Hg concentrations and related risk assessment in coral reef crustaceans, molluscs and fish from New Caledonia

There is a dramatic lack of data on Hg levels in marine organisms from tropical areas, and in particular from New Caledonia. For the first time, this study reports the total Hg concentrations in the tissues of several marine taxa from the New Caledonian lagoon. Seafood from both wild and farmed populations was considered. Hg concentrations varied over three orders of magnitudes according to factors including species, age (size/weight), trophic level, lifestyle and geographical origin. Taking into account the edible tissues, estimations of the amount of flesh that should be consumed by a 60-kg person to reach the Hg Provisional Tolerable Weekly Intake (PTWI) reveal acceptable risk for Human health in general. However, a risk was clearly identified in one site of the lagoon (i.e. Grande Rade) where high Hg concentrations were measured. These concentrations were higher than values reported in the current literature.     

Viable skin efficiently absorbs and metabolizes bisphenol A

Skin contact has been hypothesized to contribute to human exposure to bisphenol A (BPA). We examined the diffusion and metabolism of BPA using viable skin models: human skin explants and short-term cultures of pig ear skin, an alternative model for the study of the fate of xenobiotics following contact exposure. ¹⁴C-BPA [50-800 nmol] was applied on the surface of skin models. Radioactivity distribution was measured in all skin compartments and in the diffusion cells of static cells diffusion systems. BPA and metabolites were further quantified by radio-HPLC. BPA was efficiently absorbed in short-term cultures, with no major difference between the models used in the study [viable pig ear skin: 65%; viable human explants: 46%; non-viable (previously frozen) pig skin: 58%]. BPA was extensively metabolized in viable systems only. Major BPA metabolites produced by the skin were BPA mono-glucuronide and BPA mono-sulfate, accounting together for 73% and 27% of the dose, in pig and human, respectively. In conclusion, experiments with viable skin models unequivocally demonstrate that BPA is readily absorbed and metabolized by the skin. The trans-dermal route is expected to contribute substantially to BPA exposure in human, when direct contact with BPA (free monomer) occurs.     

Can aquatic distribution of human pharmaceuticals be related to pharmacological data?

The recognition of pharmaceuticals as significant environmental contaminants has only been a recent phenomenon. Therefore there is a paucity of data relating to the fate and effects of pharmaceuticals once they enter an aquatic receiving system. The amount of work that needs to be done in terms of risk assessment for pharmaceuticals required by regulatory agencies is substantial. This paper has determined the environmental partitioning coefficient (K_d) of 13 diverse human pharmaceuticals in three model systems of differing combinations of solid phases and solutions. The K_d values were then compared with distribution values of the pharmaceuticals in the human body determined from pharmacological studies. This was done to assess the functional relationship between K_d and distribution values in the human body (V_D). K_d values ranged from 3 to 2450 L kg⁻¹. Regression coefficients ranged from r² = 0.62–0.72, indicating that V_D values are a useful indicator for the K_d values of the tested pharmaceuticals within the batch sorption systems. The relationship between K_d and V_D should therefore be further explored to determine whether this relationship can be applied to a broader range of pharmaceuticals in more diverse environmental systems. Exploiting available human pharmacological data in such a way would be of great benefit in prioritising human pharmaceuticals as environmental contaminants in the risk assessment process.     

Effect of metals on the adsorption and extractability of 14C-phenanthrene in soils

The fate of polycyclic aromatic hydrocarbons (PAHs) in contaminated soils may be affected by several environmental factors including the presence of co-contaminants. This study was conducted in order to assess the effect of metals on (i) the adsorption of 14C-phenanthrene in soils and (ii) its extractability and ability to form non-extractable residues. The first objective was accomplished using batch adsorption experiments with an uncontaminated agricultural soil spiked with the metals Cd, Cu, Pb, and Zn. Adsorption of phenanthrene was significantly higher after the addition of the metals (Kf = 21.48 vs. 8.55) and the desorption less readily reversible when compared to the unspiked soil. The extractability of phenanthrene was assessed with incubation (4 months, laboratory conditions) and microlysimeter experiments (6 months, natural climatic conditions) on three soils spiked with metals. All the soils were labelled with 14C-phenanthrene. The amount of extractable phenanthrene residues was significantly higher when the metals had been added to the soils. Nevertheless, the quantity of non-extractable residues was non-significantly different between the spiked and unspiked soils. The mechanism leading to increased adsorption and extractability of phenanthrene in the presence of metals is still unknown. In perspective, it would be interesting to assess the bioavailability of PAHs in the presence of metals in further experiments.     

An executive review of sludge pretreatment by sonication

Ultrasonication (US), which creates hydro-mechanical shear forces in cavitation, is an advanced technology in sludge pretreatment. However, there are many factors affecting the efficacy of cavitation and ultrasonication disintegration of sludge as a consequence. The objective of this work is to present an extensive review of evaluation approaches of sludge US pretreatment efficiency. Besides, optimization methodologies of related parameters, the differences of optimum values and the similarities of affecting trends on cavitation and sludge pretreatment efficiency were specifically pointed out, including ambient conditions, ultrasonic properties, and sludge characteristics. The research is a prerequisite for optimization of sludge US pretreatment efficiency in lab-scale and practical application. There is not-yet a comprehensive method to evaluate the efficiency of sludge US pretreatment, but some main parameters commonly used for this purpose are degree of sludge disintegration, proteins, particle size reduction, etc. Regarding US parameters, power input P_US, intensity I_US, and frequency F_S seem to have significant effects. However, the magnitude of the effect of P_US and probe size in terms of I_US has not been clearly detailed. Investigating very low F_S seems interesting but has not yet been taken into consideration. In addition, static pressure effect has been marginally studied only and investigation on the effect of pH prior to US process has been restricted. Their effects therefore should be varied separately and simultaneously with other related parameters, i.e. process conditions, ultrasonic properties, and sludge characteristics, to optimize sludge US pretreatment process.     

