Levels of selected heavy metals in commercial fish from five freshwater lakes,Pakistan

The levels of As, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Zn and Hg are estimated by atomic absorption in the muscle of six commercial species of fish belonging to five freshwater lakes of Pakistan. The species included Mastacembelus armatus, Tor putitura, Mystus seenghala, Wallago attu, Catla catla and Labeo rohita. The fish were procured in comparable weight ranges so that a viable comparison of trace metal content could be effected. As, Fe, Pb, Zn and Hg showed elevated levels of 0.006–6.967, 0.933–6.133, 0.060–4.108, 0.978–5.363 and 0.030–3.211 μg/g, wet weight. The relevant statistical parameters, such as standard deviation, standard error, skewness and its t‐value are also reported for establishing the randomness of the distribution in relation to the corresponding data of freshwater lakes of the world and examined in view of species‐specificity and origin.     

Comparative Metal Distribution in Hair of Pakistani and Libyan Population and Source Identification by Multivariate Analysis

Using nitric acid-perchloric acid wet digestion based FAAS method ten selected metals (Cd, Co, Cr, Fe, K, Mn, Na, Ni, Pb and Zn) were determined in the scalp hair of male Pakistani and Libyan donors (n = 62), between 3–54 years age and residing in typical urban areas. The study was taken up to identify sources of metal distribution in two diverse population segments exposed to different environments. Sodium emerged with the highest mean hair concentration of 511.0 μg/g and 496.9 μg/g for Libyan and Pakistani donors respectively, followed by K, at 266.2 μg/g and 242.4 μg/g for the two donor categories. Cadmium showed the lowest mean hair concentration for both Pakistani (0.380 μg/g) and Libyan (0.530 μg/g) donors. Levels of Na, K, Pb, Cr and Cd were higher in hair of Libyan donors compared with Pakistani counterparts which showed higher comparative levels of Zn, Fe, Co, Ni and Mn. Strong metal-to-metal correlations were found between Na–K (r = 0.638) and Cd–Co (r = 0.574) for Pakistani donors, while for Libyan donors, Na–K (r = 0.680) and Fe–Mn (r = 0.624) correlations emerged as strongly significant. Only K was found to have a strong positive correlation (r = 0.611) with age for Pakistani donors while this correlation was significantly negative (r = −0.500) for Libyan donors, probably arising from individual food habits. Other metals showed no viable relationship with age. Principal Component Analysis (PCA) and Cluster Analysis (CA) of the data evidenced food, industrial emissions and automobile emissions as possible sources of metal distribution. The results of the present study are compared with those reported for subjects from other regions of the world.     

Age- and sex-based comparative distribution of selected metals in the scalp hair of an urban population from two cities in Pakistan

Concentrations of Cu, Zn, Pb and Ni in the scalp hair of male and female donors, with an age range of 6-60 years, were determined by ICP atomic emission spectroscopy. The donors were drawn from the densely populated city of Lahore and the relatively less-populated capital city of Islamabad for comparative evaluation of the metal levels in relation to age, sex and location. Linear regression analyses and correlation between paired metals indicated a positive correlation between Cu and Zn for both sexes ( [Formula: see text] ) and between Pb and Ni ( [Formula: see text] ) for males and females of Lahore. Metal concentrations varied between the two cities and the two sexes. The highest mean concentration was found for Zn at 180.5 microg g(-1) for males and 202.4 microg g(-1) for females from Lahore, while for counterparts from Islamabad the values were 105.2 microg g(-1) and 206.6 microg g(-1). Copper showed an identical mean concentration (20.8 microg g(-1)) in the hair of both males and females from Lahore; however, relatively lower mean concentrations (7.7 and 10.8 microg g(-1)) were observed for donors from Islamabad. Mean Pb concentrations in hair of male donors from Lahore and Islamabad were 9.4 and 7.0 microg g(-1), respectively; in female groups the concentrations were 14.3 and 5.7 microg g(-1), respectively. Ni showed the lowest concentration range (4.3-4.5 microg g(-1)) of all the four metals for subjects from Lahore, and this was higher than the corresponding range (2.0-3.2 microg g(-1)) for subjects from Islamabad. The findings are discussed in relation to the available data from the literature.     

