Investigation on the effect of sintering temperature on kaolin hollow fibre membrane for dye filtration

Despite its extraordinary price, ceramic membrane can still be able to surpass polymeric membrane in the applications that require high temperature and pressure conditions, as well as harsh chemical environment. In order to alleviate the high cost of ceramic material that still becomes one of the major factors that contributes to the high production cost of ceramic membrane, various attempts have been made to use low cost ceramic materials as alternatives to well-known expensive ceramic materials such as alumina, silica, and zirconia in the fabrication of ceramic membrane. Thus, local Malaysian kaolin has been chosen as the ceramic material in this study for the preparation of kaolin hollow fibre membrane since it is inexpensive and naturally abundant in Malaysia. Due to the fact that the sintering process plays a prominent role in obtaining the desired morphology, properties, and performances of prepared ceramic membrane, the aim of this work was to study the effect of different sintering temperatures applied (ranging from 1200 to 1500 °C) in the preparation of kaolin hollow fibre membrane via dry/wet phase inversion-based spinning technique and sintering process. The morphology and properties of membrane were then characterised by SEM, AFM, FTIR, XRD, and three-point bending test, while the performances of membrane were investigated by conducting water permeation and Reactive Black 5 (RB5) dye rejection tests. From the experimental results obtained, the sintering temperature of 1400 °C could be selected as the optimum sintering temperature in preparing the kaolin hollow fibre membrane with the dense sponge-like structure of separation layer that resulted in the good mechanical strength of 70 MPa with the appreciable water permeation of 75 L/h m² bar and RB5 rejection of 68%.     

Determination of radioactive elements and heavy metals in sediments and soil from domestic water sources in northern peninsular Malaysia

Soil serves as a major reservoir for contaminants as it posseses an ability to bind various chemicals together. To safeguard the members of the public from an unwanted exposure, studies were conducted on the sediments and soil from water bodies that form the major sources of domestic water supply in northern peninsular Malaysia for their trace element concentration levels. Neutron Activation Analysis, using Nigeria Research Reactor-1 (NIRR-1) located at the Centre for Energy Research and Training, Zaria, Nigeria was employed as the analytical tool. The elements identified in major quantities include Na, K, and Fe while As, Br, Cr, U, Th, Eu, Cs, Co, La, Sm, Yb, Sc, Zn, Rb, Ba, Lu, Hf, Ta, and Sb were also identified in trace quantities. Gamma spectroscopy was also employed to analyze some soil samples from the same area. The results indicated safe levels in terms of the radium equivalent activity, external hazard index as well as the mean external exposure dose rates from the soil. The overall screening of the domestic water sources with relatively high heavy metals concentration values in sediments and high activity concentration values in soil is strongly recommended as their accumulation overtime as a consequence of leaching into the water may be of health concern to the members of the public.     

Reusability of sewage sludge in clay bricks

Bricks produced from sewage sludge in different compositions were investigated. Results of the tests indicated that the sludge proportion is a key factor in determining the brick quality. Increasing the sludge content results in a decrease in brick shrinkage, bulk density, and compressive strength. Brick weight loss on ignition was mainly due to the contribution of the contained organic matter from the sludge being burnt off during the firing process, as well as inorganic substances found in both clay and sludge. The physical, mechanical, and chemical properties of the bricks that were supplemented with various proportions of dried sludge from 10 to 40wt% and generally complied with the General Specification for Brick as per the Malaysian Standard MS 7.6:1972, which dictates the requirements for clay bricks used in walling in general. A standard leaching test method also showed that the leaching of metals from the bricks is very low.     

Refugees,water balance,and water stress: Lessons learned from Lebanon

Ambio - The Syrian crisis caused a massive influx of displaced people into neighboring countries, with Lebanon hosting the highest per capita number of refugees (3:10). Water remains the most...     

Factors and values of willingness to pay for improved construction waste management--a perspective of Malaysian contractors

Malaysia is facing an increase in the generation of waste and of accompanying problems with the disposal of this waste. In the last two decades, extensive building and infrastructure development projects have led to an increase in the generation of construction waste material. The construction industry has a substantial impact on the environment, and its environmental effects are in direct relation to the quality and quantity of the waste it generates. This paper discusses general characteristics of the construction contractors, the contractors' willingness to pay (WTP) for improved construction waste management, determining factors which affect the amount of their willingness to pay, and suggestions and policy implications in the perspective of construction waste management in Malaysia. The data in this study is based on contractors registered with the construction industry development board (CIDB) of Malaysia. Employing the open ended contingent valuation method, the study assessed the contractors' average maximum WTP for improved construction waste management to be RM69.88 (1US$=3.6 RM) per tonne of waste. The result shows that the average maximum WTP is higher for large contractors than for medium and small contractors. The highest average maximum WTP value is RM88.00 for Group A (large contractors) RM78.25 for Group B (medium-size contractors) and RM55.80 for Group C (small contractors). One of the contributions of this study is to highlight the difference of CIDB registration grade in the WTP for improved construction waste management. It is found that contractors' WTP for improved waste collection and disposal services increases with the increase in contractors' current paid up capital. The identified factors and determinants of the WTP will assist the formulation of appropriate policies in addressing the construction waste problem in Malaysia and indirectly improve the quality of construction in the country.     

