São Paulo Aerosol Characterization Study

Abstract

The São Paulo Metropolitan area (SPMA) is characterized as having one of the worst air pollution problems in Brazil,with frequent violations of air quality standards for particulate matter. This paper presents the results of a eceptor model source apportionment study carried out to develop a quantitative database on which a control strategy could be developed. The study was conducted in four sites with distinct land uses. Fine, coarse (CP), and total suspended particles (TSP) samples were collected on Teflon and glass filters and analyzed by x-ray fluorescence XRF), ion chromatography, and thermal evolution. The sources were characterized by similar methodology. Chemical mass balance (CMB) receptor modeling indicated that carbonaceous material plays an important role in the aerosol composition; that the three major source categories contributing to the fine particles are vehicles, secondary carbon, and sulfates; and that the main contributors to CP and TSP are road dust and vehicles. All sampling sites presented the same general pattern in terms of source contribution, although this contribution varied from site to site.     

Photocatalytic degradation of chlorophenols using Ru(bpy) 3 2+ /S2O 8 2−

Advanced oxidation processes, such as photocatalysed oxidation, provide an important route for degradation of wastes. In this study, the lowest excited state (³MLCT) of Ru(bpy)₃²⁺ is used to break down chlorophenol pollutant molecules to harmless products. This has the advantage of using visible light and a short-lived catalytically active species. Photolysis of deaerated aqueous solutions of a variety of mono- and poly-substituted chlorophenols has been followed in the presence of Ru(bpy)₃²⁺/S₂O₈²⁻ with near visible light (λ > 350 nm) by UV/visible absorption spectroscopy, luminescence, potentiometry, NMR and HPLC techniques. Upon irradiation, a decrease is observed in the chlorophenol concentration, accompanied by the formation of Cl⁻, H⁺ and SO₄²⁻ ions as the main inorganic products. Benzoquinone, phenol, dihydroxybenzenes and chlorinated compounds were the dominant organic products. As the ruthenium(II) complex is regenerated in the reaction, the scheme corresponds to an overall catalytic process. The kinetics of the rapid chlorophenol photodechlorination has been studied, and are described quite well by pseudo-first order behaviour. Further studies on this were made by following Cl⁻ release with respect to the initial Ru(bpy)₃²⁺ and S₂O₈²⁻ concentrations. A comparison is presented of the photodechlorination reactivity of the mono and polychlorophenols studied at acidic and alkaline pH.     

Bioaccumulation and depuration of chromium in the selected organs and whole body tissues of freshwater fish Cirrhinus mrigala individually and in binary solutions with nickel

Contamination of aquatic ecosystems with heavy metals has been receiving increased worldwide attention due to their harmful e ects on human health and other organisms in the environment. Most of the studies dealing with toxic e ects of metals deal with single metal species, while the aquatic organisms are typically exposed to mixtures of metals. Hence, in order to provide data supporting the usefulness of freshwater fish as indicators of heavy metal pollution, it has been proposed in the present study to investigate the bioaccumulation and depuration of chromium in the selected organs of freshwater fingerlings Cirrhinus mrigala, individually and in binary solutions with nickel. The results show that the kidney is a target organ for chromium accumulation, which implies that it is also the “critical” organ for toxic symptoms. The results further show that accumulation of nickel in all the tissues of C. mrigala is higher than that of chromium. In addition, the metal accumulations of the binary mixtures of chromium and nickel are substantially higher than those of the individual metals, indicating synergistic interactions between the two metals. Theoretically the simplest explanation for an additive joint action of toxicants in a mixture is that they act in a qualitatively similar way. The observed data suggest that C. mrigala could be suitable monitoring organisms to study the bioavailability of water-bound metals in freshwater habitats.     

Application of environmentally conscious manufacturing strategies for an automotive component

Application of appropriate environmentally conscious manufacturing strategies enables the sustainable development of products and processes. Automotive component manufacturers recognise the potential of applying appropriate strategies for attaining Triple Bottom Line benefits. In this context, three strategies such as eco-efficiency, waste minimisation and material efficiency are being applied to minimise environmental impacts associated with the manufacture of automotive products and its associated processes. A case study of an automotive component manufacturing firm has been exemplified. After conducting the study, the potential environmental impact was reduced by 20% and eco-efficiency was improved by 13%. Further, improvements have been observed in terms of overall resource consumption and material efficiency. The overall power consumption was reduced by 18% and weight of the component was reduced by 11%. The study aimed at improving the sustainable performance of product by incorporating green and environmentally friendlier manufacturing practices.

Abbreviations: USEPA: United Nations Environmental Protection Agency; OECD: Organisation for Economic Co-operation and Development; WBCSD: World Business Council for Sustainable Development; Eco-QFD: Environmental Quality Function Deployment; WCED: World Commission on Environment and Development; LCA: Life Cycle Assessment     

Insights into PU/EVA Blends Produced Using Industrial Residues Towards Eco-efficient Materials

Journal of Polymers and the Environment - Aiming at minimizing the issues associated with the disposal of polymers, in this study, elastomeric materials derived from 100% recycled feedstocks were...     

