Transport and degradation of toluene and o-xylene in an unsaturated soil with dipping sedimentary layers

A lysimeter trench was established at the Gardermoen delta (50 km north of Oslo, Norway) to study the flow of water and transport and degradation of aromatic jet fuel components (toluene and o-xylene) in the undisturbed unsaturated zone. Site investigations with ground-penetrating radar revealed the presence of dipping sedimentary layers within the foreset unit. This study has shown that the foreset bed of the Gardermoen delta structure provided a preferential flow path for the transport of the solute plumes, but did not have dramatic effects on the degradation potential under the current conditions. The degradation potential for toluene and o-xylene in the unsaturated zone at Gardermoen was very high and almost all of the injected hydrocarbons were biodegraded before reaching the saturated zone. However, the horizontal displacement of the plume showed that knowledge about sedimentary structures in the unsaturated zone is important for a sufficient monitoring of contaminant transport and for remediation purposes. Carbon dioxide and O2 were measured in situ simultaneously with extraction of water samples, and indicated aerobic biodegradation of toluene and o-xylene. Overall, first-order degradation coefficients were calculated to be in the range of 0.19 to 0.21 d(-1) and 0.10 to 0.11 d(-1) for toluene and o-xylene, respectively.     

Column studies on transport of deicing additive benzotriazole in a sandy aquifer and a zerovalent iron barrier

Benzotriazole (BTA), a chemical with wide industrial applications, is a typical additive in deicer/anti-icer used at airport. To achieve a better understanding of the transport behaviour and environmental fate of BTA, laboratory column studies have been performed on subsoil samples from Oslo Airport, Gardermoen. To explore possibilities for aquifer remediation, BTA behaviour was also studied in a column of granular zerovalent iron (Fe(0)). The subsoil column study demonstrates a very limited retardation of BTA. Consecutive loadings of BTA of the subsoil column showed no change of the break-through curve (BTC) and complete desorption was observed. The sorption behaviour of BTA to metallic iron (Fe(0)) was rather complex. Considerable retardation was observed in the Fe(0) column and repeated BTA loading resulted in an earlier break-through. Between 20% and 50% of the input concentration was retained permanently in the iron (Fe(0)) column. The BTA sorption to metallic iron was found to be enhanced by chloride which lowered the break-through concentration (i.e the C/C(0) plateau). The fraction of BTA remaining in the iron column was found to vary with the flow rate, indicating a time dependant multilayer sorption mechanism. The steady increase in the amount of adsorbed BTA to the iron column during loading corresponds to a rather strong bonding of 4-15 BTA layers to the iron surface. A very slow desorption of BTA was observed; even after flushing with 753 pore volumes of BTA free water, 7.5% of the BTA remained in the column. A geochemical model was developed based on PHREEQC-2 to simulate the sorption and transport of BTA in the tested materials. The BTA sorption was modelled with Freundlich sorption isotherms, as earlier determined in batch experiments. A slight adjustment of the Freundlich parameters was required to fit the observed column break-through. However, our model was not able to simulate the long-term retainment of BTA in the granular iron columns. The simulations confirm the high mobility of BTA in groundwater aquifers and suggest that zerovalent iron could be used to retain a BTA plume, although oxidation of the sorbent might reduce the long-term performance of such a remediation scheme and slow desorption has been observed.     

Diffusion of PAH and PCB from contaminated sediments with and without mineral capping; measurement and modelling

A novel laboratory microcosm test was developed to measure the diffusion of native PAHs and PCBs from sediments in the presence and absence of a capping layer. Diffusive flux of 15 PAHs and 7 PCBs from uncapped sediment from Oslo harbour was 3.8+/-0.9 microg m(-2)d(-1) and 0.010+/-0.003 microg m(-2)d(-1), respectively. The flux from sediments capped with 1cm mineral cap (crushed limestone or crushed gneiss (0-2mm)), observed during the first 410 d, was 3.5-7.3% of the flux from uncapped sediments. By measuring freely dissolved pore water concentrations of 10 PAHs the flux in the microcosm was modelled with steady state and transient diffusion models. The measured flux from uncapped sediment was 27-290% of modelled steady state flux. Good agreement was also found between the measured flux of pyrene from capped sediment and the flux modelled with the transient model when fitting only with the distribution coefficients for pyrene between the cap material and water (Kd_pyr). Fitted Kd_pyr, (210 and 23 l kg(-1) for limestone and gneiss, respectively) was in the same order of magnitude as K(d) calculated from organic carbon content in the cap materials (68 and 14 l kg(-1) respectively). Calculation of the efficiency of a hypothetical cap with 10 cm diffusion path shows that the increased diffusion path length alone can yield a flux reduction >99% through a strong increase in the stagnant diffusive boundary layer from <1 to 100mm.     

