Limitations in the determination of maximum residue limits and highest residues of pesticides: Part I

The pesticide usages are controlled by comparing residue concentrations in treated commodities to legally permitted maximum levels (MRLs) determined based on supervised trials designed to reflect likely maximum residues occurring in practice following authorised use. The number of trials available may significantly affect the accuracy of estimated maximum residues. We conducted a study with synthetic lognormal distributions with mean of 1 and standard deviations of 0.8 and 1.0, which reflect the residue distributions observed in practice. The likely residues in samples were modelled by drawing random samples of size 3, 5, 10 and 25 from the synthetic populations. The results indicate that the estimations of highest residues (HR), used for calculation of short-term intake, and the MRLs, serving as legal limits, are very uncertain based on 3–5 trials indicated by the calculated HR_0.975/HR_0.025 and MRL_0.975/MRL_0.025 ratios of 12 and 9, and 13 and 10, respectively, which question the suitability of such trials for the intended purpose. As the 95% range of HR and MRL rapidly decreases with number of trials, ideally ≥15 but minimum 6–8 trials should be used for estimation of HR and MRL according to the current typical practice of Codex Alimentarius.     

Application of activated sludge model no. 3 for the modeling of organic matter biodegradation at thermophilic temperatures.

The primary aim of our research was to investigate the applicability of activated sludge models (ASM) for aerobic thermophilic processes, especially autothermal thermophilic aerobic digestion (ATAD). The ASM3 model (Gujer et al., 1999) theoretically seems to be the most suitable, because storage plays an important role in a batch-feed cycle system like ATAD. The ASM3 model was extended with an activation step of the thermophilic organisms. This model was calibrated and verified by independent test results, demonstrating its ability to describe the process. The growth (microH = 26.04 day(-1)), storage (k(STO) = 20.39 day(-1)), hydrolysis (kH = 11.15 day(-1)) and decay rates (b 9H,O2) = 1.28 day(-1), b(STO,O2 = 1.10 day-1)) obtained from calibration are significantly higher at 55 degrees C than at mesophilic temperatures, justifying the faster metabolism at higher temperatures. An inert fraction of the biomass (characterized by the model parameter f(i) = 0.4) was found to be significantly greater than in the mesophilic case. This can be attributed to the lower diversity of the thermophilic species and thus to their narrower substrate spectra.     

Factors influencing cannibalism in the wolf spider Pardosa agrestis (Araneae, Lycosidae)

Cannibalistic tendencies are well known in spiders and may be a significant factor influencing population size. The wolf spider, Pardosa agrestis, is the dominant non-web-building spider in a wide range of central European agricultural habitats. Preliminary field observations indicated an extended reproductive period, which results in a very wide size distribution of juvenile instars. We hypothesised that if cannibalism is enhanced by differences in size, especially during periods when prey is scarce, these populations might be susceptible to cannibalism in an ecologically significant way. Laboratory studies were conducted on juvenile P. agrestis in arenas. We analysed the following specific aspects of cannibalism: (1) the effect of the weight ratio between the opponents; (2) the effect of weight per se, and (3) the role of hunger level in determining cannibalistic tendencies of spiders. The role of weight and hunger were analysed in separate experiments, in both cases by controlling for the other variable. The results showed that cannibalism was strongly positively correlated with both weight ratio and hunger, but absolute size/age of an individual could not predict the occurrence of a cannibalistic event. These experiments generated the plausible hypothesis that cannibalism might be an important phenomenon in the regulation of real populations, which should be tested specifically in future field experiments. Received: 15 December 1997 / Accepted after revision: 10 October 1998     

Das schwere Wasserstoffisotop

The Science of Nature -     

Role of the vitamin E model compound Trolox in the prevention of Cr(VI)-induced cellular damage

Given the wide industrial use of chromium (Cr) and its environmental contamination, chromium represents a risk to humans exposed to the metal. Considering that Cr(VI) is a potent oxidizing agent that increases intracellular oxidation and DNA damage, it would be worth considering the pretreatment of cells with antioxidants as a means of preventing Cr(VI)-induced toxicity. The objective of this study was to pretreat yeast cells with the water-soluble vitamin E analogue Trolox in an effort to increase cell tolerance against reactive chromium and reactive oxygen species formed during Cr(VI) reduction. Results revealed a decrease in Cr(VI)-induced cytotoxicity and mitotic gene conversions in Trolox-pretreated cells. The protective effect of Trolox in Cr(VI) induced genotoxicity was confirmed also with the prokaryotic Salmonella typhimurium SOS/umu test. Pretreatment of cells with Trolox (1) increased total Cr bioaccumulation, (2) decreased Cr(VI)-induced intracellular oxidation, (3) decreased Cr(V) persistence and (4) increased OH^? formation in yeast extracts. These findings might be useful in directing future investigations concerning the use of Trolox as a human antioxidant supplement, and in clinical applications related to Cr-induced genotoxicity in occupational and environmental situations where chromium is a problem.     

A spatial clustering perspective on autocorrelation and regionalization

We revisit one of the classical problems in geography and cartography where multiple observations on a lattice (N) need to be grouped into many fewer regions (G), especially when this number of desired regions is unknown a priori. Since an optimization through all possible aggregations is not feasible, a hierarchical classification scheme is proposed with an objective function sensitive to spatial pattern. The objective function to be minimized during the assignment of observations to regions (classification) consists of two terms: the first characterizes accuracy and the second, model complexity. For the latter, we introduce a spatial measure that characterizes the number of homogeneous patches rather than the usual number of classes. A simulation study shows that such a classification procedure is less sensitive to random and spatially correlated error (noise) than non-spatial classification. We also show that for conditional autoregressive error (noise) fields the optimal partitioning is the one that has the highest within-units generalized Moran coefficient. The classifier is implemented in ArcView to demonstrate both a socio-economic and an environmental application to illustrate some potential applications.

Determination of selected neonicotinoid insecticides by liquid chromatography with thermal lens spectrometric detection

We studied the analysis of trace amounts of neonicotinoid insecticides by liquid chromatography coupled with a thermal lens spectrometric detector (TLS). This multi-residue analysis method is based on the reversed phase separation on C₁₈ column, isocratic elution and collinear dual beam TLS detection. The insecticides thiamethoxam, imidacloprid, acetamiprid and thiacloprid were detected with retention times of 4.4, 5.7, 6.5 and 8.5 min and limits of quantifications of 50, 89, 10, and 25 μg/L, respectively. The retention times agreed well with those obtained by the same chromatographic method but using a diode-array detector (DAD). The limits of quantifications for imidacloprid were identical in both techniques. However, the limits of quantifications for thiamethoxam, acetamiprid and thiacloprid were up to 8.5 times lower using the TLS detector compared to the diode-array detector. The applicability of the developed procedure was tested on spiked river water and potato samples.