Rapid measurement of emissions from military aircraft turbine engines by downstream extractive sampling of aircraft on the ground: Results for C-130 and F-15 aircraft

Aircraft emissions affect air quality on scales from local to global. More than 20% of the jet fuel used in the U.S. is consumed by military aircraft, and emissions from this source are facing increasingly stringent environmental regulations, so improved methods for quickly and accurately determining emissions from existing and new engines are needed. This paper reports results of a study to advance the methods used for detailed characterization of military aircraft emissions, and provides emission factors for two aircraft: the F-15 fighter and the C-130 cargo plane. The measurements involved outdoor ground-level sampling downstream behind operational military aircraft. This permits rapid change-out of the aircraft so that engines can be tested quickly on operational aircraft. Measurements were made at throttle settings from idle to afterburner using a simple extractive probe in the dilute exhaust. Emission factors determined using this approach agree very well with those from the traditional method of extractive sampling at the exhaust exit. Emission factors are reported for CO₂, CO, NO, NO_x, and more than 60 hazardous and/or reactive organic gases. Particle size, mass and composition also were measured and are being reported separately. Comparison of the emissions of nine hazardous air pollutants from these two engines with emissions from nine other aircraft engines is discussed.     

A correction to: biological and oceanographic insights from larval labrid (Pisces: Labridae) identification using mtDNA sequences

Previously published mtDNA cytochrome b sequences for Xyrichtys novacula (Linnaeus) and two morphologically distinct types of Xyrichtys larvae (Pisces: Labridae) included human cytochrome b sequence, presumably due to sample contamination and/or poor preservation of sample DNA. Those sequences had been used to identify the two types of Xyrichtys larvae as X. novacula, but owing to the contamination, the identifications are invalid. Fresh specimens were collected: X.␣martinicensis (Cuvier and Valenciennes), X. novacula, X. splendens (Castelnau), and Xyrichtys sp. larvae of each of the two morphotypes (dorsal-forward eye and ventral-forward eye). The cytochrome b fragment was amplified from each specimen using the polymerase chain reaction. Comparison of the sequences with human cytochrome b sequence confirmed that the new sequences were not contaminated. The interspecific differences in Xyrichtys sequences were less than previously reported, but still greater than observed in many fish genera. Distance and parsimony analyses indicated that X. novacula and X. martinicensis were more closely related to each other than to X. splendens. This conclusion differs from our previous conclusion that X. martinicensis and X. splendens were more closely related to each other than to X. novacula. Distance and parsimony analyses also demonstrated that both larval morphotypes were X. novacula and, thus, our previous conclusions regarding larval ecology and oceanographic transport remain unchanged. Received: 12 March 1997 / Accepted: 24 October 1997     

Environmental Technology Verification (ETV) test of dioxin emission monitors

The performance of four dioxin emission monitors, including two long-term sampling devices, the Dioxin-MonitoringSystem (DMS) and AMESA (the adsorption method for sampling dioxins and furans), and two semireal-time continuous monitors, the resonance ionization with multimirror photon accumulation time-of-flight mass spectrometer (RIMMPA-TOFMS) and the jet resonance-enhanced multiphoton ionization (jet-REMPI) system were tested. A package boiler burning a simulated chlorinated hazardous waste was used for a total of nine tests. Reference samples were collected during each test and analyzed for polychlorinated dibenzodioxins and dibenzofurans (PCDDs/Fs) using gas chromatography mass spectrometry. The PCDD/F concentrations of the reference samples measured by EPA Method 23 ranged from 0.9 to 6.0 ng toxic equivalence (TEQ)/dry standard cubic meter. The relative accuracies achieved by DMS, AMESA, and jet-REMPI varied from 22.6% to 78.2%, with 100% data completeness. The RIMMPA-TOFMS produced no quantifiable results due to various difficulties associated with the instrument during the testing. The two long-term samplers were easy to install and operate and provided a cumulative, averaged emission for the sampling period. The operations of the two semi-real-time continuous monitors were relatively complex, but one of them provided on-site, real-time data for PCDD/F emissions from measurement of a TEQ correlative indicator compound. This article summarizes results from the individual Environmental Technology Verification reports for the four dioxin monitors. This work was presented, in part, at the Fourth International Conference on Combustion, Incineration/Pyrolysis and Emission Control (i-CIPEC)     

