One-Component Spray Polyurethane Foam from Liquefied Pinewood Polyols: Pursuing Eco-Friendly Materials

The use of petroleum-derived products should be avoided regarding the principles of green and sustainable chemistry. The work reported herein, is aimed at the liquefaction of pine shavings for the production of an environmentally-friendly polyol suitable to be used in the formulations of sprayable polyurethane foams. The biopolyols were obtained in high yield and were used to replace those derived from fossil sources, to produce more “greener” polyurethane foams and therefore, less dependent on petroleum sources, since the polyol component was substituted by products resulting from biomass liquefaction. The partial and fully exchange of the polyols was accomplished, and the results compared with a reference foam. The foams were afterward, chemical, physical, morphological, and mechanically characterized. The complete replacement of polyether polyol and polyol polyester has presented some similar characteristics as that used as a reference, validating that the path chosen for the development of more sustainable materials is on the right track for the contribution to a cleaner world.     

Percolation and batch leaching tests to assess release of inorganic pollutants from municipal solid waste incinerator residues

In this study, percolation and batch leaching tests were considered in order to characterize the behaviour of air pollution control (APC) residues produced in a municipal solid waste incinerator (MSWI) as a function of the liquid to solid ratio (L/S). This waste is hazardous, and taking into account their physical and chemical properties, leaching of contaminants into the environment is the main concern. In our work the leaching behaviour of toxic heavy metals (Pb, Zn, Cr, Ni and Cu) and inorganics associated with soluble salts (Na, K, Ca and Cl) was addressed. Although pH of the leaching solution is the most important variable, L/S may also play an important role in leaching processes. In our work, results from column and batch tests were compared in terms of concentration (mg/L) and releasing (mg/kg). The APC residues revealed to be hazardous according to both tests, and both Pb and Cl⁻ far exceeded the regulatory thresholds. The material exhibits high solubility, and when the liquid to solid ratio was high, more than 50% can be solubilised. The patterns of release may be in some cases availability or solubility controlled, and the former was easier to identify. When the results from column and batch experiments were compared by representing the cumulative released amounts (in mg/kg) as a function of L/S, both curves match for Zn, Ni, Cu, K, Na, Cl and Ca, but for Cr and Pb a significant difference was observed. In fact, the column experiments revealed that under percolation conditions it should be expected slow releasing of Pb along time. From this study, it can be concluded that the released amounts obtained in batch experiments for a certain L/S should be considered as the worst case for medium term. Some simple models proposed on the literature and based on local equilibrium assumption showed good fitting to experimental data for soluble species (non-reactive solutes).     

Treatment and use of air pollution control residues from MSW incineration: an overview

This work reviews strategies for the management of municipal solid waste incineration (MSWI) residues, particularly solid particles collected from flue gases. These tiny particles may be retained by different equipment, with or without additives (lime, activated carbon, etc.), and depending on the different possible combinations, their properties may vary. In industrial plants, the most commonly used equipment for heat recovery and the cleaning of gas emissions are: heat recovery devices (boiler, superheater and economiser); dry, semidry or wet scrubbers; electrostatic precipitators; bag filters; fabric filters, and cyclones. In accordance with the stringent regulations in force in developed countries, these residues are considered hazardous, and therefore must be treated before being disposed of in landfills. Nowadays, research is being conducted into specific applications for these residues in order to prevent landfill practices. There are basically two possible ways of handling these residues: landfill after adequate treatment or recycling as a secondary material. The different types of treatment may be grouped into three categories: separation processes, solidification/stabilization, and thermal methods. These residues generally have limited applications, mainly due to the fact that they tend to contain large quantities of soluble salts (NaCl, KCl, calcium compounds), significant amounts of toxic heavy metals (Pb, Zn, Cr, Cu, Ni, Cd) in forms that may easily leach out, and trace quantities of very toxic organic compounds (dioxin, furans). The most promising materials for recycling this residue are ceramics and glass-ceramic materials. The main purpose of the present paper is to review the published literature in this field. A range of studies have been summarized in a series of tables focusing upon management strategies used in various countries, waste composition, treatment processes and possible applications.     

Diagnostic study of critical circuits of the Kraft pulp production process considering the environmental aspects

This paper describes systematic work undertaken in the field of atmospheric emissions from Portuguese Kraft pulp mills. The study led to the determination of emission factors from stationary sources, which proved to be an important tool for assessing the need for investment in air pollution abatement equipment, specifically for malodorous gases.     

Direct and efficient liquefaction of potato peel into bio-oil

The world has become dependent on petroleum as a feedstock for most products that we use in our daily lives. As an alternative, bio-refineries that transform biomass into biofuels and primary chemicals are emerging. Actually, many wastes are not fully recycled. For instance, potato peel is a cheap residue available from the potato industry. Up to now, potato peel has been used mostly for livestock feeding. Here, potato peel waste was subjected to direct acid liquefaction at 160 °C in 2-ethylhexanol and diethylene glycol using p-toluene sulfonic acid as catalyst. The product was characterized by infrared spectroscopy, chemical analysis, hydroxyl number and acid value. Results show that liquefaction was achieved in yields higher than 80%. The reactional profile shows two time zones, one comprising the process of liquefaction and one corresponding to the process of decomposition. Kinetics indicate that the liquefaction process occurs 1.9 times faster than the decomposition process. Overall, our findings show for the first time that, despite the water content, potato peel waste can be used to produce bio-oil. The products can be further used as fuels or refined chemicals such as levulinic acid, furfural, 5-hydroxyfurfural, dimethyl furfural and sugars in fermentation processes.     

