Application of CGP-cross route process for microstructure refinement and mechanical properties improvement in steel sheets

A modified method of severe plastic deformation (SPD) entitled constrained groove pressing-cross route (CGP-CR) was introduced for imposing a high magnitude of equivalent strain of about 2.32 per pass on the sheet form samples. The major benefit of this improved route compared to previous common route was the more homogeneity of strain in the rolling (RD) and transverse (TD) directions of sheets. In this study, low carbon steel samples were used for examination of evolutions in microstructure and mechanical properties during SPD via CGP-CR process. Mechanical properties improvement were measured by tensile and macro hardness tests. The results indicate that CGP-CR process can effectively improve tensile strength; and also, yield stress and hardness of as-received low carbon steel samples were improved up to about 100% after two deformation passes. Also, high magnitude of inhomogeneity can be observed in hardness distribution through first pass of the process which diminishes in the subsequent passes. Microstructural evolutions during process were monitored by optical microscopy observations and X-ray diffraction analysis. The results demonstrate that initial ferritic microstructure with grain size of about 30 μm was refined to a 225 nm cell structure after two passes of CGP-CR process.     

Removal and recovery of copper and nickel ions from aqueous solution by poly(methacrylamide-co-acrylic acid)/montmorillonite nanocomposites

Nanocomposite hydrogels based on poly(methacrylamide-co-acrylic acid) and nano-sized montmorillonite were prepared by aqueous dispersion and in situ radical polymerization. Optimum sorption conditions were determined as a function of montmorillonite content, contact time, pH, and temperature. The equilibrium data of Cu²⁺ and Ni²⁺ conformed to the Freundlich and Langmuir isotherms in terms of relatively high regression values. The maximum monolayer adsorption capacity of the nanocomposite hydrogel (with 3 wt% montmorillonite content), as obtained from the Langmuir adsorption isotherm, was found to be 49.26 and 46.94 mg g^?1 for Cu²⁺ and Ni²⁺, respectively, at contact time?=?60 min, pH?=?6.8, adsorbent dose?=?100 mg/ml, and temperature?=?318 K. Kinetic studies of single system indicated that the pseudo-second order is the best fit with a high correlation coefficient (R ²?=?0.97–0.99). The result of five times sequential adsorption–desorption cycle shows a good degree of desorption and a high adsorption efficiency.     

Economic complexity,ICT, biomass energy consumption,and environmental degradation: evidence from Iran

Economic complexity, biomass energy consumption, and information communication technology (ICT) have diverse impacts on energy consumption and carbon dioxide (CO₂) emissions. Nevertheless, analysis of these variable effects is not addressed in the previous literature; the antiqueness of this article is stuffing this gap. This study assessed the relationship between gross domestic product (GDP) per capita, biomass consumption, economic complexity index (ECI), ICT, and CO₂ emissions in Iran in 1994–2018. The autoregressive distributed lag (ARDL) model and the quantile regression (QR) econometric technique were used to investigate the factors affecting CO₂ emissions in the tails of the conditional distribution. The share of each influential factor was predicted through the variance decomposition analysis (VD) for the next 10 years. The empirical results showed a long-run relationship between the variables. So, the variables of biomass consumption, ECI, and ICT improve the quality of the environment in Iran by reducing CO₂ emissions, and the per capita GDP variable increases CO₂ emissions. Results suggest no evidence indicating the presence of environmental Kuznets curve (EKC); however, QR demonstrated the existence of EKCs in the lower quantiles of the conditional distribution. The ECI will have the most share to change the CO₂ emissions in the future. The income threshold should be determined at the turning point of the EKC to increase economic development. Moreover, investing in increasing biomass consumption is vital. Policymakers also need to consider strict added value for the export of products.

