Influence of Technological Process on Biodegradation of PVA/Waxy Starch Blends in an Aerobic and Anaerobic Environment

Improving biodegradability of PVA/starch blends is a reality already documented by a number of works. Admittedly, mechanical properties of products (for example, tensile strength) are somewhat worse, but suitable composition optimizing or chemical modifying of starch may eliminate the problem to a large degree. This work is an attempt to find another potential effect influencing biodegradability, that of technological procedure for producing films from these blends on an extruder. The procedure with a so-called pre-extrusion step (two-stage) and dry-blend (single-stage) produced blends of slightest differences in achieved biodegradability (virtually within limits of experimental error) in aerobic (76 vs. 79%) as well as anaerobic breakdown (48 vs. 52%). Conversely, morphological analysis exhibited superior homogeneity of films prepared by the two-stage process; their tensile strength was also higher.     

Use of hematological and plasma biochemical parameters to assess the chronic effects of a fungicide propiconazole on a freshwater teleost

Blood is an indicator of physiological condition of an animal. Therefore, the chronic effects of propiconazole, a triazole fungicide present in aquatic environment, on hematology of rainbow trout were investigated in this study. Fish were exposed at various concentrations of PCZ (0.2, 50 and 500 μg L(-1)) for 7, 20 and 30 d. Multiple biomarkers were measured, including hematological indices (hemoglobin concentration, red blood cells count, hematocrit, leukocyte count, mean erythrocyte hemoglobin, mean erythrocyte volume and mean color concentration) and plasma biochemical parameters (ammonia, glucose, total proteins, creatine kinase, lactate dehydrogenase, alanine aminotransferase and aspartate aminotransferase). Through principal component analysis and integrated biomarker response assessment, influence extent induced by PCZ-stress of each test group was distinguished. Additional, all parameters measured in this study displayed different dependent patterns to PCZ concentrations and exposure time by two-way ANOVA. The results of this study indicate that chronic exposure of PCZ has altered multiple physiological indices in fish hematology and CK activity may be an early biomarker of PCZ toxicity; however, before these parameters are used as special biomarkers for monitoring residual PCZ in aquatic environment, more detailed experiments in laboratory need to be performed in the future.     

Photocatalytic oxidation of volatile organic compounds using fluorescent visible light

Photocatalytic oxidation (PCO) of volatile organic compounds (VOCs) is a highly attractive alternative technology for purification and deodorization of indoor air. The main objectives of this study were to demonstrate that a common fluorescent visible light (FVL) lamp can be used to effectively remove by PCO low concentrations of VOCs from slightly contaminated air and to provide some fundamental and technical details on the process. The target VOC was n-butanol, which is a standard reference odorant. Its PCO was studied under a long residence time in a 3.7-L cylindrical reactor with commercial titanium dioxide (TiO2) as the reference photocatalyst and using mostly FVL for illumination. For comparison only, a UV (black) light lamp was used. The gas-phase products were detected and quantified online by gas chromatography (GC). The effects of reactor residence time, of inlet concentration, and of the relative light intensity on the efficiency of the process were also evaluated. At a high n-butanol concentration (0.1 vol %), butanal and propanal were identified as the intermediate products of the process; ethanal appeared when the initial concentration was < or = 850 ppm(v). This indicates that PCO leading to CO2 and H2O is relatively slow and proceeds in a stepwise manner. Although the efficiency of the process with an FVL lamp was significantly lower than when using a UV black light, complete PCO of low concentrations was achieved for 100 ppm(v). In a search for a material with photoactivation extended to higher wavelengths or increased photoactivity, several samples of transition metal- or silver ion-doped (2 atomic %) TiO2 as well as SrTi(1-x-)Fe(x)O3 (x = 0.1 and 0.15) perovskites were included in the study. None of these materials was more active than pure TiO2. The results of this study open new horizons in the area of in door air quality (IAQ) control.     

