Adsorption characteristics of benzene on biosolid adsorbent and commercial activated carbons

This study selected biosolids from a petrochemical waste-water treatment plant as the raw material. The sludge was immersed in 0.5-5 M of zinc chloride (ZnCl2) solutions and pyrolyzed at different temperatures and times. Results indicated that the 1-M ZnCl2-immersed biosolids pyrolyzed at 500 degrees C for 30 min could be reused and were optimal biosolid adsorbents for benzene adsorption. Pore volume distribution analysis indicated that the mesopore contributed more than the macropore and micropore in the biosolid adsorbent. The benzene adsorption capacity of the biosolid adsorbent was 65 and 55% of the G206 (granular-activated carbon) and BPL (coal-based activated carbon; Calgon, Carbon Corp.) activated carbons, respectively. Data from the adsorption and desorption cycles indicated that the benzene adsorption capacity of the biosolid adsorbent was insignificantly reduced compared with the first-run capacity of the adsorbent; therefore, the biosolid adsorbent could be reused as a commercial adsorbent, although its production cost is high.     

Bioavailability evaluation of naphthalene in soil using persulfate oxidation and ultrasonic extraction method

Bioavailability is defined as the fraction of a soil contaminant readily available for microbial degradation and for naphthalene it could be estimated by conventional exhaustive extraction methods. In this study, a novel method that employed persulfate oxidation in combination with ultrasonic extraction (POUSE) was developed. Three parameters, temperature, duration of persulfate oxidation, and the ratio of persulfate to soil organic matter (2S,082 /SOM; g g-1), were investigated to obtain an optimum operating conditions. Under the condition, naphthalene bioavailability estimated by the POUSE method was verified and compared with other three exhaustive methods i.e. sonicator, supercritical fluid extraction (SFE), and soxhlet extraction (SE). When the S2,O(8)2-/SOM ratio was controlled at 11.6 g g-1, the optimum operating conditions of the POUSE method were 70 degreesC and 3 hr, for the temperature and duration. Under these conditions, the residual naphthalene concentrations were correlated well with the residual naphthalene concentrations for both the cases of freshly spiked and aged soils. By contrast, the sonicator, SFE, and the SE overestimated the naphthalene bioavailability since these three methods extracted naphthalene much more than that of biodegradation test. These results demonstrated that the POUSE could estimate more precisely the naphthalene bioavailability.     

Adsorption Characteristics of Benzene on Biosolid Adsorbent and Commercial Activated Carbons

Abstract

This study selected biosolids from a petrochemical waste-water treatment plant as the raw material. The sludge was immersed in 0.5-5 M of zinc chloride (ZnCl₂) solutions and pyrolyzed at different temperatures and times. Results indicated that the 1-M ZnCl₂-immersed biosolids pyrolyzed at 500 °C for 30 min could be reused and were optimal biosolid adsorbents for benzene adsorption. Pore volume distribution analysis indicated that the mesopore contributed more than the macropore and micropore in the biosolid adsorbent. The benzene adsorption capacity of the biosolid adsorbent was 65 and 55% of the G206 (granular-activated carbon) and BPL (coal-based activated carbon; Calgon, Carbon Corp.) activated carbons, respectively. Data from the adsorption and desorption cycles indicated that the benzene adsorption capacity of the biosolid adsorbent was insignificantly reduced compared with the first-run capacity of the adsorbent; therefore, the biosolid adsorbent could be reused as a commercial adsorbent, although its production cost is high.     

Reliability of solid phase microextraction in estimating bioavailability of pyrene in soil

Solid phase microextraction (SPME) coupled with gas chromatography was employed to estimate bioavailability of pyrene in soils with different properties of textures, organic matter contents (SOM) and aging periods. Experimental results indicated that biodegradation rates increased from 0.10 (sandy loam) to 0.15 (silty loam) microg g-1 hr1. By contrast, biodegradation rate decreased from 0.10(1.3% SOM) to 0.04 (7.6% SOM) microg g-1hr1. The amounts of pyrene biodegraded decreased 27% when SOM was modified from 1.3 to 7.6%, indicating that distributions of pyrene in soils at biodegradation end points were affected by the SOM. Sequestration as measured by sonication extraction had evidently occurred in aged soil samples. SPME measurements slightly overestimated the amount of pyrene degraded by indigenous and seeded microorganisms, in soils with the different properties (correlation coefficient, R2= 0.74). The present study demonstrates that the SPME method can not replace biodegradation tests commonly used for predicting bioremediation efficacy.