     

Thallium(I) and thallium(III) induce apoptosis in isolated rat hepatocytes by alterations in mitochondrial function and generation of ROS

Environmental metal toxins, generated through diverse anthropogenic activities, constitute one of the major contaminants that have led to global dispersion of these toxic metals in the ecosystem. Thallium is one of these widely dispersed metals that produce severe adverse effects on human and biological systems. The influence of thallium(I) and thallium(III) on the early events that trigger apoptosis signaling were examined in freshly isolated rat hepatocytes. In addition, the role of oxidative stress, and mitochondria in the induction of apoptosis were also investigated. Incubation of thallium(I) and thallium(III) with isolated rat hepatocytes generated reactive oxygen species (ROS), collapse of mitochondrial membrane potential, activation of caspases cascade, and appearance of apoptosis phenotype. Mitochondrial permeability transition (MPT) pore sealing agents (cyclosporine A and carnitine) and ATP generators (L-glutamine, fructose, and xylitol) inhibited the activation of caspase-3 and apoptosis, indicating that both the cations activated apoptosis signaling via mitochondrial pathway. Pretreatment of hepatocytes with antioxidants (α-tocopherol or deferoxamine) also blocked caspase-3 activation induced by these cations, suggesting that oxidative stress may be directly involved in a mitochondrial MPT pore opening and activation of caspases cascade. These findings contribute to a better understanding of the mechanisms that mediate thallium-induced apoptosis in isolated rat hepatocytes.     

Cigarette butt littering consequences: a study of pollution rate on beaches and urban environments

Cigarette butts are hazardous wastes that are not properly discarded by most smokers. They are one of the most abundant litters in the environment and a threat to various organisms because they leak numerous pollutants. This study aimed to assess the distribution of cigarette butts in a coastal city south of the Caspian Sea in Mazandaran Province, Iran. Observations were performed using the visual survey technique based on standardized protocol. The results showed 11,261 littered cigarette butts in 15 studied urban areas ( an average of 0.306 units per square meter). Also, the average density of littered cigarette butts on the studied beaches was 0.106 per square meter. The littered cigarette butts had significant spatial variation, and the number of counts was 135 to 2090. The land-use has a significant effect on the density of littered cigarette butts due to its population density. The inquiry’s index demonstrated that 33.3% of the studied urban areas are high pollution and severe pollution, while all beaches are high and severe. Therefore, a significant focus must be considered to reduce cigarette butts littering due to the collection problems and challenges of cigarette butt management. Because the pollution on the beaches is higher than in urban areas, improving waste management services and establishing a regular cleaning program are essential.

     

An integrated multi criteria approach for landfill siting in a conflicting environmental, economical and socio-cultural area

Landfill site selection is a complicated multi criteria land use planning that should convince all related stakeholders with different insights. This paper addresses an integrating approach for landfill siting based on conflicting opinions among environmental, economical and socio-cultural expertise. In order to gain optimized siting decision, the issue was investigated in different viewpoints. At first step based on opinion sampling and questionnaire results of 35 experts familiar with local situations, the national environmental legislations and international practices, 13 constraints and 15 factors were built in hierarchical structure. Factors divided into three environmental, economical and socio-cultural groups. In the next step, the GIS-database was developed based on the designated criteria. In the third stage, the criteria standardization and criteria weighting were accomplished. The relative importance weights of criteria and subcriteria were estimated, respectively, using analytical hierarchy process and rank ordering methods based on different experts opinions. Thereafter, by using simple additive weighting method, the suitability maps for landfill siting in Marvdasht, Iran, was evaluated in environmental, economical and socio-cultural visions. The importance of each group of criteria in its own vision was assigned to be higher than two other groups. In the fourth stage, the final suitability map was obtained after crossing three resulted maps in different visions and reported in five suitability classes for landfill construction. This map indicated that almost 1224 ha of the study area can be considered as best suitable class for landfill siting considering all visions. In the last stage, a comprehensive field visit was performed to verify the selected site obtained from the proposed model. This field inspection has confirmed the proposed integrating approach for the landfill siting.     

Portland cement solidified construction waste using MSW leachate and phosphate admixtures

Journal of Material Cycles and Waste Management - Many dumping sites all over the world release leachate into the environment. The primary goal of this study was to convert raw municipal...