遥感方法应用于湖泊富营养化评价的研究

利用武汉东湖各子湖多年可靠的地面监测资料和1999年9月Landsat—7的TM各波段的卫星遥感数据,建立了各子湖的营养状态指数与TM各波段图像上灰度值之间的关系模型：一元线性模型、多元回归模型。运用这些模型对武汉各湖泊进行富营养化评价。同时基于地面监测资料,用日本学者相崎守弘提出的修正富营养化指数法对武汉主要湖泊的富营养化程度进行评价。结果显示,武汉湖泊多处于中富营养状态,遥感评价结果与地面监测结果基本一致。指出利用遥感方法进行湖泊水体富营养化监测评价是可行的、有效的、利用该方法可进行大范围的湖泊富营养化调查评价。     

镉水质自动在线监测系统的安装和建设

介绍了中国重金属污染物排放现状和镉水质自动在线监测仪的安装运行现状以及重金属在线监测系统相关规范的制定情况,阐述了镉水质自动在线监测仪的分析原理,对基于不同分析原理的仪器进行了性能检验,对监测站房、排污口建设、仪器安装和调试提出了技术要求,同时针对镉水质自动在线监测系统的安装和建设及其相关规范的制定提出了意见和建议.     

Effects of metal and acidic sites on the reaction by-products of butyl acetate oxidation over palladium-based catalysts

Catalytic oxidation is widely used in pollution control technology to remove volatile organic compounds. In this study, Pd/ZSM-5 catalysts with different Pd contents and acidic sites were prepared via the impregnation method. All the catalysts were characterized by means of N2 adsorption- desorption, X-ray fluorescence （XRF）, HE temperature programmed reduction （H2-TPR）, and NH3 temperature programmed desorption （NH3-TPD）. Their catalytic performance was investigated in the oxidation of butyl acetate experiments. The by-products of the reaction were collected in thermal desorption tubes and identified by gas chromatography/mass spectrometry. It was found that the increase of Pd content slightly changed the catalytic activity of butyl acetate oxidation according to the yield of CO2 achieved at 90%, but decreased the cracking by-products, whereas the enhancement of strong acidity over Pd-based catalysts enriched the by-product species. The butyl acetate oxidation process involves a series of reaction steps including protolysis, dehydrogenation, dehydration, cracking, and isomerization. Generally, butyl acetate was cracked to acetic acid and 2- methylpropene and the latter was an intermediate of the other by-products, and the oxidation routes of typical by-products were proposed. Trace amounts of 3-methylpentane, hexane, 2-methylpentane, pentane, and 2-methylbutane originated from iso4merization and protolysis reactions.     

Antimony smelting process generating solid wastes and dust：Characterization and leaching behaviors

A large amount of solid waste has been produced by the antimony smelting process in the＂World Capital of Antimony＂, Xikuangshan area in China. This study comprehensively investigated the physical and chemical characteristics of the various solid wastes, as well as the leaching behavior of the solid wastes, which included water-quenched slag,arsenic-alkali residue, desulfurized slag and blast furnace dust. These four types of waste were enriched in a variety of heavy metals and metalloids and more specifically with As and Sb levels up to 8.6 × 104 and 3.16 × 105mg/kg, respectively, in arsenic-alkali residue. For desulfurized slag and water-quenched slag, the leaching concentration of Sb significantly exceeded the acceptable limits during the leaching tests using the toxicity characteristic leaching procedure and the synthetic precipitation leaching procedure. In addition, As leaching in arsenic-alkali residue was extraordinarily hazardous, being three orders of magnitude higher than the regulatory level of As. According to the results of the extraction tests, all the tested wastes were classified as hazardous waste.     

可持续发展能力建设的理论分析与重构

本文从《２１ 世纪议程》所述的可持续发展能力的解释出发,首次定义了可持续发展能力建设的概念,全面阐术述了能力建设的基本概念和实质内涵;同时,从理论上论述了能力建设的现实意义、能力建设的途径以及能力建设在实施可持续发展战略中基础作用。     

Controlling cyanobacterial blooms by managing nutrient ratio and limitation in a large hypereutrophic lake: Lake Taihu, China

Excessive nitrogen (N) and phosphorus (P) loading of aquatic ecosystems is a leading cause of eutrophication and harmful algal blooms worldwide, and reducing nutrient levels in water has been a primary management objective. To provide a rational protection strategy and predict future trends of eutrophication in eutrophic lakes, we need to understand the relationships between nutrient ratios and nutrient limitations. We conducted a set of outdoor bioassays at the shore of Lake Taihu. It showed that N only additions induced phytoplankton growth but adding only P did not. Combined N plus P additions promoted higher phytoplankton biomass than N only additions, which suggested that both N and P were deficient for maximum phytoplankton growth in this lake (TN:TP = 18.9). When nutrients are present at less than 7.75-13.95 mg/L TN and 0.41-0.74 mg/L TP, the deficiency of either N or P or both limits the growth of phytoplankton. N limitation then takes place when the TN:TP ratio is less than 21.5-24.7 (TDN:TDP was 34.2-44.3), and P limitation occurs above this. Therefore, according to this ratio, controlling N when N limitation exists and controlling P when P deficiency is present will prevent algal blooms effectively in the short term. But for the long term, a persistent dual nutrient (N and P) management strategy is necessary.     

废水除磷技术的研究与发展

目前 ,人们越来越重视污水除磷技术。本文介绍与评述了化学和生物两种除磷方式及其除磷机理和工艺 ,并着重介绍了生物除磷的现状、发展和研究动向     

模拟煤灰渣垂直潜流人工湿地的除磷性能分析

为确定煤灰渣作为垂直潜流人工湿地基质的可行性,通过静态吸附实验和煤灰渣去除生活污水中的磷素实验,表明煤灰渣对污水中磷素的吸附平衡时间较短,吸附速率较快.当温度降低时,煤灰渣的磷素吸附容量对吸附平衡浓度依赖性和吸附强度随之降低,最大理论吸附容量亦降低 83.10% .在处理0.5 m 3 /(m2·d)的生活污水中,煤灰渣对TP的平均去除率达86.03%,吸附方式包括物理吸附和化学吸附,同时得出煤灰渣最大磷素解析量占最大理论吸附容量的0.73%,在实际人工湿地应用中应注意磷素解析而形成的二次污染.     

A comprehensive classification method for VOC emission sources to tackle air pollution based on VOC species reactivity and emission amounts

In China, volatile organic compound(VOC) control directives have been continuously released and implemented for important sources and regions to tackle air pollution. The corresponding control requirements were based on VOC emission amounts(EA), but never considered the significant differentiation of VOC species in terms of atmospheric chemical reactivity. This will adversely influence the effect of VOC reduction on air quality improvement. Therefore,this study attempted to develop a comprehensive classification method for typical VOC sources in the Beijing–Tianjin–Hebei region(BTH), by combining the VOC emission amounts with the chemical reactivities of VOC species. Firstly, we obtained the VOC chemical profiles by measuring 5 key sources in the BTH region and referencing another 10 key sources, and estimated the ozone formation potential(OFP) per ton VOC emission for these sources by using the maximum incremental reactivity(MIR) index as the characteristic of source reactivity(SR). Then, we applied the data normalization method to respectively convert EA and SR to normalized EA(NEA) and normalized SR(NSR) for various sources in the BTH region.Finally, the control index(CI) was calculated, and these sources were further classified into four grades based on the normalized CI(NCI). The study results showed that in the BTH region,furniture coating, automobile coating, and road vehicles are characterized by high NCI and need to be given more attention; however, the petro-chemical industry, which was designated as an important control source by air quality managers, has a lower NCI.