Effects of flow regime and flooding on heavy metal availability in sediment and soil of a dynamic river system

The acid volatile sulphide (AVS) and simultaneously extracted metals (SigmaSEM) method is increasingly used for risk assessment of toxic metals. In this study, we assessed spatial and temporal variations of AVS and SigmaSEM in river sediments and floodplain soils, addressing influence of flow regime and flooding. Slow-flowing sites contained high organic matter and clay content, leading to anoxic conditions, and subsequent AVS formation and binding of metals. Seasonality affected these processes through temperature and oxygen concentration, leading to increased levels of AVS in summer at slow-flowing sites (max. 37micromolg(-1)). In contrast, fast-flowing sites hardly contained AVS, so that seasonality had no influence on these sites. Floodplain soils showed an opposite AVS seasonality because of preferential inundation and concomitant AVS formation in winter (max. 3-30micromolg(-1)). We conclude that in dynamic river systems, flow velocity is the key to understanding variability of AVS and SigmaSEM.     

Comparison of manufactured and black carbon nanoparticle concentrations in aquatic sediments

In this paper, we show that concentrations of manufactured carbon-based nanoparticles (MCNPs) in aquatic sediments will be negligible compared to levels of black carbon nanoparticles (BCNPs). This is concluded from model calculations accounting for MCNP sedimentation fluxes, removal rates due to aggregation or degradation, and MCNP burial in deeper sediment layers. The resultant steady state MCNP levels are compared with BCNP levels calculated from soot levels in sediments and weight fractions of nanosized fractions of these soot particles. MCNP/BCNP ratios range from 10⁻⁷ to 10⁻⁴ (w:w). This suggests that the often acclaimed effect of MCNPs on organic pollutant binding and bioavailability will likely be below the level of detection if natural BCNPs are present, even if binding to MCNP is one to two orders of magnitude stronger than to BCNPs. Furthermore, exposure and toxic effects of MCNPs in sediments and soils will be negligible compared to that of BCNPs.     

Temporal variation of trace metal geochemistry in floodplain lake sediment subject to dynamic hydrological conditions

Climate change and land use may significantly influence metal cycling in dynamic river systems. We studied temporal variation of sediment characteristics in a floodplain lake, including concentrations of dissolved organic carbon, acid volatile sulfide and trace metals. The sampling period included a severe winter inundation and a dramatic water level drop during summer. Temporal changes were interpreted using multivariate analysis and chemical equilibrium calculations. Metal concentrations in sediment increased with depth, indicating a gradual improvement of sediment quality. In contrast, dissolved metal concentrations were highest in top layers due to mobilization from oxyhydroxides and precipitation with sulfides in deeper layers. Inundation had a mobilizing effect as it stimulated resuspension and oxygenation of sediment top layers. Water table lowering combined with organic matter decomposition led to immobilization due to sulfide formation. The chemistry of the sediments was consistent with model calculations, especially for macro-elements. The results illustrate the importance of seasonality for metal risk assessment.     

Modeling polychlorinated biphenyl sorption isotherms for soot and coal

Sorption isotherms (pg-ng/L) were measured for 11 polychlorinated biphenyls (PCBs) of varying molecular planarity from aqueous solution to two carbonaceous geosorbents, anthracite coal and traffic soot. All isotherms were reasonably log-log-linear, but smooth for traffic soot and staircase-shaped for coal, to which sorption was stronger and more nonlinear. The isotherms were modeled using seven sorption models, including Freundlich, (dual) Langmuir, and Polanyi-Dubinin-Manes (PDM). PDM provided the best combination of reliability and mechanistically-interpretable parameters. The PDM normalizing factor Z appeared to correlate negatively with sorbate molecular volume, dependent on the degree of molecular planarity. The modeling results supported the hypothesis that maximum adsorption capacities (Q_max) correlate positively with the sorbent’s specific surface area. Q_max did not decrease with increasing sorbate molecular size, and adsorption affinities clearly differed between the sorbents. Sorption was consistently stronger but not less linear for planar than for nonplanar PCBs, suggesting surface rather than pore sorption.     

Effects of black carbon on bioturbation-induced benthic fluxes of polychlorinated biphenyls

It is unknown whether carbonaceous geosorbents, such as black carbon (BC) affect bioturbation by benthic invertebrates, thereby possibly affecting sediment-water exchange of sediment-bound contaminants. Here, we assess the effects of oil soot on polychlorinated biphenyl (PCB) mass transfer from sediment to overlying water, for sediments with and without tubificid oligochaeta as bioturbators. PCB levels were so low that toxicity to the oligochaeta played no role, whereas soot levels and binding affinity of PCBs to soot were so low that pore water PCB concentrations were not significantly affected by binding of PCBs to soot. This setup left direct effects of BC on bioturbation activity as the only explanation for any observed effects on mass transfer. Mass transfer coefficients (K_L) for benthic boundary layer transport were measured by a novel flux method using Empore™ disks as a sink for PCBs in the overlying water. For the PCBs studied (logK_ow 5.2-8.2), K_L values ranged from 0.2 to 2 cm × d⁻¹ in systems without tubificids. Systems with tubificids showed K_L values that were a factor of 10-25 higher. However, in the presence of oil soot, tubificids did not cause an increase in mass transfer coefficients. This suggests that at BC levels as encountered under field conditions, the mechanism for reduction of sediment-water transfer of contaminants may be twofold: (a) reduced mass transfer due to strong binding of the contaminants to BC, and (b) reduced mass transfer of contaminants due to a decrease in bioturbation activity.     