Spatial distribution and concentration assessment of total petroleum hydrocarbons in the intertidal zone surface sediment of Todos os Santos Bay, Brazil

The primary objective of this study was to investigate the concentrations and spatial distribution of the total petroleum hydrocarbons (TPHs) in the intertidal zone surface sediment of Todos os Santos Bay, Brazil, to assess the distribution and degree of contamination by TPHs, measure the level of TPH degradation in the surface sediment, and identify the organic matter sources. The surface sediment used in this study was collected in 50 stations, and TPHs, isoprenoid alkanes (pristane and phytane), and unresolved complex mixture (UCM) were analyzed by gas chromatography with a flame ionization detector. The total concentrations ranged from 0.22 to 40,101 μg g^?1 dry weight and showed a strong correlation with the total organic carbon (TOC) content. The highest TPH concentrations were observed in samples from the mangrove sediments of a river located near a petroleum refinery. Compared with other studies in the world, the TPH concentrations in the intertidal surface sediment of Todos os Santos Bay were below average in certain stations and above average in others. An analysis of the magnitude of UCM (0.11 to 17,323 μg g^?1 dry weight) and the ratios nC17/Pr and nC18/Ph suggest that an advanced state of oil weathering, which indicates previous contamination. The molar C/N ratios varied between 5 and 43, which indicate organic matter with a mixed origin comprising marine and continental contributions.     

Acute exposition to Roundup Transorb® induces systemic oxidative stress and alterations in the expression of newly sequenced genes in silverside fish (Odontesthes humensis)

Environmental Science and Pollution Research - Roundup Transorb® (RDT) is a glyphosate-based herbicide commonly used in agricultural practices worldwide. This herbicide exerts negative effects...     

Moulting patterns drive within-individual variations of stable isotopes and mercury in seabird body feathers: implications for monitoring of the marine environment

One major limitation in the use of body feathers of seabirds as a monitoring tool of the trophic structure and contamination levels of marine ecosystems is the degree of heterogeneity in feather chemical composition within individuals. Here, we tested the hypothesis that moulting patterns drive body feather heterogeneity, with synchronous moult minimizing within-individual variations, in contrast to asynchronous feather growth. Chicks of white-chinned petrels Procellaria aequinoctialis (representative of bird chicks) and adults of king penguins Aptenodytes patagonicus (representative of adult penguins) that moult their body feathers synchronously showed very low within-individual variations in their feather δ¹³C and δ¹⁵N values and mercury (Hg) concentrations. By contrast, body feathers of adults of Antarctic prions Pachyptila desolata (representative of adult seabirds with asynchronous feather growth during a protracted moult) presented much higher within-individual variances for the three parameters. These findings have three important implications for birds presenting a synchronous body moult. (1) They suggest that all body feathers from the same individual have identical δ¹³C and δ¹⁵N values and Hg content. (2) They predict negligible within-individual variations in the body feather values of other useful stable isotopes, such as δ²H and δ³⁴S, as well as in the concentrations of other compounds that are deposited in the keratin structure. (3) Analysis of one or any number of pooled body feathers is equally representative of the individual. In conclusion, we recommend that long-term routine monitoring investigations focus on birds presenting synchronous rather than asynchronous moult of body feathers both in marine and terrestrial environments. This means targeting chicks rather than adults and, for seabirds, penguins rather than adults of flying species.     

Seasonality and dynamics in coral reef macroalgae: variation in condition and susceptibility to herbivory

Seasonal variation in coral reef macroalgal size and condition is well documented, yet seasonal variability of herbivory on macroalgae by coral reef fishes is unknown. Herbivore feeding intensity was quantified monthly on an inner-shelf reef on the Great Barrier Reef, using Sargassum bioassays. Removal rates of transplants displayed high levels of variation with significantly higher rates of removal during the summer months. Differences in Sargassum plant size and condition suggest that the variability in herbivore feeding intensity is attributed primarily to the variation in the condition of the macroalgae, especially epiphyte loads. The dramatic changes in macroalgal removal reveal a considerable decrease in herbivore activity in the winter. This highlights the clear distinction between ‘summer’ and ‘winter’ months in terms of reef processes, emphasizing the high seasonal variation in macroalgal removal rates at different time of the year.     

Application of sludge-based carbonaceous materials in a hybrid water treatment process based on adsorption and catalytic wet air oxidation

This paper describes a preliminary evaluation of the performance of carbonaceous materials prepared from sewage sludges (SBCMs) in a hybrid water treatment process based on adsorption and catalytic wet air oxidation; phenol was used as the model pollutant. Three different sewage sludges were treated by either carbonisation or steam activation, and the physico-chemical properties of the resultant carbonaceous materials (e.g. hardness, BET surface area, ash and elemental content, surface chemistry) were evaluated and compared with a commercial reference activated carbon (PICA F22). The adsorption capacity for phenol of the SBCMs was greater than suggested by their BET surface area, but less than F22; a steam activated, dewatered raw sludge (SA_DRAW) had the greatest adsorption capacity of the SBCMs in the investigated range of concentrations (<0.05 mol L^?1). In batch oxidation tests, the SBCMs demonstrated catalytic behaviour arising from their substrate adsorptivity and metal content. Recycling of SA_DRAW in successive oxidations led to significant structural attrition and a hardened SA_DRAW was evaluated, but found to be unsatisfactory during the oxidation step. In a combined adsorption–oxidation sequence, both the PICA carbon and a selected SBCM showed deterioration in phenol adsorption after oxidative regeneration, but a steady state performance was reached after 2 or 3 cycles.