Bioaccumulation of lead and the influence of chelating agents in Catla catla fingerlings

Lead is a widespread element and one of the persistent and cumulative pollutants of the environment. The present study deals with the bioaccumulation of lead and the influence of chelating agents, meso 2,3-dimercaptosuccinic acid (DMSA), D-Penicillamine and CaNa₂EDTA in reducing the concentration of lead on the selected organs of Catla catla fingerlings for both acute and chronic exposures by using ICP-AES. It is inferred from the present findings that there was a correlation between environmental conditions and the heavy metal contents of the fish. The highest concentration of lead is found in kidney tissues and the lowest in muscle tissues. The accumulation pattern of lead in the selected organs of Catla catla is: kidney > liver > gill > brain > muscle. Also, it has been found that the treatment of chelating agents, DMSA, D-Penicillamine and CaNa₂EDTA reduces the concentration of lead significantly for both acute and chronic exposures. The results also show that DMSA is the most effective chelator of lead in reducing the body burden of C. catla fingerlings. The observed data further indicate that C. catla could be suitable for monitoring organisms to study the bioavailability of water-bound metals in freshwater habitats.     

Accumulation of trace elements in the peripheral and central parts of two species of epiphytic lichens transplanted to a polluted site in Portugal

This paper compares the dynamics, i.e. the rates of change in element concentrations of young and older lichen thallus parts, of one foliose and one fruticose lichen, during a transplant experiment to a polluted site. Both lichen parts respond to environmental changes. Here, differential accumulation suggests that differential constitution leads to differential uptake and release, and/or the overall behaviour is partly due to internal translocation and regulation mechanisms within the whole lichen. For thallus parts, internal translocation should be taken into account as one more factor affecting lichen “memory length”. Young parts of the thallus presented higher rates of change, but different lichen parts accumulate different elements to different extents. Therefore tissue selection in monitoring may depend on the element of interest, and cannot be made into a generalized approach in survey set-ups: the choice depends on the element.     

On the influence of faulting on small-scale soil-gas radon variability: a case study in the Iberian Uranium Province

In order to evaluate the influence of faulting on the variability of geogenic radon at detailed scale (1:2000), data on gamma ray fluxes, U and Th concentrations in rocks, radon in soil-gas and radon in groundwater were collected in three target areas on the Oliveira do Hospital region (Central Portugal). This region stands on the Iberian Uranium Province, and is dominantly composed of Hercynian granites and metasedimentary rocks of pre-Ordovician age, crosscut by faults with dominant strike N35°E, N55°E and N75°E. Radiometric anomalies are frequent, associated with faults of the referred systems and metasedimentary enclaves; the analytical data confirms that these anomalies are produced by local high uranium contents in rocks and fault-filling materials (n = 34, range 13-724 ppm), while other radiogenic elements are relatively constant (e.g. Th 4-30 ppm). Radon concentration in soil can be extremely high, up to 12,850 kBq m⁻³ (n = 215), with a large proportion of results above 100 kBq m⁻³. Unsurprisingly, groundwater also shows high radon concentrations, with observed values in the range 150-4850 Bq.L⁻¹ (n = 17). From the results it is concluded that metasedimentary enclaves, as well as faults, can accumulate uranium from circulating fluids, and as a consequence, strongly locally enhance geogenic radon potential. Due to this fact, for the purpose of land use planning in such uranium-enriched regions, very detailed geological mapping is needed to precisely recognize radon high risk areas. A correlation between radon concentration in soil or in groundwater and gamma ray fluxes was established pointing to the possible use of these fluxes as a first step in assessing geogenic radon potential, at least to geological setting similar to the study area.     

Effect of acute concentration of zinc on the biochemical contents of brain of Labeo rohita: an FT-IR study

Heavy metal discharges to aquatic environment are of great concern due to their toxicity and accumulative behavior. Zinc is an essential trace element required for different physiological functions and plays important role in cellular metabolism. However, it becomes toxic when elevated concentrations are introduced into the environment. The aim of this work is to analyze zinc induced biochemical changes in the brain tissues of Labeo rohita fingerlings using Fourier Transformation Infrared Spectroscopy. Several important features have been observed in the zinc intoxicated brain tissues, namely, altered membrane lipid, altered protein profile and decreased glycogen content, indicating an alteration in the lipid and protein profiles leading to modification in membrane composition. Further, it is observed that the acute exposure to zinc causes some alteration in protein profile with a decrease in α-helix and an increase in random coil structures.     

Bioaccumulation behaviour of transplants of the lichen Flavoparmelia caperata in relation to total deposition at a polluted location in Portugal

This experiment compares the short and long time element accumulation behaviour of transplants of Flavoparmelia caperata lichen thalli and total deposition in an atmospheric polluted area. It was found that lichens exposed for a short time behaved differently from lichens in cumulative exposition suggesting the presence of acclimatization behaviour. The lichen transplant elemental content does not unequivocally represent the average or cumulative environmental availability of the exposure period. Reflection characteristics depend on the element and the lichen physiological conditions. Good correlations between lichen elemental contents and total deposition were obtained when a physiological lichen parameter was introduced in a mathematical model, suggesting that metabolically mediated accumulation is important.