Radon, helium and CO2 measurements in soils overlying a former exploited oilfield, Pechelbronn district, Bas-Rhin, France

The Pechelbronn oilfield (Rhine Graben, France), where mining activity ended in the 1960s, has been used for waste disposal for twenty years. Since the wastes are varied, work is underway to identify the discharged materials and their derivatives, as well as to locate and quantify potential discharge sites. Two major goals were assigned to the present work. The first was to identify or refine the location of hidden structures that could facilitate gas emanation up to the surface, by studying soil gas concentrations (mainly ²²²Rn, CO₂, CH₄ and helium) and carbon isotope ratios in the CO₂ phase. The second was devoted to examining, from a health and safety viewpoint, if the use of the oilfield as a waste disposal site might have led to enhanced or modified gas emanation throughout the area.It appeared that CO₂ and ²²²Rn evolution in the whole area were similar, except near some of the faults and fractures that are known through surface mapping and underground observations. These ²²²Rn and CO₂ anomalies made it possible to highlight more emissive zones that are either related to main faults or to secondary fractures acting as migration pathways. In that sense, the CO₂ phase can be used to evaluate ²²²Rn activities distant from tectonic structures but can lead to erroneous evaluations near to gas migration pathways. Dumping of wastes, as well as oil residues, did not appear to have a strong influence on soil gaseous species and emanation. Similarly, enhanced gas migration due to underground galleries and exploitation wells has not been established. Carbon isotope ratios suggested a balance of biological phenomena, despite the high CO₂ contents reached. Other monitored gaseous species (N₂, Ar, H₂ and alkanes), when detected, always showed amounts close to those found subsurface and/or in atmospheric gases.     

Levels of PCDDs, PCDFs and dioxin-like PCBs in raw cow's milk collected in France in 2006

Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) as well as polychlorinated biphenyls (PCBs) are widespread environmental contaminants. A French national survey was carried out in April 2006 to assess the concentrations of PCDD/Fs and dioxin-like PCBs (DL-PCBs) in raw cow's milk. A random sampling scheme stratified by region was applied to collect 239 raw milk samples from 93 plants belonging to 17 dairy companies. Compared to a previous survey led in 1998 analyzing half-skimmed drinking milk in France, the PCDD/Fs level was cut by half, with an average concentration of 0.33 pg toxic equivalent (TEQ)/g fat in 2006. The mean DL-PCBs concentration was 0.57 pg TEQ/g fat and subsequently the sum of PCDD/Fs and DL-PCBs was 0.90 pg/g fat, values below the thresholds defined by the European Union regulations.     

Size distributions of fine and ultrafine particles in the city of Strasbourg: correlation between number of particles and concentrations of NO(x) and SO(2) gases and some soluble ions concentration determination

An Electrical Low Pressure Impactor (ELPI) was used during spring and autumn 2003 in the centre of Strasbourg for the measurement of atmospheric aerosols size distribution. The concentration of NO(x) and SO(2) in air was simultaneously measured with specific analysers. Samples were collected in the range 0.007-10 microm in equivalent aerodynamic diameter size. Number distributions are representative of a pollution originating from urban traffic with a particle size distribution exhibiting a nucleation mode below 29 nm and an accumulation mode around 80 nm in size. A mean particle density equal to 39000+/-35000 total particles per cm(3) with a size ranging from 7 to 10 microm was obtained after a sampling period of 2 weeks in spring. About 86.9% of the number of particles have an aerodynamic diameter below 0.1 microm and 13.1% between 0.1 and 1 microm. Correlation coefficients between the number of particles impacted on each ELPI plate and gas concentrations (SO(2) and NO(x)) showed that the numbers of particles with diameter between 0.10 and 0.62 microm are highly related to the NO(x) concentration. This result indicates that particles are traffic induced since NO(x) is mainly emitted by cars as shown by measurements on various sites. Particles are less clearly correlated to the SO(2) concentration. Particle analysis on different ELPI plates for a sampling period of 2 weeks in autumn showed high level of soluble NO(3)(-), SO(4)(2-) and NH(4)(+) ions. Indeed, up to 90% b.w. of these three species were found in the particle range 0.1-1 microm. The formation of particulate NH(4)NO(3) is favoured by high NO(x) concentration, which induces the formation of gaseous HNO(3).     

Waiting for the flood: technocratic time and impending disaster in the Himalayas

A landslide occurred in the region of Zanskar in the Indian Himalayas in 2015, damming the Tsarap River, creating a lake that effectively became a ticking time bomb, threatening villagers downstream. During the period between the discovery of the natural dam and the bursting of the lake, the state's approach to disaster management plunged the local population into a situation where ‘technocratic time’ ruled, as government experts handled the impending disaster at a rhythm dictated by the production of studies and reports. Analysis of the temporality of disaster mitigation and preparedness measures during this anticipated flood, as well as of the factors that surrounded the events, reveals how attitudes towards the state shaped people's perceptions of these interventions. In Zanskar, the technocratic pace and the state's lack of transparency were seen as a form of oppression that further marginalised the region, in particular by subjecting its population to the process of waiting.     