Black carbon: the reverse of its dark side

The emission of black carbon is known to cause major environmental problems. Black carbon particles contribute to global warming, carry carcinogenic compounds and cause serious health risks. Here, we show another side of the coin. We review evidence that black carbon may strongly reduce the risk posed by organic contaminants in sediments and soils. Extremely efficient sorption to black carbon pulls highly toxic polycyclic aromatic hydrocarbons, polychlorinated biphenyls, dioxins, polybrominated diphenylethers and pesticides into sediments and soils. This increased sorption is general, but strongest for planar (most toxic) compounds at environmentally relevant, low aqueous concentrations. Black carbon generally comprises about 9% of total organic carbon in aquatic sediments (median value of 300 sediments), and then may reduce uptake in organisms by up to two orders of magnitude. This implies that current environmental risk assessment systems for these contaminants may be unnecessarily safe.     

Sorption of organic compounds to activated carbons. Evaluation of isotherm models

Sorption to ‘hard carbon’ (black carbon, coal, kerogen) in soils and sediments is of major importance for risk assessment of organic pollutants. We argue that activated carbon (AC) may be considered a model sorbent for hard carbon. Here, we evaluate six sorption models on a literature dataset for sorption of 12 compounds onto 12 ACs and one charcoal, at different temperatures (79 isotherms in total). A statistical analysis, accounting for differences in the number of fitting parameters, demonstrates that the dual Langmuir equation is in general superior and/or preferable to the single and triple Langmuir equation, the Freundlich equation, a Polanyi–Dubinin–Manes equation, and the Toth equation. Consequently, the analysis suggests the presence of two types of adsorption sites: a high-energy (HE) type of site and a low-energy (LE) type of site. Maximum adsorption capacities for the HE domain decreased with temperature while those for the LE domain increased. Average Gibbs free energies for adsorption from the hypothetical pure liquid state at 298 K were fairly constant at −15 ± 4 and −5 ± 4 kJ mol⁻¹ for the HE and LE domain, respectively.     

Measuring acid volatile sulphide in floodplain lake sediments: effect of reaction time, sample size and aeration

For the routine measurement of acid volatile sulphide (AVS) in floodplain lake sediments, an earlier published diffusion method was adapted and optimised. We evaluated the effect of reaction time, sample weight and passive sample aeration on AVS recovery, and determined the method's reproducibility. The optimal reaction time was 4 h. Losses of AVS due to sample aeration did not occur within 15 min of sample-air contact. Relative standard deviation was <2.5% for known sulphide solutions, was between 10% and 15% for AVS concentrations in sediments and <12% for SEM concentrations in sediments, generally. Sediment samples with known SEM and AVS content were used to compare results of the developed method with the purge-and-trap method. There is a good agreement with the purge-and-trap method for SEM concentrations. AVS concentrations measured with the diffusion method are higher than with the purge-and-trap method. We conclude that the adapted diffusion method is well suited for the routine measurement of AVS concentrations in floodplain sediments.     

Sampling method, storage and pretreatment of sediment affect AVS concentrations with consequences for bioassay responses

Sediment treatment and sediment storage may alter sediment toxicity, and consequently biotic response. Purpose of our study was to combine these three aspects (treatment-toxicity-biotic response) in one integrated approach. We used Acid Volatile Sulfide (AVS) concentrations as a proxy of the disturbance of the sediment. AVS and Simultaneously Extracted Metal (SEM) concentrations were compared to bioassay responses with the freshwater benthic macroinvertebrate Asellus aquaticus. Storage conditions and sediment treatment affected AVS but not SEM levels. AVS can be used as a proxy for sediment disturbance. The best way to pretreat the sediment for use in a bioassay in order to maintain initial AVS conditions was to sample the sediment with an Ekman grab, immediately store it in a jar without headspace, and freeze it as soon as possible. In a survey using seven different sediments, bioassay responses of A. aquaticus were correlated with SEM and AVS characteristics.     

Temperature dependency of chlorobenzene bioaccumulation in phytoplankton

Chlorobenzene bioconcentration factors for Scenedesmus spp measured by batch equilibration, increased with temperature between 4.5 and 27.6 °C. A thermodynamic analysis suggests that the bioconcentration is driven by an entropy gain. Slopes of LogBCF-logK_ow relationships increased with temperature. These results agree with earlier reports for the analogous bioconcentration to fish.