‘Emulsion locks’ for the containment of hydrocarbons during surfactant flushing

Reversible double water in oil in water (W/O/W) emulsions were developed to contain subsurface hydrocarbon spills during their remediation using surfactant flushing. Double emulsions were prepared by emulsifying CaCl₂ solutions in canola oil, and subsequently by emulsifying the W/O emulsions in aqueous sodium alginate solutions. The formation of double emulsions was confirmed with confocal and optical microscopy. The double emulsions reversed and gelled when mixed with the surfactants sodium dodecyl sulfate (SDS) and cocamidopropyl betaine (CPB). Gels can act as ‘emulsion locks’ to prevent spreading of the hydrocarbon plume from the areas treated with surfactant flushing, as shown in sand column tests. Shear rheology was used to quantify the viscoelastic moduli increase (gelation) upon mixing the double emulsion with SDS and CPB. SDS was more effective than CPB in gelling the double emulsions. CPB and SDS could adsorb at the interface between water and model hydrocarbons (toluene and motor oil), lowering the interfacial tension and rigidifying the interface (as shown with a Langmuir trough). Bottle tests and optical microscopy showed that SDS and CPB produced W/O and O/W emulsions, with either toluene or motor oil and water. The emulsification of motor oil and toluene in water with SDS and CPB facilitated their flow through sand columns and their recovery. Toluene recovery from sand columns was quantitated using Gas-Chromatography Mass-Spectroscopy (GC-MS). The data show that SDS and CPB can be used both for surfactant flushing and to trigger the gelation of ‘emulsion locks’. Ethanol also gelled the emulsions at 100 mL/L.     

Assessing the influence of altitude and temperature on biological monitoring of freshwater quality: A preliminary investigation

The effect of altitude and water temperature on biomonitoring of freshwater quality was examined along an unpolluted area (36 km in length) of the upper Río Tajo (central Spain). The macrobenthic and fish communities were studied, and the Biological Monitoring Water Quality (BMWQ) method was applied. As expected, values of altitude and temperature respectively decreased and increased with increasing distance from the river source; these two physical parameters exhibited a negative and significant (P<0.05) correlation coefficient between them. However, despite evident changes in the functional structure of both aquatic communities along the study area, BMWQ scores were similar at all sampling sites. Pearson correlation coefficients between physical and biological parameters were not significant (P>0.05). The BMWQ index only exhibited significant (positive) correlation coefficients with macrobenthic and fish biomasses, indicating that freshwater quality could affect the biological production of fluvial ecosystems. It is concluded that biomonitoring of freshwater quality may be independent of the influence of altitude and water temperature at local spatial scales. Nonetheless, further investigations would be needed to clearly differentiate between the effects of anthropogenic and natural causes on biological monitoring at larger spatial scales.     

A review of vulnerability indicators for deltaic social–ecological systems

The sustainability of deltas worldwide is under threat due to the consequences of global environmental change (including climate change) and human interventions in deltaic landscapes. Understanding these systems is becoming increasingly important to assess threats to and opportunities for long-term sustainable development. Here, we propose a simplified, yet inclusive social–ecological system (SES)-centered risk and vulnerability framework and a list of indicators proven to be useful in past delta assessments. In total, 236 indicators were identified through a structured review of peer-reviewed literature performed for three globally relevant deltas—the Mekong, the Ganges–Brahmaputra–Meghna and the Amazon. These are meant to serve as a preliminary “library” of potential indicators to be used for future vulnerability assessments. Based on the reviewed studies, we identified disparities in the availability of indicators to populate some of the vulnerability domains of the proposed framework, as comprehensive social–ecological assessments were seldom implemented in the past. Even in assessments explicitly aiming to capture both the social and the ecological system, there were many more indicators for social susceptibility and coping/adaptive capacities as compared to those relevant for characterizing ecosystem susceptibility or robustness. Moreover, there is a lack of multi-hazard approaches accounting for the specific vulnerability profile of sub-delta areas. We advocate for more comprehensive, truly social–ecological assessments which respond to multi-hazard settings and recognize within-delta differences in vulnerability and risk. Such assessments could make use of the proposed framework and list of indicators as a starting point and amend it with new indicators that would allow capturing the complexity as well as the multi-hazard exposure in a typical delta SES.     

Prevalence of chromosomal aberrations in Argentinean agricultural workers

Environmental Science and Pollution Research - Little is known about biosecurity measures and toxic effects during pesticide application in the province of Jujuy, Argentina, particularly concerning...     