Investigation of hydrogeologic processes in a dipping layer structure: 2. Transport and biodegradation of organics

Numerical simulation tools have been used to study the dominating processes during transport of aromatic hydrocarbons in the unsaturated soil zone. Simulations were based on field observations at an experimental site located on a glacial delta plain with pronounced layered sedimentary structures. A numerical model for transport in the unsaturated zone, SWMS-3D, has been extended to incorporate coupled multispecies transport, microbial degradation following Monod kinetics and gas diffusive transport of oxygen and hydrocarbons. The flow field parameters were derived from previous work using nonreactive tracers. Breakthrough curves (BTC) from the hydrocarbon field experiment were used to determine sorption parameters and Monod kinetic parameters using a fitting procedure. The numerical simulations revealed that the assumption of homogeneous layers resulted in deviations from the field observations. The deviations were more pronounced with incorporation of reactive transport, compared with earlier work on nonreactive transport. To be able to model reasonable BTC, sorption had to be reduced compared to laboratory experiments. The initial biomass and the maximum utilisation rate could be adjusted to capture both the initial lag phase and the overall degradation rate. Nevertheless, local oxygen limitation is predicted by the model, which was not observed in the field experiment. Incorporation of evaporation and diffusive gas transport of the hydrocarbons did not significantly change the local oxygen demand. The main cause of the observed discrepancies between model and field are attributed to channelling as a result of small-scale heterogeneities such as biopores.     

Quantification of activated carbon contents in soils and sediments using chemothermal and wet oxidation methods

Activated carbon (AC) strongly sorbs organic pollutants and can be used for remediation of soils and sediments. A method for AC quantification is essential to monitor AC (re)distribution. Since AC is black carbon (BC), two methods for BC quantification were tested for AC mixed in different soils and sediments: i) chemothermal oxidation (CTO) at a range of temperatures and ii) wet-chemical oxidation with a potassium dichromate/sulfuric acid solution. For three soils, the amount of AC was accurately determined by CTO at 375 °C. For two sediments, however, much of the AC disappeared during combustion at 375 °C, which could probably be explained by catalytic effects by sediment constituents. CTO at lower temperatures (325-350 °C) was a feasible alternative for one of the sediments. Wet oxidation effectively functioned for AC quantification in sediments, with almost complete AC recovery (81-92%) and low remaining amounts of native organic carbon (5-16%).     

Passive samplers versus surfactant extraction for the evaluation of PAH availability in sediments with variable levels of contamination

The purpose of this study was to test the efficiency of passive solid samplers, polyoxymethylene (POM) strips and polydimethylsiloxane (PDMS) silicon tubing, to predict the bioavailability of native PAHs in contaminated sediments. Results were compared with worm bioaccumulation data and solid/liquid extraction using the surfactant Brij((R)) 700 (B700). The two passive samplers were found to act differently. The PDMS sampler overestimated the availability of PAHs in all studied sediments. The POM method provided results in accordance with those obtained with the B700 extraction. However, POM and B700 methods underestimated PAH availability in low contaminated sediments where biological factors (digestible organic matter) become important. Bioavailability of total PAHs was correctly predicted by POM and B700 in highly contaminated aluminum smelter sediments. A closer examination of individual PAH results indicated that both techniques overestimated the availability of large molecules with logK(ow)>6 suggesting a biological mechanism limiting uptake of larger PAHs which seems to be related to the molecular size of compounds.     