Sustainable livelihoods and people’s vulnerability in the face of coastal hazards

The present study investigates into the link between people’s vulnerability in the face of coastal hazards and sustainable livelihoods. It focuses on the town of Borongan in the Philippines and draws on questionnaire-based surveys and focus group discussions. This research shows that local fishermen are often compelled to go out fishing despite pending typhoon or storm surge to sustain the daily needs of their family. Its also demonstrates that the capacity of these people to protect themselves from the threat is constrained by poor and fragile livelihoods. In the event of a crisis, the study argues that people resort to a range of adjustments on their daily life which is rooted in the strength and diversity of their livelihoods. To reduce people’s vulnerability and enhance capacities to face coastal hazards, the study fosters Community-Based Disaster Risk Reduction with special emphasis to sustainable livelihoods.     

Diagnostic Study of Critical Circuits of the Kraft Pulp Production Process Considering the Environmental Aspects

Abstract

This paper describes systematic work undertaken in the field of atmospheric emissions from Portuguese Kraft pulp mills. The study led to the determination of emission factors from stationary sources, which proved to be an important tool for assessing the need for investment in air pollution abatement equipment, specifically for malodorous gases.     

The influence of pH on the leaching behaviour of inorganic components from municipal solid waste APC residues

The influence of pH on the leaching behaviour of air pollution control (APC) residues produced in municipal solid waste incineration (MSWI) is addressed in this study. The residue is considered hazardous waste, and in accordance with their chemical properties, the leaching of contaminants into the environment is the main concern. Several leaching tests can be used for research studies or regulatory purposes, where a wide variety of conditions may be tested. Our work deals mainly with the leaching behaviour of toxic heavy metals (Pb, Cd, Zn, Cr, Ni, Cu) and inorganics associated with soluble salts (Na, K, Ca, Cl). The main goal is to obtain an overview of the leachability of APC residues produced in a Portuguese MSWI process. Among the different variables that may have influence on the leaching behaviour, pH of the leachant solution is the most important one, and was evaluated through pH static tests. The acid neutralization capacity (ANC) of the residue was also determined, which is in the range of 6.2–6.8 meq g^?1 (for pH = 7) and 10.1–11.6 meq g^?1 (for pH = 4). The analysis of the leaching behaviour is particularly important when the leaching is solubility controlled. The amphoteric behaviour of some elements was observed, namely for Pb and Zn, which is characterized through high solubilization at low and high pH and moderate or low solubility at neutral or moderate high pH. The solubility curves for Pb, Cd, Zn, Cr, Ni and Cu as a function of pH were obtained, which are very useful for predicting the leaching behaviour in different scenarios. The solubility of K and Na reveals to be nearly independent of the solution pH and the released amount is mainly availability-controlled. Moreover, the pH static test showed that Cl^? is the most pH-independent species. The APC residue turns out to be a hazardous waste because of the high leaching of lead and chloride. On the other hand, leaching of elements like cadmium, nickel and copper is limited by the high pH of the residue, and as long as the waste keeps its ANC, the risk of mobilization of these elements is low.     

Recycling of air pollution control residues from municipal solid waste incineration into lightweight aggregates

This work focuses on the assessment of technological properties and on the leaching behavior of lightweight aggregates (LWA) produced by incorporating different quantities of air pollution control (APC) residues from municipal solid waste (MSW) incineration. Currently this hazardous waste has been mostly landfilled after stabilization/solidification. The LWA were produced by pelletizing natural clay, APC residues as-received from incineration plant, or after a washing treatment, a small amount of oil and water. The pellets were fired in a laboratory chamber furnace over calcium carbonate. The main technological properties of the LWA were evaluated, mainly concerning morphology, bulk and particle densities, compressive strength, bloating index, water adsorption and porosity. Given that APC residues do not own expansive (bloating) properties, the incorporation into LWA is only possible in moderate quantities, such as 3% as received or 5% after pre-washing treatment.The leaching behavior of heavy metals from sintered LWA using water or acid solutions was investigated, and despite the low acid neutralization capacity of the synthetic aggregates, the released quantities were low over a wide pH range.In conclusion, after a washing pre-treatment and if the percentage of incorporation is low, these residues may be incorporated into LWA. However, the recycling of APC residues from MSW incineration into LWA does not revealed any technical advantage.     

Production of biodiesel from waste frying oils

Waste frying oils transesterification was studied with the purpose of achieving the best conditions for biodiesel production. Transesterification reactions were carried out for 1 h using waste frying oils (WFOs), methanol, and sodium hydroxide as catalyst. In order to determine the best conditions for biodiesel production, a series of experiments were carried out, using methanol/WFO molar ratios between 3.6 and 5.4 and catalyst/WFO weight ratios between 0.2% and 1.0%. For oils with an acid value of 0.42 mg KOH/g, results show that a methanol/WFO ratio of 4.8 and a catalyst/WFO ratio of 0.6% gives the highest yield of methyl esters. Furthermore, an increase in the amount of methanol or catalyst quantity seems to simplify the separation/purification of the methyl esters phase, as showed by a viscosity reduction and an increasing purity to values higher than 98% for methyl esters phase.