Evolution of a Mediterranean Coastal Zone: Human Impacts on the Marine Environment of Cape Creus

This study presents an integrated analysis of the evolution of the marine environment and the human uses in Cape Creus, a Mediterranean coastal area where intense commercial fisheries and recreational uses have coexisted over the last fifty years. The investigation synthesizes the documented impacts of human activities on the marine environment of Cap de Creus and integrates them with new data. In particular, the evolution of vulnerable, exploited species is used to evaluate the fishing impacts. The effects of area protection through the establishment of a marine reserve in the late 1990s and the potential climate change impacts are also considered. The evolution of the human uses is marked by the increasing socioeconomic importance of recreational activities (which affect species and habitats) in detriment to artisanal and red coral fisheries (which principally affect at a species level). Overall, populations of sedentary, vulnerable exploited species, hard sessile benthic invertebrates, and ecologically fragile habitats, such as seagrass meadows, the coralligenous and infralittoral algal assemblages have been the most negatively impacted by anthropogenic activities. Albeit human uses currently constitute the largest negative impact on the marine environment of Cap de Creus, climate change is emerging as a key factor that could have considerable implications for the marine environment and tourism activities. The establishment of the marine reserve appears to have had little socioeconomic impact, but there is some evidence that it had some positive biological effects on sedentary, littoral fishes. Results demonstrate that the declaration of a marine reserve alone does not guarantee the sustainability of marine resources and habitats but should be accompanied with an integrated coastal management plan.     

Sand as a relevant fraction in geochemical studies in intertidal environments

Soil and sediment samples from several intertidal environment exposed to different types of contamination were studied to investigate the importance of grain size in relation to the capacity of the substrates to retain trace metals. The unfractionated samples (referred to as bulk samples) were separated into the following grain/size fractions: fine–coarse sand (2?0.100 mm), very fine sand (0.100?0.050 mm), silt (0.050?0.002 mm), and clay (0.002 mm). The sample into its fractions was carried out was in a glove box under high-purity N₂ atmosphere in order to minimize any alterations to the samples. The bulk samples were characterized in terms of physicochemical properties such as pH, redox potential, and grain size. The total organic carbon (TOC), total sulfur (S), iron (Fe) pyrite, Fe, and manganese (Mn), and trace metals lead (Pb), mercury (Hg), chromium (Cr), and nickel (Ni) were analyzed in the bulk samples and in each fraction. The sand fractions were also examined by scanning electron microscopy (SEM). Comparisons of the above parameters were made between fractions and between each fraction and the corresponding bulk sample. The fine–coarse sand fraction contained high levels of the primary elements of the geochemical processes that occur in marine sedimentary environments such as TOC, total Fe, Mn, and S. The net concentrations of these four elements were higher in the fine-coarse sand fraction than in the very fine sand fraction and were similar to the net concentrations in the silt and clay fractions. Detailed SEM analysis of the sand coarse fraction revealed the presence of Fe and aluminum oxyhydroxide coatings in the oxic layers, whereas the framboidal pyrites and coatings observed in the anoxic layers were Fe sulfides. The presence of the various coatings explains why the trace metal concentrations in the sand fine–coarse fraction were similar to those in the clay fraction and higher than those in the very fine sand fraction. The present results highlight the importance of the sand fraction, which is generally disregarded in geochemical and environmental studies of sedimentary layers.     

Depth-dependence and monthly variability of charophyte biomass production: consequences for the precipitation of calcium carbonate in a shallow <Emphasis Type="Italic">Chara</Emphasis>-lake