Bioassay-directed identification of toxic organic compounds in creosote-contaminated groundwater

Despite the fact that creosote mainly consists of polycyclic aromatic hydrocarbons (PAHs), more polar compounds like phenolics, benzenes and N-, S-, O-heterocyclics dominate the groundwater downstream from creosote-contaminated sites. In this study, bioassay-directed fractionation, combined with fullscan GC-MS, identified organic toxicants in creosote-contaminated groundwater. An organic extract of creosote-contaminated groundwater was fractionated on a polar silica column using high performance liquid chromatography (HPLC), and the toxicity of the fractions was measured by the Microtox-bioassay. PAHs, which comprise up to 85% of pure creosote, accounted for only about 13% of total toxicity in the creosote-contaminated groundwater, while methylated benzenes, phenolics and N-heterocyclics accounted for ca. 80% of the measured toxicity. The fraction containing alkylated quinolines was the most toxic single fraction, accounting for 26% of the total measured toxicity. The results imply that focus on PAHs may underestimate risks associated with creosote-contaminated groundwater, and that environmental risk assessment should focus to a higher degree on substituted PAHs and phenolics because they are more toxic than the unsubstituted ones. Additionally, benzenes and N-heterocyclics (e.g., alkylated quinolines) should be assessed.     

Addressing emerging risks using carbon capture and storage as an example

The European iNTeg-Risk project is a large-scale integrated project aimed at improving the management of emerging risks related to new technologies in European industry. The project aims to build a new management paradigm for emerging risks as a set of principles supported by a common language, agreed tools and methods, and key performance indicators, all integrated into a single framework. It is using a number of Emerging Risk Representative Applications (ERRAs), or case studies, to inform the development of the framework; one of which concerns the carbon capture and storage (CCS) process.This paper describes the iNTeg-Risk CCS ERRA. Relevant hazards and properties of carbon dioxide are described and the emerging risks from CCS are discussed. Three new tools have been developed or trialled within the ERRA. These are: the DyPASI methodology for taking account of atypical (not usually identified) events during hazard identification; a methodology for including the time dimension in a risk assessment; and life-cycle approaches for risk management and communication. For CCS, the risk assessment needs to include both short-term potential accidents from capture, transport or injection, as well as very long-term risks from storage. Knowledge gaps which are generic to emerging risks are also identified.     

Infiltration and redistribution of LNAPL into unsaturated layered porous media

Enhanced understanding of light non-aqueous phase liquid (LNAPL) infiltration into heterogeneous porous media is important for the effective design of remediation strategies. We used a 2-D experimental facility that allows for visual observation of LNAPL contours in order to study LNAPL redistribution in a layered porous medium. The layers are situated in the unsaturated zone near the watertable and they are inclined to be able to observe the effect of discontinuities in capillary forces and relative permeabilities. Two experiments were performed. The first experiment consisted of LNAPL infiltration into a fine sand matrix with a coarse sand layer, and the second experiment consisted of a coarse sand matrix and a fine sand layer. The numerical multi-phase flow model STOMP was validated with regard to the experimental results. This model is able to adequately reproduce the experimental LNAPL contours. Numerical sensitivity analysis was also performed. The capillarity contrast between sands was found to be the main controlling factor determining the final LNAPL distribution.     

Relation between PAH and black carbon contents in size fractions of Norwegian harbor sediments

Distributions of total organic carbon (TOC), black carbon (BC), and polycyclic aromatic hydrocarbons (PAH) were investigated in different particle size fractions for four Norwegian harbor sediments. The total PAH (16-EPA) concentrations ranged from 2 to 113 mg/kg dry weight with the greatest fraction of PAH mass in the sand fraction for three of the four sediments. TOC contents ranged from 0.84% to 14.2% and BC contents from 0.085% to 1.7%. This corresponds to organic carbon (OC = TOC - BC) contents in the range of 0.81-14% and BC:TOC ratios of 1.3-18.1%. PAH isomer ratios suggested that the PAH in all four sediments were of pyrogenic origin. Furthermore, stronger correlations between PAH versus BC (r2 = 0.85) than versus OC (r2 = 0.15) were found. For all size fractions and bulk sediments, the PAH-to-BC ratios for the total PAHs were on average 6+/-3 mg PAH/g BC. These results suggest that PAH distributions were dominated by the presence of BC, rather than OC. As sorption to BC is much stronger than sorption to OC, this may result in significantly lower dissolved concentrations of PAH than expected on the basis of organic carbon partitioning alone.