Are anthropogenic factors affecting nesting habitat of sea turtles? The case of Kanzul beach,Riviera Maya-Tulum (Mexico)

Marine coast modification and human pressure affects many species, including sea turtles. In order to study nine anthropogenic impacts that might affect nesting selection of females, incubation and hatching survival of loggerhead (Caretta caretta) and green turtle (Chelonia mydas), building structures were identified along a 5.2 km beach in Kanzul (Mexico). A high number of hotels and houses (88; 818 rooms), with an average density of 16.6 buildings per kilometer were found. These buildings form a barrier which prevents reaching the beach from inland, resulting in habitat fragmentation. Main pressures were detected during nesting selection (14.19% of turtle nesting attempts interrupted), and low impact were found during incubation (0.77%) and hatching (4.7%). There were three impacts defined as high: beach furniture that blocks out the movement of hatchlings or females, direct pressure by tourists, and artificial beachfront lighting that can potentially mislead hatchlings or females. High impacted areas showed lowest values in nesting selection and hatching success. Based on our results, we suggest management strategies to need to be implemented to reduce human pressure and to avoid nesting habitat loss of loggerhead and green turtle in Kanzul, Mexico.     

Characterisation of microbial activity in the framework of natural attenuation without groundwater monitoring wells?: a new Direct-Push probe

At many contaminated field sites in Europe, monitored natural attenuation is a feasible site remediation option. Natural attenuation includes several processes but only the microbial degradation leads to real contaminant removal and very few methods are accepted by the authorities providing real evidence of microbial contaminant degradation activity. One of those methods is the recently developed in situ microcosm approach (BACTRAP®). These in situ microcosms consist of perforated stainless steel cages or PTFE tubes filled with an activated carbon matrix that is amended with ¹³C-labelled contaminants; the microcosms are then exposed within groundwater monitoring wells. Based on this approach, natural attenuation was accepted by authorities as a site remediation option for the BTEX-polluted site Zeitz in Germany. Currently, the in situ microcosms are restricted to the use inside groundwater monitoring wells at the level of the aquifer. The (classical) system therefore is only applicable on field sites with a network of monitoring wells, and only microbial activity inside the monitoring wells at the level of the aquifer can be assessed. In order to overcome these limitations, a new Direct-Push BACTRAP probe was developed on the basis of the Geoprobe® equipment. With respect to the mechanical boundary conditions of the DP technique, these new probes were constructed in a rugged and segmented manner and are adaptable to various sampling concepts. With this new probe, the approach can be extended to field sites without existing monitoring wells, and microbial activity was demonstrated to be measureable even under very dry conditions inside the vadose zone above the aquifer. In a field test, classical and Direct-Push BACTRAPs were applied in the BTEX-contaminated aquifer at the ModelPROBE reference site Zeitz (Germany). Both types of BACTRAPs were incubated in the centre and at the fringe of the BTEX plume. Analysis of phospholipid fatty acid (PLFA) patterns showed that the bacterial communities on DP-BACTRAPs were more similar to the soil than those found on classical BACTRAPs. During microbial degradation of the ¹³C-labelled substrate on the carrier material of the microcosms, the label was only slightly incorporated into bacterial biomass, as determined by PLFA analysis. This provides clear indication for decreased in situ natural attenuation potential in comparison to earlier sampling campaigns, which is presumably caused by a large-scale source remediation measure in the meantime. In conclusion, Direct-Push-based BACTRAPs offer a promising way to monitor natural attenuation or remediation success at field sites which are currently inaccessible by the technique due to the lack of monitoring wells or due to a main contamination present within the vadose zone.     

Biomass yield and carbon abatement potential of banana crops (Musa spp.) in Ecuador

Environmental Science and Pollution Research - Banana is one of the most important agricultural products of Ecuador. It relies on intensive monoculture cropping systems with a large volume of...     

Bone histology of the titanosaur <Emphasis Type="Italic">Lirainosaurus astibiae</Emphasis> (Dinosauria: Sauropoda) from the Latest Cretaceous of Spain

The titanosaur Lirainosaurus astibiae is the only sauropod species known from the Late Cretaceous of the Iberian Peninsula. Lirainosaurus did not reach a gigantic body size and is one of the smallest sauropods discovered to date. Histological analysis of Lirainosaurus bones, focused on diaphyseal transverse sections of appendicular elements, reveals that Lirainosaurus did not exhibit the osseous microstructure typical for large sauropods, but is comparable with that of the coeval titanosaurs Alamosaurus sanjuanensis, Ampelosaurus atacis, and Magyarosaurus dacus, and also shares histological traits with other small to medium-sized sauropodomorph dinosaurs. Lirainosaurus limb bones exhibit a laminar fibrolamellar bone microstructure interrupted by growth marks, fully obliterated in adulthood by intense secondary remodeling processes which tend to replace completely the primary cortex. Lirainosaurus attained smaller sizes than typical sauropods reducing the rate of primary periosteal osteogenesis and developing an extensive secondary remodeling well before the adult size was reached. Histological organization of Lirainosaurus long bones is more mature than observed in basal neosauropods at similar ontogenetic stage, documenting a case of peramorphosis by pre-displacement. This heterochronic growth would be a reversal of the accelerated pattern of bone deposition typical for the sauropod lineage.