A comparison of results from two test methods for assessing the toxicity of aminotriazole to Selenastrum capricornutum

Two different test methods for assessing the toxicity of aminotriazole to Selenastrum capricornutum are compared. Growth medium composition is demonstrated to have a significant effect on the toxicity of aminotriazole.     

Response of a solid-liquid two-phase partitioning bioreactor to transient BTEX loadings

A two-phase partitioning bioreactor (TPPB) consisting of an aqueous phase containing a bacterial consortium and a polymeric phase of silicone rubber pellets (solid volume fraction 0.1) was used to treat a gaseous waste stream containing benzene, toluene, ethylbenzene and o-xylene (BTEX). The function of the solid polymer phase was to absorb/desorb the gaseous volatile organic compounds providing a buffering effect to protect the cells from high transient loadings and to sequester the BTEX for subsequent degradation. The TPPB was subjected to high and fluctuating inlet loadings of BTEX in the form of 4h step changes of 2, 4, 6 and 10 times the nominal inlet loading of 60 gm(-3) h(-1) total BTEX in approximately equal amounts, and removal efficiencies and elimination capacities were determined. It was found that overall removal efficiencies of greater than 95% can be achieved while obtaining overall elimination capacities of up to 282 gm(-3) h(-1) during transient operation and TPPB operation succumbs to toxic substrate levels between step changes of 6 and 10 times the nominal loading value (360-600 gm(-3) h(-1)). BTEX concentrations in the aqueous phase and the polymer phase of the TPPB were monitored throughout the imposed step changes to determine the extent to which the sequestering phase can buffer the aqueous phase from BTEX. With the polymer phase comprising only 10% of the total working volume of the reactor, the polymer beads accounted for up to 93%, 91% and 70% of the total BTEX present in the working volume for step changes of 2, 4 and 6 times the nominal loading, respectively.     

Octachlorodibenzo-p-dioxin in wood treatment materials and treated wood

The octachlorodibenzo-p-dioxin (OCDD) concentrations have been determined in aged samples of commercial pentachlorophenol (PCP), in wood protection formulations containing PCP and in wood treated with PCP as a preservative or as an anti-sapstain treatment. The concentrations of OCDD found in the various samples are within the range expected from the amount of commercial PCP initially present in the samples. In view of the known stability of OCDD the results are interpreted as indicating that the formulation, treatment and ageing processes have not led to any substantial conversion of PCP to OCDD; although one result indicates that outdoor exposure of treated samples increased the OCDD concentration by a factor of approximately 2 after $\text{3}\text{1}\text{2}$ years. Analysis of aged samples of treated wood indicate that OCDD is lost much less rapidly from the wood than PCP.     

Remediation of PAH contaminated soils: application of a solid-liquid two-phase partitioning bioreactor

The feasibility of a two-step treatment process has been assessed at laboratory scale for the remediation of soil contaminated with a model mixture of polycyclic aromatic hydrocarbons (PAHs) (phenanthrene, pyrene, and fluoranthene). The initial step of the process involved contacting contaminated soil with thermoplastic, polymeric pellets (polyurethane). The ability of three different mobilizing agents (water, surfactant (Biosolve) and isopropyl alcohol) to enhance recovery of PAHs from soil was investigated and the results were compared to the recovery of PAHs from dry soil. The presence of isopropyl alcohol had the greatest impact on PAH recovery with approximately 80% of the original mass of PAHs in the soil being absorbed by the polymer pellets in 48 h. The second stage of the suggested treatment involved regeneration of the PAH loaded polymers via PAH biodegradation, which was carried out in a solid-liquid two-phase partitioning bioreactor. In addition to the PAH containing polymer pellets, the bioreactor contained a microbial consortium that was pre-selected for its ability to degrade the model PAHs and after a 14 d period approximately 78%, 62% and 36% of phenanthrene, pyrene, and fluoranthene, respectively, had been desorbed from the polymer and degraded. The rate of phenanthrene degradation was shown to be limited by mass transfer of phenanthrene from the polymer pellets. In case of pyrene and fluoranthene a combination of mass transfer and biodegradation rate might have been limiting.     

Biphenyl degradation kinetics by Burkholderia xenovorans LB400 in two-phase partitioning bioreactors

Biphenyl could be successfully degraded by Burkholderia xenovorans LB400, initially described as Pseudomonas sp. LB400, in two-phase partitioning bioreactors (TPPBs). TPPBs are comprised of an aqueous, cell containing phase, and an immiscible, biocompatible organic phase that partitions toxic and/or poorly soluble substrates (in this case biphenyl) based on maintaining a thermodynamic equilibrium. The critical LogKO/W of the organism was found to be approximately 5.5, indicating that solvents with a LogKO/W larger than 5.5 are suitable as delivery phases for B. xenovorans LB400. Two solvents selected for the TPPB system were octadecene and bis(2-ethylhexyl)sebacate (BES). In one experiment a total of 6.6 g biphenyl per l aqueous-phase-equivalent (biphenyl delivered in solvent, at an aqueous phase to solvent ratio of 10) could be degraded in 25 h during batch operation with octadecene. The specific growth rate and the half saturation constant of the Monod model were estimated to be mumax=0.25 h-1 and KS=0.0001 g l-1, and the yield coefficient was YX/S=0.48 g biomass per g biphenyl. These parameter estimates were used to predict the time course of biphenyl degradation at different initial substrate concentrations and with biphenyl delivered from the two solvents with different partitioning behaviour for biphenyl. The predictions were validated by experimental data, confirming the microbial kinetics as well as the expected partitioning effects.     

Operation of a two-phase partitioning bioreactor for the oxidation of anthracene by the enzyme manganese peroxidase

A study was conducted to determine the potential of a two-phase partitioning bioreactor (TPPB) for the treatment of a poorly soluble compound, anthracene, by the enzyme manganese peroxidase (MnP) from the fungus Bjerkandera sp. BOS55. Silicone oil was used as the immiscible solvent, which contained anthracene at high concentrations. The optimization of the oxidation process was conducted taking into account the factors which may directly affect the MnP catalytic cycle (the concentration of H(2)O(2) and malonic acid) and those that affect the mass transfer of anthracene between the organic and the aqueous phase (solvent and agitation speed). The main objective was carried out in terms of improved efficiency, i.e., maximizing the anthracene oxidized per unit of enzyme used. The TPPB reached nearly complete oxidation of anthracene at a conversion rate of 1.8mgl(-1)h(-1) in 56h, which suggests the application of enzymatic TPPBs for the removal of poorly soluble compounds.     

Analysis of polychlorobiphenyls from used transformers for polychlorodibenzofurans

The results of analyses for polychlorodibenzofuran (PCDF) content in two samples of polychlorobiphenyl (PCB) from used electrical transformers are presented and discussed. In neither sample was there evidence for enhanced PCDF concentrations even though one of them had been subjected to overheating while in service.     

Polychlorodibenzo-p-dioxins and dibenzofurans in technical pentachlorophenol - results of a collaborative analytical exercise

Results of analyses of eight samples of technical pentachlorophenol conducted by three different analytical methods are presented and discussed.     

An investigation of aqueous activity coefficients at low concentrations

The activity of a chemical in solution determines its tendency to move into other media. At low concentrations (<0.01M) it is generally considered to be linearly related to concentration. A hypothetical model based on the structure of liquid water is discussed which could cause deviations from this linearity in the ppb region, a concentration much lower than that normally investigated thermodynamically, but one of great importance environmentally. Headspace experiments are reported with carbon tetrachloride and chloroform in water at concentrations down to ～10^?3 ppb but no such deviations were discerned.