Structural and chemical analysis of marine aggragates: in situ macrophotography and laser confocal and electron microscopy

Marine-snow aggregates are compositionally diverse macroparticles that dominate the vertical material flux in many open-ocean environments. There is little documentation of the detailed physical structure and microcomposition of marine-snow aggregates, yet such characteristics both influence and are a function of aggregation mechanisms. This paper describes the application of in situ macrophotography followed by laser-scanning confocal microscopy (LSCM) as a means of observing the fine structure of delicate marine-snow aggregates in their fully hydrated state. Use of pecific fluorescent stains yielded microcompositional images, and addition of analytical scanning electron microscopy allowed analysis of subcomponent particles within the aggregates. Application of these techniques to structurally diverse aggregates collected from the oligotrophic North Pacific surface waters revealed large variations in structure, density, relative homogeneity, extracellular matrix material, abundance and type of phytoplankton, and organic and mineral microcomposition.     

Transparent exopolymer particles in a deep-sea hydrothermal system: Guaymas Basin,Gulf of California

This is the first report of transparent exopolymer particle (TEP) concentrations within deep-sea hydrothermal vent systems using colorimetric methods, measuring TEP in supernatants of sediments surrounding the vents, in fluids emanating directly from hydrothermal vents and in neutrally buoyant hydrothermal plumes. Samples were collected at Guaymas Basin (Gulf of California), a sedimented hydrothermal system. TEP concentrations within the hydrothermal fluids were significantly greater than the only other report of TEP in deep water. The range of values for TEP abundance were 8–6,451 μg/L of gum xanthan equivalents, the highest values being associated with supernatants of microbial mat-covered sediments. The potential sources and significance of the high concentrations of TEP observed in this deep-sea hydrothermal environment are discussed.     

Chemical Plume Tracing

Environmental Fluid Mechanics -     

Influence of Suspended Clay Minerals and Humic Matter on the Solid Phase Extraction Efficiency of Selected Pesticides from Water

The purpose of this investigation was to determine the influence of humic acids (HA) and Ca-montmorillonite (CaM) on the solid-phase extraction (SPE) efficiency of atrazine, alachlor and α-cypermethrin from water samples at various pH-values. The nature and intensity of binding of the studied pesticides to CaM were determined by X-ray diffraction analysis and termogravimetric analysis (TGA) test. The studied pesticides eluted from discs were analysed by thin-layer chromatography (TLC). The effects of CaM and humic acid were generally pH-dependent and acted independently in extraction efficiency influence. Lower recovery of pesticides was observed at higher pH values when CaM was ≥0.1 g and was attributed to greater dispersion of clay, increased surface area and subsequent adsorption. Concentrations of dissolved organic carbon (DOC) in humic acid had less effect on the extraction efficiency when water was at pH 8 compared to water at pH 2, which was probably due to greater nonpolar interactions of the pesticides to the charge-neutralized humic acid molecule.     

Biological and oceanographic insights from larval labrid (Pisces: Labridae) identification using mtDNA sequences

Polymerase chain reaction and direct comparison of mitochondrial DNA sequences from a cytochrome b gene fragment were used to identify two morphologically distinct larval types ofXyrichtys, a genus of tropical wrasse (Pisces: Labridae). Both larval types were collected during ichthyoplankton surveys on the Middle Atlantic Bight shelf in the summer of 1988. DNA sequence comparisons indicated that both types were larvae ofXyrichtys novacula (Linnaeus). Back-calculated birthdate distributions for those larvae collected on the Middle Atlantic Bight shelf demonstrated that the two larval types formed two distinct cohorts indicating a biological difference. The two distinct larval types may be a consequence of an ecophenotypic effect, or they may represent offspring from genetically distinct populations. These results emphasize that important biological and oceanographic information can be gained through the use of the polymerase chain reaction and DNA sequencing for larval identificaiton.