Direct electrothermal atomic spectrometric determination of Ag in aqua regia extracts of soils, sediments, and sewage sludge with matrix modification

Silver is subject to significant interferences caused by high chloride concentrations in electrothermal atomic absorption spectrometry, thus its direct determination in aqua regia leaches from soils, sediments, and sludges is very difficult, especially when using instrumentation equipped with deuterium-lamp background correction (D₂). In this study, the interference of the aqua regia medium was successfully eliminated using Pd–citric acid chemical modifier. This chemical modifier was found to be the most advantageous in comparison with Pd mixture with ascorbic acid, tartaric acid, or citric acid–Li based on its ability to suppress the interference originating from different chloride matrix. Palladium increases the analyte stability; citric acid serves as a reducing reagent, and furthermore, it helps to remove the interfering chlorides by forming HCl, in the drying step of the electrothermal program. In the presence of the modifier, the pyrolysis temperature can be adjusted up to 1,000 °C with no loss of the analyte. The obtained limit of detection and characteristic mass were 5 ng g^?1 and 1.7 pg, respectively. The accuracy of the method was verified by means of six different reference samples and by comparing the results of the analysis of real samples with those obtained by inductively coupled plasma orthogonal acceleration time-of-flight mass spectrometer. The proposed method was applied to the Ag determination in soils, sediments, and sewage sludge samples from the Pardubice region in Czech Republic.     

Uptake of Cd,Pb, U,and Zn by plants in floodplain pollution hotspots contributes to secondary contamination

Environmental Science and Pollution Research - Willows, woody plants of genus Salix common in floodplains of temperate regions, act as plant pumps and translocate the Cd and Zn in the soil profiles...     

Photocatalytic Oxidation of Volatile Organic Compounds Using Fluorescent Visible Light

Abstract

Photocatalytic oxidation (PCO) of volatile organic compounds (VOCs) is a highly attractive alternative technology for purification and deodorization of indoor air. The main objectives of this study were to demonstrate that a common fluorescent visible light (FVL) lamp can be used to effectively remove by PCO low concentrations of VOCs from slightly contaminated air and to provide some fundamental and technical details on the process. The target VOC was n-butanol, which is a standard reference odorant. Its PCO was studied under a long residence time in a 3.7-L cylindrical reactor with commercial titanium dioxide (TiO₂) as the reference photocatalyst and using mostly FVL for illumination. For comparison only, a UV (black) light lamp was used. The gas-phase products were detected and quantified online by gas chromatography (GC). The effects of reactor residence time, of inlet concentration, and of the relative light intensity on the efficiency of the process were also evaluated. At a high n-butanol concentration (0.1 vol %), butanal and propanal were identified as the intermediate products of the process; ethanal appeared when the initial concentration was <850 ppm_v. This indicates that PCO leading to CO₂ and H₂O is relatively slow and proceeds in a stepwise manner. Although the efficiency of the process with an FVL lamp was significantly lower than when using a UV black light, complete PCO of low concentrations was achieved for 100 ppm_v. In a search for a material with photoactivation extended to higher wavelengths or increased photo-activity, several samples of transition metal- or silver ion-doped (2 atomic %) TiO₂ as well as SrTi_1xFe_xO₃ (x = 0.1 and 0.15) perovskites were included in the study. None of these materials was more active than pure TiO₂. The results of this study open new horizons in the area of indoor air quality (IAQ) control.     

Novel approach to monitoring of the soil biological quality

In this study, a new approach to interpretation of results of the simple microbial biomass and respiration measurements in the soil microbiology is proposed. The principle is based on eight basal and derived microbial parameters, which are standardized and then plotted into sunray plots. The output is visual presentation of one plot for each soil, which makes possible the relative comparison and evaluation of soils in the monitored set. Problems of soil microbiology, such as the lack of benchmarking and reference values, can be avoided by using the proposed method. We found that eight parameters provide enough information for evaluation of the status of the soil microorganisms and, thus, for evaluation of the soil biological quality. The usage of rare parameters (potential respiration PR, ratio of potential and basal respiration PR/BR, biomass-specific potential respiration PR/C(bio), available organic carbon C(ext), and biomass-specific available organic carbon C(ext)/C(bio)) can be recommended, besides classical and well-known parameters (microbial biomass C(bio), basal respiration BR, metabolic coefficient qCO(2)). The combination of basal parameters and derived coefficients can also extend our knowledge about the condition of the soil microorganisms. In monitoring the case studies presented, we observed that soils evaluated to possess good biological quality displayed generally higher values of organic carbon, total nitrogen, clay, and cation exchange capacity. The soils of good biological quality can display higher levels of contaminants. This is probably related with the higher content of organic carbon and clay in these soils.     