Trace metals in fish,sediment and water from the south west coast of the Arabian sea,Pakistan

Concentrations of ten metals (As, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Zn and Hg) in the edible muscle of Arius maculatus captured from eight different near‐shore and off‐shore sites off the south west coast of the Arabian Sea, Pakistan, were determined by atomic absorption spectrophotometry. Relevant water and sediment samples from the sites were also analysed for the metals. Zinc showed the highest metal concentration (6.763 μg/g, wet weight) in the muscle of the fish, while Mn and Hg showed lowest level (0.019 μg/g, wet weight). Of all the metals investigated, largest scatter (measured as σ) was observed for Zn (σ = 2.058 /μg/g) in fish muscle, for Fe and Mn in sediment (σ = 27481 and 44.50 μg/g) and for As in water (σ = 0.270 μg/L). The metal distribution data pertaining to water, fish and sediment were examined on the basis of simple metal correlations. The statistical study revealed that Ni, Cr, Pb and Cu had significant positive correlations (r > 0.830 at ρ = 0.01). The finding substantiated a trace metal concentration gradient in the area, thereby indicating that the local marine environment is contaminated by anthropogenic sources.     

Characterization, Source Identification and Apportionment of Selected Metals in TSP in an Urban Atmosphere

To understand the metal distribution characteristics in the atmosphere of urban Islamabad, total suspended particulate (TSP) samples were collected on daily 12 h basis, at Quaid-i-Azam University campus, using high volume sampler. The TSP samples were treated with HNO₃/HClO₄ based wet digestion method for the quantification of eight selected metals; Fe, Zn, Pb, Mn, Cr, Co, Ni and Cd by FAAS method. The monitoring period ran from June 2001 to January 2002, with a total of 194 samples collected on cellulose filters. Effects of different meteorological conditions such as temperature, relative humidity, wind speed and wind direction on selected metal levels were interpreted by means of multivariate statistical approach. Enhanced metal levels for Fe (930 ng/m³), Zn (542 ng/m³) and Pb (210 ng/m³) were found on the mean scale while Mn, Cr, Co and Ni emerged as minor contributors. Statistical correlation study was also conducted and a strong correlation was observed between Pb-Cr (r=0.611). The relative humidity showed some significant influence on atmospheric metal distribution while other meteorological parameters showed weak relationship with TSP metal levels. Regarding the origin of sources of heavy metals in TSP, the statistical procedure identified three source profiles; automobile emissions, industrial/metallurgical units, and natural soil dust. The metal levels were also compared with those reported for other parts of the world which showed that the metal levels in urban atmosphere of Islamabad are in exceedence than those of European industrial and urban sites while comparable with some Asian sites.     

Co-substrate-mediated utilization of high concentration of phenol by Aspergillus niger FP7 and reduction of its phytotoxicity on Vigna radiata L.

Environmental Science and Pollution Research - Phenol and its derivatives behave as mutagens, teratogens and carcinogens inducing adverse physiological effects and are considered environmental...     

Wastewater and sludge management and research in Oman: An overview

It is well recognized that management of wastewater and sludge is a critical environmental issue in many countries. Wastewater treatment and sludge production take place under different technical, economic, and social contexts, thus requiring different approaches and involving different solutions. In most cases, a regular and environmentally safe wastewater treatment and associated sludge management requires the development of realistic and enforceable regulations, as well as treatment systems appropriate to local circumstances. The main objective of this paper is to provide useful information about the current wastewater and sludge treatment, management, regulations, and research in Oman. Based on the review and discussion, the wastewater treatment and sludge management in Oman has been evolving over the years. Further, the land application of sewage sludge should encourage revision of existing standards, regulations, and policies for the management and beneficial use of sewage sludge in Oman.