Two sampling strategies for an overview of pesticide contamination in an agriculture-extensive headwater stream

Two headwaters located in southwest France were monitored for 3 and 2 years (Auvézère and Aixette watershed, respectively) with two sampling strategies: grab and passive sampling with polar organic chemical integrative sampler (POCIS). These watersheds are rural and characterized by agricultural areas with similar breeding practices, except that the Auvézère watershed contains apple production for agricultural diversification and the downstream portion of the Aixette watershed is in a peri-urban area. The agricultural activities of both are extensive, i.e., with limited supply of fertilizer and pesticides. The sampling strategies used here give specific information: grab samples for higher pesticide content and POCIS for contamination background noise and number of compounds found. Agricultural catchments in small headwater streams are characterized by a background noise of pesticide contamination in the range of 20–70 ng/L, but there may also be transient and high-peak pesticide contamination (2000–3000 ng/L) caused by rain events, poor use of pesticides, and/or the small size of the water body. This study demonstrates that between two specific runoff events, contamination was low; hence the importance of passive sampler use. While the peak pesticide concentrations seen here are a toxicity risk for aquatic life, the pesticide background noise of single compounds do not pose obvious acute nor chronic risks; however, this study did not consider the risk from synergistic “cocktail” effects. Proper tools and sampling strategies may link watershed activities (agricultural, non-agricultural) to pesticides detected in the water, and data from both grab and passive samples can contribute to discussions on environmental effects in headwaters, an area of great importance for biodiversity.     

Microorganisms for remediation of cadmium-contaminated soils

An alternative to the cleaning-up of agricultural soil contaminated by heavy metals is to avoid their transfer from soil to plant by inoculating soil with selected microorganisms able to biosorb heavy metals. Here, four bacteria species and a fungus isolated from contaminated soils revealed their ability to grow in the presence of high cadmium level. We tested their growth capacity related to pH and Cd concentration on synthetic and soil extract media. The comparison of their growth rate, the biosorbed cadmium rate and the specific biosorption allowed to select the most efficient microorganism to be used in bioremediation.     

Sorption of Isoproturon and Dimetomorph on lignocellulose from wheat

The adsorption of toxic chemicals on solid substates is a potential means to clean polluted waters. Here, the adsorption of two pesticides, isoproturon and dimetomorph, on lignocellulose extracted from wheat straw is investigated at 20 °C using batch adsorption experiments. Here, we show that the sorption of both pesticides is independent of pH. The sorption capacity of lignocellulose is evaluated. We show that the presence of metallic cations has no influence on the retention capacity of lignocellulose towards pesticides.     

Contribution of Pendant Ester Group Hydrolysis to the Erosion of Acrylic Polymers in Binders Aimed at Organotin-Free Antifouling Paints

Specific polymeric material applications as bioactive molecules delivery systems involve a strictly controlled degradation of polymer matrixes. One possibility to obtain a zero-order kinetic for small molecules release consists in a simple hydrolysis of ester groups contained in the macromolecular structure. The chemical degradation can lead to the continuous surface erosion of the formulated resins without loss of their mechanical properties and to a permanent activity of the delivery systems. Hydrolysis is a very well-known reaction in the case of organic molecules containing ester groups. The mechanism seems to be more complicated when ester groups are located in macromolecular structures. With the aim of antifouling applications, acrylic acid polymers bearing lateral ester groups of different chemical structures (hydrophilic, hydrophobic, hydrolyzable) have been prepared, characterized, and immersed in water, at pH 8, and their hydrolysis has been studied. Experimental data display two parameters, at least, which must be taken into account: the reactivity of the ester groups toward hydrolysis and the hydrophilic/hydrophobic balance of the polymer. The susceptibility of the acrylic polymers to hydrolysis has been compared to the erosion characteristics of the corresponding films. The results confirm that hydrolysis is necessary to obtain a regular degradation of the films without loss of mechanical properties. A relationship has been observed between the characteristics of hydrolysis and erosion for each studied polymer.     

Bioaugmentation with a Bacillus sp. to reduce the phytoavailable Cd of an agricultural soil: comparison of free and immobilized microbial inocula

In order to reduce the cadmium potentially available for plants, soil bioaugmentation was performed by using a Bacillus sp. In a pot experimentation, sterilized and non-sterilized soils were inoculated using free or immobilized cells entrapped in alginate beads. This test was carried out with different inoculum sizes (2 x 10(10) and 2 x 10(11)CFU kg(-1) dw of soil) and alginate bead compositions (10 and 15 g of both alginate and CaCl(2) l(-1)). Then, the soil pots were incubated at 20 degrees C and the soil humidity was kept at a level of 20%. After 3 weeks of a batch incubation, the potentially phytoavailable Cd was reduced up to a factor of 14. The bioaugmentation resulted in the soil colonization by Bacillus sp. thanks to an increase of the cell concentration up to 1.8 log units. However, in comparison to the cells being inoculated in a free mode, the immobilization of the cells did not significantly improve the survival of the cells in the soil. Although the resulting effect not being highly pronounced, the potentially phytoavailable Cd correlated with the cell concentration in a surprisingly positive way. What is more, the Bacillus concentrations in the soil were positively correlated with the inoculum, too.