Promiscuous behaviour disrupts pregnancy block in domestic horse mares

Based on questionnaires from horse breeders, we found that bringing a pregnant mare which had been mated away from home into a vicinity of a familiar male who was not the father of her foetus increased probability of pregnancy disruption. These mares aborted in 31% of cases, while none of those mated within the home stable aborted. Repeated sexual activity either by a stallion or dominant gelding from the normal home group was observed shortly after the mare came from away-mating. Pregnant mares isolated from home males by a fence were even seen soliciting them over the fence. We speculate that, once returned to the home “herd”, and introduced to familiar males, mares were more likely to terminate their pregnancy to save energy and avoid likely future infanticidal loss of their progeny by dominant male(s) of the home social group. This is a newly discovered phenomenon where a mare manipulates the male’s paternity assessment by promiscuous mating. It may explain a common increased incidence of foetal loss in domestic horses occurring in nearly 40% of pregnancies. We conclude that the common practice of transporting the mare for mating and then bringing her back to an environment with males, stallions or geldings, which did not sire the foetus, is the main cause of high percentages of pregnancy disruption in domestic horses.     

Positive long-term effect of mulching on species and functional trait diversity in a nutrient-poor mountain meadow in Central Europe

Oligotrophic mountain meadows are threatened biodiversity hotspots throughout Europe. The traditional summer hay-making followed by autumn grazing is no longer economic and question is whether alternative managements can maintain both plant species and functional diversity typical of these habitats. In the Bohemian Forest Mts., we applied three treatments (mowing once a year - i.e., cutting and removing the biomass, mulching once a year - cutting and leaving the crushed biomass to decompose in situ, fallowing - no cutting) in order to assess temporal changes in meadow vegetation, plant trait composition and biomass production in a 13-year experiment. We recorded for each species twenty-five traits as to be most informative of plant strategies related to growth, resource acquisition and carbon-water economy. We compared different components of trait composition (community averages that mostly reflect traits of dominant species vs. the Rao index of functional diversity that reflects trait dissimilarity among species) and their impact on biomass production. We show that mulching promotes species and functional diversity by facilitating heliophilous forbs and legumes with more acquisitive strategies in resource use and release, e.g., higher foliar N and P content. This occurs at the expense of tall grasses (with resource-retentive strategies, e.g., high leaf dry matter content) which dominate the mown and fallow plots. The divergence in most quantitative traits indicates that niche complementarity is the dominant assembly process in mulched plots, which can prevent competitive exclusion and enable species coexistence. The divergent development was detected only after 5-6 years. This slow floristic and functional response is caused by acidity of soil and severe mountain climate that preclude rapid responses of vegetation to land-use changes. We conclude that mulching represents a good compromise maintaining both plant species and functional diversity as well as a relatively high biomass production. Mowing without grazing leads to gradual nutrient loss and thus reduces the productivity and diversity in these oligotrophic ecosystems. Fallowing causes gradual loss in diversity by increased grass competition and litter accumulation.     

The variations of aluminium species in mountainous forest soils and its implications to soil acidification

Aluminium (Al) speciation is a characteristic that can be used as a tool for describing the soil acidification process. The question that was answered is how tree species (beech vs spruce) and type of soil horizon affect Al speciation. Our hypotesis is that spruce and beech forest vegetation are able to modify the chemical characteristics of organic horizon, hence the content of Al species. Moreover, these characteristics are seasonally dependent. To answer these questions, a detailed chromatographic speciation of Al in forest soils under contrasting tree species was performed. The Jizera Mountains area (Czech Republic) was chosen as a representative mountainous soil ecosystem. A basic forestry survey was performed on the investigated area. Soil and precipitation samples (throughfall, stemflow) were collected under both beech and spruce stands at monthly intervals from April to November during the years 2008–2011. Total aluminium content and Al speciation, pH, and dissolved organic carbon were determined in aqueous soil extracts and in precipitation samples. We found that the most important factors affecting the chemistry of soils, hence content of the Al species, are soil horizons and vegetation cover. pH strongly affects the amount of Al species under both forests. Fermentation (F) and humified (H) organic horizons contain a higher content of water extractable Al and Al³⁺ compared to organo-mineral (A) and mineral horizons (B). With increasing soil profile depth, the amount of water extractable Al, Al³⁺ and moisture decreases. The prevailing water-extractable species of Al in all studied soils and profiles under both spruce and beech forests were organically bound monovalent Al species. Distinct seasonal variations in organic and mineral soil horizons were found under both spruce and beech forests. Maximum concentrations of water-extractable Al and Al³⁺ were determined in the summer, and the lowest in spring.