (phosphorus and nitrogen) has been used as culture media to support the growth and activity of indigenous iron-oxidizing bacteria. Results showed that total organic carbon (TOC) concentrations of the culture media in excess of 235 mg/L were found to be inhibitory to bacterial growth. The oxidation rate increased as ferrous iron concentrations ranged from 10 to 40 g Fe2+/L. The percentage of ferrous iron (Fe2+) oxidized to ferric iron (Fe3+) increased as the hydraulic retention time (HRT) increased from 12 to 48 h. Successful and complete Fe2+ oxidation was recorded at a HRT of 48 h using 10 g Fe2+/L. Subsequently, ferric ion solution produced by A. ferrooxidans in sludge filtrate was used to solubilize heavy metals contained in wastewater sludge. The best solubilization was obtained with a mixture of primary and secondary sludge, demonstrating a removal efficiency of 63, 71, 49, and 80% for Cd, Cu, Cr, and Zn, respectively.     

Pilot-plant study of wastewater sludge decontamination using a ferrous sulfate bioleaching process.

The objective of this research was to investigate the performance of the ferrous sulfate bioleaching (FSBL) process in a pilot plant for decontamination and stabilization of wastewater sludge. Batch and continuous experiments, conducted with two 4-m3 bioreactors using indigenous iron-oxidizing bacteria (20% v/v of inoculum) with addition of 4.0 g ferrous sulfate heptahydrate per liter of sludge initially acidified to pH 4.0, were sufficient for effective heavy metal (cadmium, copper, manganese, zinc, and lead) removal yields. The average metal removal yields during the FSBL process were as follows: cadmium (69 to 75%), copper (68 to 70%), manganese (72 to 73%), zinc (65 to 66%), and lead (16%). The FSBL process was also found to be effective in removing both fecal and total coliforms (abatement > 5 to 6 log units). The nutrients content (nitrogen, phosphorus, and magnesium) were also preserved in decontaminated sludge.     

Examining spatial patterns in polycyclic aromatic compounds measured in stream macroinvertebrates near a small subarctic oil and gas operation

The Cameron River runs through a small, remote petrochemical development in the Cameron Hills (Northwest Territories, Canada). In order to evaluate the exposure of aquatic biota to contaminants from oil and gas activities, we measured polycyclic aromatic compounds (PACs) in macroinvertebrates collected from sites and tributaries along the Cameron River, including upstream and downstream of the development, and sites located near drilled wells (developed). Macroinvertebrate tissue PAC burdens ranged from 0.2–2.8 μg g^?1 lipid for unsubstituted compounds, and from 4.2–63.2 μg g^?1 lipid for alkylated compounds, relatively low compared to similar studies from more industrialized regions in North America. There was no significant difference in tissue PAC burdens between upstream, downstream, or developed sites (p?=?0.12), although alkyl PACs in five out of seven developed sites were higher than the regional average. Petrogenic PACs were dominant in most samples, including alkyl fluorines, alkyl phenanthrene/anthracenes, and alkyl dibenzothiophenes. Minimal changes in PAC composition in macroinvertebrate tissues were detected along the Cameron River, with the exception of the two sites furthest downstream that had high concentrations of C3-C4 naphthalene. Overall, our results suggest that oil and gas development in the Cameron Hills has not resulted in substantial increases in PAC bioaccumulation in stream macroinvertebrates, although the potential that alkyl naphthalenes are being transported downstream from the development warrants further attention.     

Bioaccumulation of the pharmaceutical 17α-ethinylestradiol in shorthead redhorse suckers (Moxostoma macrolepidotum) from the St. Clair River, Canada

17α-ethynylestradiol (EE2), a synthetic estrogen prescribed as a contraceptive, was measured in Shorthead Redhorse Suckers (ShRHSs) (Moxostoma macrolepidotum) collected near a wastewater treatment plant (WWTP) in the St. Clair River (Ontario, Canada). We detected EE2 in 50% of the fish samples caught near the WWTP (Stag Island), which averaged 1.6 ± 0.6 ng/g (wet weight) in males and 1.43 ± 0.96 ng/g in females. No EE2 was detected in the samples from the reference site (Port Lambton) which was 26 km further downstream of the Stag Island site. Only males from Stag Island had VTG induction, suggesting the Corunna WWTP effluent as a likely source of environmental estrogen. EE2 concentrations were correlated with total body lipid content (R² = 0.512, p < 0.01, n = 10). Lipid normalized EE2 concentrations were correlated with δ¹⁵N (R² = 0.436, p < 0.05, n = 10), suggesting higher EE2 exposures in carnivores. Our data support the hypothesis of EE2 bioaccumulation in wild fish.     

Decontamination of Fly Ash and Used Lime from Municipal Waste Incinerator Using Thiobacillus ferrooxidans

Thiobacillus ferrooxidans to leach metals from APCR to render them nonhazardous. The multistage solubilization process involves an alkaline aqueous phase that removes some Pb. In the second phase, the APCR are acidified to pH 4 with H₂SO₄, then inoculated with a bacterial culture that has been acclimated in the presence of 2% Fe (FeCl₃). Several rinses and decantings achieve removal of the leachable metals. The final step involves the addition of Ca(H₂PO₄)₂ and an increase in the treatment pH prior to the final filtration. Viability of thiobacilli in APCR was poor. Despite this problem, the removal of Pb was 35.9%, 46.0%, and 68.7% (for APCR containing 1594, 3026, and 5038 mg Pb/kg, respectively), which demonstrates greater metal removal with increased APCR contamination. Zn removal varied from 68.2% (8273 mg Zn/kg APCR) to 79.5% (16,873 mg Zn/kg APCR), which was positively correlated to the level of residue contamination, whereas Cu was removed in the proportions of 26.9% (495 mg Cu/kg APCR) to 68.2% (465 mg Cu/kg APCR). Cadmium removal appeared to be independent of the level of Cd in the APCR; Cd was removed to the greatest degree, with a variation of 92.0% (129 mg Cd/kg APCR) to 94.7% (267 mg Cd/kg APCR). The treated APCR were tested using four different leachate tests. The APCR released 43 mg Pb/liter during contact with water, and 7.40 mg Cd/liter during TCLP [the toxicity characterization leaching procedure of the United States Environmental Protection Agency (US EPA)]. After biological treatment, the leachate from TCLP was within the acceptance criteria of the US EPA, if the pH of the APCR was increased to pH 5 after the biological treatment. In the case of the Transport Canada leaching test, a betterment of the process is required in order to satisfy the stringent regulatory level of 0.5 mg Cd/liter (0.68 and 0.57 mg/liter).