Monitoring of water quality inflow and outflow of a farm in Italian Padana plain for rice cultivation: a case study of two years

Environmental Science and Pollution Research - Rice cultivation requires a large use of pesticides and nutrients to control weed proliferation and improve production. The water quality of four...     

HPLC-MSn and GC-MS methods to study sunlight and UV-lamp degradations of 1-amino-5-naphthalene sulfonate

HPLC-DAD, HPLC-MS/MS, GC-MS and spectrophotometric methods are employed to investigate the degradation process of sodium 1-amino-5-naphthalene sulfonate (1A5NS) aqueous solutions, when exposed to sunlight and UV-lamp (254 nm) irradiations. Experimental results show that both sunlight and 254 nm UV-lamp irradiations destroy the chemical and give rise to major degradation products, characterised by the same m/z ratios. Degradation times are lower for sunlight irradiation, for which a t(1/2) value of 137.4 min has been evaluated, in comparison with the value of t(1/2) of 26.8 min, observed for UV-lamp irradiation. The degradation pathway and the structures of the degradation products are proposed.     

Sorption and desorption behavior of chloroanilines and chlorophenols on montmorillonite and kaolinite

The bioavailability of pollutants, pesticides and/or their degradation products in soil depends on the strength of their sorption by the different soil components, particularly by the clay minerals. This study reports the sorption-desorption behavior of the environmentally hazardous industrial pollutants and certain pesticides degradation products, 3-chloroaniline, 3,4-dichloroaniline, 2,4,6-trichloroaniline, 4-chlorophenol, 2,4-dichlorophenol and 2,4,6-trichlorophenol on the reference clays kaolinite KGa-1 and Na-montmorillonite SWy-l. In batch studies, 2.0 g of clay were equilibrated with 100.0 mL solutions of each chemical at concentrations ranging from 10.0 to 200.0 mg/L. The uptake of the compounds was deduced from the results of HPLC-UV-Vis analysis. The lipophilic species were best retained by both clay materials. The most lipophilic chemical used in the study, 2,4,6-trichloroaniline, was also the most strongly retained, with sorption of up to 8 mg/g. In desorption experiments, which also relied on HPLC-UV-Vis technique, 2,4,6-trichloroaniline was the least desorbed from montmorillonite. However, on kaolinite all of the compounds under study were irreversibly retained. The experimental data have been modelled according to the Langmuir and Freundlich isotherms. A hypothesis is proposed concerning the sorption mechanism and potential applications of the findings in remediation strategies have been suggested.     

Sorption of pesticides on kaolinite and montmorillonite as a function of hydrophilicity

Pesticides and other organic species are adsorbed by soil via different mechanisms, with bond strengths that depend on the properties of both the soil and the pesticide. Since the clay fraction in soil is a preferential sorbent for organic matter, reference kaolinite and montmorillonite are useful models for studying the mechanism and the strength of sorption. This paper presents the results of batch experiments to investigate the interactions of kaolinite KGa-1 and montmorillonite SWy-1 with the following pesticides and organic species resulting from the natural degradation of pesticides in the environment: atrazine (1-chloro-3-ethylamino-5-isopropylamino-2,4,6-triazine), simazine (1-chloro-3,5-bisethylamino-2,4,6-triazine), diuron [1,1-dimethyl-3-(3,4-dichlorophenyl)urea], aniline, 4-chlorophenol, 2,4-dichlorophenol, and 2,4,6-trichlorophenol. Each of these chemicals has different hydrophilicity. Systems containing 2.0 g of clay were put in contact with 100.0 mL of solutions of the pesticides at known concentration ranging from 1.0 to 5.0 mg/L, and the amount of solute adsorbed was evaluated through RP-HPLC analysis of the pesticide still present in the aqueous suspension. To test for electrostatic interactions between the clay surface and the pesticides, potentiometric titration was used to determine the permanent surface charge of clays. Experiments were performed at different pH values. The results indicate that, for the chemicals studied, neutral molecules are preferentially retained relative to ionized ones, and that montmorillonite is a more effective sorbent than kaolinite.     

The use of clays to sequestrate organic pollutants. Leaching experiments

Leaching experiments are performed from clay-pollutant systems in order to evaluate the capability of clays to sequestrate organic pollutants from wastewaters. Reference kaolinite KGa-1b, montmorrillonite SWy-2 and reference soil BCR^®-700 are the sorbent materials. 2,4,6-trichloroaniline (2,4,6-TCA) and 4-chlorophenol (4-CP) are the typical pollutants, sorbed at amounts of 10.0 mg g⁻¹ and 5.8 mg g⁻¹ on SWy-2 and 7.3 mg g⁻¹ and 2.2 mg g⁻¹ on KGa-1b, respectively.The leaching agents are ultrapure water and model solutions of acid rain and surface waters that simulate meteoric leaching. 1.0 mM HNO₃, 1.0 mM H₂SO₄ solutions and a methanol/water 50/50 (v/v) mixture simulate leaching agents of industrial source.The results are compared and the preferential capability of the clays to sequestrate the more lipophilic 2,4,6-TCA is evidenced.The bond interactions are discussed and explained through preferential adsorption reactions. For montmorrillonite also a simultaneous intercalation in the phyllosilicate interlayer is proposed.     

Photodegradation of the pure and formulated alpha-cypermethrin insecticide gives different products

Alpha-cypermethrin is a broad-spectrum insecticide widely used in the treatment of rice crops, mainly commercialized as a CONTEST^® formulation. The photodegradation of alpha-cypermethrin and of the commercial formulation has not yet been systematically investigated in paddy water under natural conditions. Here, paddy water solutions of alpha-cypermethrin and CONTEST^® formulation at 5.0 mg L^?1 were irradiated under simulated sunlight for 10 days. Hydrolysis experiments were carried out on the same solutions preserved in the dark. Analysis by ultra-high-performance liquid chromatography–tandem mass spectrometry was developed for the identification of photodegradation products. Results show that degradation of pure alpha-cypermethrin and the formulation counterpart produces both common and different photodegradation products. Five out eleven photodegradation products were identified for the first time, in particular three in the alpha-cypermethrin paddy water solution and four in the formulation. Our findings underline the importance of carrying out photodegradation experiments directly on the commercial formulation, since degradation products could be different from the pure insecticide.     

HPLC-MSn to investigate the oxidative destruction pathway of aromatic sulfonate wastes

The article concerns the problem of destruction and remediation of industrial wastes containing aromatic sulfonates. The effects of an oxidation process induced by thermally activated persulfate in the degradation of 1,5-naphthalenedisulfonate (NDS) are investigated by the use of UV-Vis spectrophotometry, high performance liquid chromatography-mass spectrometry (HPLC-MS) and HPLC-MS(n) techniques. The results obtained indicated that thermal activation (80 degrees C) of a solution containing NDS and sodium persulfate in a molar ratio equal to 1 leads to the cleavage of the naphthalene structure. Estimated chemical oxygen demand (COD) indicates that when the excess of persulfate is equal to 100, NDS undergoes a mineralization of the order of 90%. A degradation pathway undergone by NDS when thermally activated in the presence of persulfate is proposed.