Implications: Wastewater treatment and sludge management in Oman have been evolving over the years. Sludge utilization has been a challenge due to its association with human waste. Therefore, composting of sewage sludge is the best option in agriculture activities. Sludge and wastewater utilization can add up positively in the economic aspects of the country in terms of creating jobs and improving annual income rate. The number of research projects done on wastewater reuse and other ongoing ones related to the land application of sewage sludge should encourage revision of existing standards, regulations, and policies for the management and beneficial use of sewage sludge in Oman.     

Mechanical and Thermal Properties of PLLA/PCL Modified Clay Nanocomposites

Poly(l-lactic acid) (PLLA)/poly(caprolactone) (PCL) and two types of organoclay (OMMT) including a fatty amide and ocatdecylamine montmorillonite (FA-MMT and ODA-MMT) were employed to produce polymer nanocomposites by melt blending. Materials were characterized using X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), elemental analysis, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Mechanical properties were also investigated for these nanocomposites. The nanocomposites showed increasing mechanical properties and thermal stability. XRD results indicated that the materials formed nanocomposites. SEM morphology showed that increasing content of OMMT reduced the domain size of phase separated particles. TEM outcomes have confirmed the intercalated type of nanocomposite. Additionally, a solution casting process has been used to prepare these nanocomposites and characterized to compare these results with the above process.     

Spatial variations in selected metal contents and particle size distribution in an urban and rural atmosphere of Islamabad, Pakistan

Spatial variations in total suspended particulate matter (TSP) were investigated for distribution of metals and particle size fractions in the urban and rural atmosphere of Islamabad, Pakistan. The metals Na, K, Fe, Mn, Pb, Cd, Cr, Zn, Ni and Co, and the particle fractions <2.5, 2.5-10, 10-100 and >100 microm were included in the study. TSP samples were trapped on glass fibre filters using high volume samplers and quantification of metals was done using Atomic Absorption Spectrometry employing HNO(3) based wet digestion. At the urban site, Na was dominant at 2.384 microg/m(3) followed by K, Fe and Zn with 0.778, 0.667 and 0.567 microg/m(3) as mean concentrations, respectively. The metal levels for the rural site ranged from 0.002 microg/m(3) for Cd to 1.077 microg/m(3) for Na. However, compared with the urban site, mean Pb concentration showed an almost two-fold enhancement, i.e., 0.163 Vs. 0.327 microg/m(3). Metals and particle size source identification was done using Principal Component Analysis and Cluster Analysis. Five sources were traced out for the urban site: industrial, soil, automobile emissions, metallurgical industries and excavation activities. For the rural site, four sources were recorded: agricultural, automotive emissions, excavation activities and metallurgical units. Collectively, for both the sites, PM(10-100) emerged as a major contributor to TSP, followed by PM(2.5-10), PM(<2.5) and PM(>100) in that order. The metals showed in general positive relationship with fine particulate fractions (PM(2.5-10), PM(<2.5)), and negative correlation with coarse fractions (PM(10-100), PM(>100)). Comparison with the corresponding data from various Asian sites revealed that the levels of Na, K, Fe, Mn, Co and Ni for the present study were lower than those reported for grossly polluted cities of the world.     

Distribution of lead in relation to size of airborne particulate matter in Islamabad, Pakistan

Airborne particulate matter (PM) collected from two sampling stations in Islamabad, Pakistan, was analyzed for lead content and size gradation. A high volume air sampler was used to trap particulates on glass fiber filters for 8-12 h on a daily basis. Lead was estimated using a nitric acid digestion based AAS method on 44 samples from station 1 and 61 samples from station 2. Particle size fractions were categorized as <2.5, 2.5-10, 10-100 and >100 microm. The correlation between lead concentration and particle size was investigated. The results from two stations indicated average airborne lead concentrations of 0.505 and 0.185 microg/m3. Enhanced levels of lead were measured at a maximum of 4.075 microg/m3 at station 1 and 4.000 microg/m3 at station 2. PM < 2.5 and PM > 100 were found to constitute the local atmosphere in comparable proportions. A comparison of the lead levels is made with the existing permissible levels of this element laid down by different international agencies.