Shell disturbances and butyltins burden in commercial bivalves collected from the Bizerta lagoon (northern Tunisia)

Shell disturbances and soft tissues butyltin burden were investigated in commercial bivalves Lithophaga lithophaga, Mytilus galloprovincialis, Solen marginatus and Crassostrea gigas from the Bizerta lagoon. Shell disturbances were found in all bivalves, being scarce in S. marginatus. In the internal valve of L. lithophaga, burrowing annelids and sipunculids living inside galleries were observed, while in the external valve, brown-blackish or white stains were found. In M. galloprovincialis, a yellowish mass located at the shell anterior side was found fixed firmly to the pearly layer by a hard brownish structure covering some annelid elliptic eggs. In the internal shell layer of some specimens collected in April, embryos belonging to tubiculous annelids at various developmental stages were observed. In C. gigas, shell thickening was revealed in some specimens corresponding to white doughy deposits at the internal valve and between shell layers. In S. marginatus, only one specimen showing a cavity at the posterior site was found. Total butyltin concentrations in the studied bivalves varied between 30 and 245?ng/g dry weight with tributyltin (TBT) being the predominant compound. The highest concentration was recorded in L. lithophaga collected from the Bizerta Bay and the lowest concentration in S. marginatus from Maghraoua. This study provided baseline data that could serve for long-term monitoring of TBT pollution in Tunisia, since legislation to reduce the use of TBT-based antifouling paints has not been introduced yet.     

Electrogeneration of active photocatalysts for wastewater remediation: a review

Environmental Chemistry Letters - Water scarcity is becoming a major issue worldwide due to water pollution and population growth, calling for advanced techniques for water reclamation. For...     

Cleaning symbiosis in an obligate goby–shrimp association

Shrimps from the genus Alpheidae had never been considered as a cleaner organism. In the present study, we demonstrate for the first time, Alpheus rapax engaging in cleaning symbiosis with its gobiid fish associate Myersina macrostoma. Within 450 min of observation time, 9 instances totalling 546 s of cleaning behaviour were recorded. Cleaning behaviour was always preceded by physical contact between the shrimps and their goby associates. The shrimps initiated all cleaning incidents, but these were always terminated by the gobies. Cleaning sessions were observed to occur mostly in the tail region (60.8 %) and followed by the head region (26.2 %). In one instance, a shrimp was observed to clean the gills of its goby associate. The gobies appear to exert some control as to where they were being cleaned by repositioning themselves during a cleaning session.     

Microscale investigations of the fate of heavy metals associated to iron-bearing particles in a highly polluted stream

As it flows through a dense steelmaking area, the Fensch River does transport iron-rich particles and colloids, displaying high contents in metallic contaminants (Zn, Cr, Pb, Cu, Ni, and As). Chemical analysis using inductively coupled plasma mass spectrometry (ICP-MS) was carried out on three compartments—waters, suspended materials, and sediments—along the river linear. The variations of metallic trace element concentrations along the river were shown to be partially related to external inputs (industrial and domestic wastewaters and urban surfaces leaching). However, some discrepancies of element partitioning were evidenced. Pb, Cu, and Mn tend to concentrate in suspended particulate and in dissolved fraction, while Cr and As follow the trend of Fe and concentrate within sediments of the most downstream station, just before the junction with Moselle waters. Zn appears strongly associated to iron-rich particles, resulting in a decrease of its concentration in waters for the last station. Along the Fensch linear, the variation of metal partitioning between water and particulate phases is accompanied with strong modifications of the nature and mineralogy of iron-rich particles, as evidenced by microanalyses using electron and X-ray beams. The combination of bulk analyses using ICP-MS and microanalyses applied to the three compartments allowed us to propose a three-step process “settling–weathering–resuspension” to explain Zn partitioning.     

Preparation and characterization of glass hollow fiber membrane for water purification applications

This work discusses the preparation and characterizations of glass hollow fiber membranes prepared using zeolite-5A as a starting material. Zeolite was formed into a hollow fiber configuration using the phase inversion technique. It was later sintered at high temperatures to burn off organic materials and change the zeolite into glass membrane. A preliminary study, that used thermogravimetric analysis (TGA), X-ray diffraction (XRD), and Fourier transform infrared (FTIR), confirmed that zeolite used in this study changed to glass at temperatures above 1000 °C. The glass hollow fiber membranes prepared using the phase inversion technique has three different microstructures, namely (i) sandwich-like structure that originates from inner layer, (ii) sandwich-like that originates from outer layer, and (iii) symmetric sponge like. These variations were influenced by zeolite weight loading and the flow rate of water used to form the lumen. The separation performances of the glass hollow fiber membrane were studied using the pure water permeability and the rejection test of bovine serum albumin (BSA). The glass hollow fiber membrane prepared from using 48 wt% zeolite loading and bore fluid with 9 mL min^?1 flow rate has the highest BSA rejection of 85% with the water permeability of 0.7 L m^?2 h^?1 bar^?1. The results showed that the separation performance of glass hollow fiber membranes was in the ultrafiltration range, enabled the retention of solutes with molecular sizes larger than 67 kDa such as milk proteins, endotoxin pyrogen, virus, and colloidal silica.