The month-to-month variability of biomass and CaCO₃ precipitation by dense charophyte beds was studied in a shallow Chara-lake at two depths, 1 and 3 m. Charophyte dry weights (d.w.), the percentage contribution of calcium carbonate to the dry weight and the precipitation of CaCO₃ per 1 m² were analysed from May to October 2011. Physical-chemical parameters of water were also measured for the same sample locations. The mean dry weight and calcium carbonate precipitation were significantly higher at 1 m than at 3 m. The highest measured charophyte dry weight (exceeding 2000 g m^?2) was noted at 1 m depth in September, and the highest CaCO₃ content in the d.w. (exceeding 80 % of d.w.) was observed at 3 m depth in August. The highest CaCO₃ precipitation per 1 m² exceeded 1695 g at 1 m depth in August. Significant differences in photosynthetically active radiation (PAR) were found between 1 and 3 m depths; there were no significant differences between depths for other water properties. At both sampling depths, there were distinct correlations between the d.w., CaCO₃ content and precipitation and water properties. In addition to PAR, the water temperature and magnesium and calcium ion concentrations were among the most significant determinants of CaCO₃ content and d.w. The results show that light availability seems to be the major factor in determining charophyte biomass in a typical, undisturbed Chara-lake. The study results are discussed in light of the role of charophyte vegetation in whole ecosystem functioning, with a particular focus on sedimentary processes and the biogeochemical cycle within the littoral zone.     

Effects of golpar (<Emphasis Type="Italic">Heracleum persicum</Emphasis> Desf.) and probiotics in drinking water on performance,carcass characteristics,organ weights,blood plasma constituents,and immunity of broilers

Increasing levels of Heracleum persicum (golpar) in drinking water were studied in broilers. Two hundred and forty-one-day-old male chickens were allocated to one of six treatments: control, without added phytogenics nor probiotics in drinking water, and probiotics at recommended manufacturer’s level (P) or 1.0, 1.5, 2.0, and 2.5 ml/l of golpar extract solution (G1, G1.5, G2, and G2.5 treatments, respectively) in drinking water. As a result of this study, no linear or quadratic trends in the feed intake (FI) and feed conversion rate (FCR) due to golpar supplementation were found. Body weight gain, final body weight, and relative carcass weight showed a positive linear response with increasing levels of golpar supplementation. Neither golpar nor probiotics had effects on the percentages of edible parts of the carcass. Golpar supplementation levels caused a linear negative response of the albumin content in blood plasma, whereas both abdominal fat as percentage of carcass weight and uric acid levels in blood plasma linearly increased. The effects on Ig responses were only observed at 42 days of age and were similar in probiotics and the highest level of golpar supplementation. Based on our results, both probiotics and golpar supplementation could improve broiler performance and immune function.     

Process design optimization and risk analysis

Hazard identification and risk assessment are key aspects in process plant design. They are often applied in the final stages of the process at whatever the cost, unless financial constraints are imposed. However, a much better solution would be to introduce risk analysis earlier by including it in earlier stages of the design process, such as when the cost of a plant and the cost of any accidents that may occur are estimated. In this paper, an optimization methodology is proposed, in which both cost and risk (with a deterministic approach) are taken into account, to improve on the current situation. If a decision variable is chosen, an objective function will be established that makes it possible to analyze variations in overall costs, including the cost of the investment and the cost of accidents. This leads to an optimum situation in which costs are kept to a minimum. Of course, this optimization is subject to constraints, the greatest of which is the fact that risk must not exceed tolerated threshold levels. The procedure is explained and two examples, one involving a toxic release and the other a BLEVE/fireball, are used to illustrate it.     

Interpretation of analytical data on n-alkanes and polynuclear aromatic hydrocarbons in Arbacia lixula from the coasts of Tenerife (Canary Islands, Spain) by multivariate data analysis

The hydrocarbons contents (n-alkanes, polycyclic aromatic hydrocarbons) were determined in the sea urchin Arbacia lixula. Multivariate data analysis as principal component analysis, factor analysis and, cluster analysis were applied to elucidate sources of pollution. PCA and FA were performed to establish the relationships between variables (hydrocarbons), samples (sea urchin) and sources of pollution.     

Interpretation of heavy metal data from mussel by use of multivariate classification techniques

Different strategies of multivariate analysis of metals concentrations (Mn, Fe, Ni, V, Co, Cu, Cd, Hg, Pb, Na, K) in mussel samples from different spanish markets are used to interpret a data base and identify differences between species and origin of the samples. Principal Component Analysis and Potential curves are applied to properly classify unknown samples from representative mussels samples (Mytilus edulis and Perna canaliculus). Also, Principal Components Analysis is used as display method to visualize the relation between the variables and objects of interest.