Optical fiber based methodology for assessment of thiocyanate in seawater

A new methodology for the assessment of thiocyanate (SCN(-)) is proposed based on optical fiber (OF) detection coupled to a liquid chromatography system (LC). The developed methodology showed an adequate performance for the analysis of SCN(-) comparable to a high performance liquid chromatography with UV detector (HPLC-UV) methodology: a detection limit of 3 μg L(-1), a linear range from 4 to 400 μg L(-1), and an analytical time of less than 6 min. The OF based methodology was of compact design and easy operation. This simple system has the potential to be used as a sensing approach for SCN(-) in seawater.     

Municipal solid waste shear strength parameters defined through laboratorial and in situ tests

This paper presents the parameters of municipal solid waste shear strength determined in the laboratory (triaxial tests) and by in situ tests: standard penetration tests (SPT) and cone penetration tests (CPT). The results analyzed here are part of a study carried out on the Santo Tirso landfill (north of Portugal) between 2001 and 2007. The influence of the strain levels, waste composition, and waste age on the shear strength parameters is presented, as well as an attempt to establish some correlations between the SPT and CPT tests and to estimate municipal solid waste (MSW) friction angles from the SPT tests. The results indicate that the aging of the waste, which is characterized by a decrease in fibrous and organic materials and an increase in inert materials and fine fraction, leads to an increase in frictional resistance and to a decrease in cohesion. The results of the SPT and CPT tests indicate higher penetration resistance in older and deeper waste. Estimating the frictional resistance from the SPT test seems to obey an empirical relationship expressed by a power function, which depends on the strain level.

Implications: Comparison of shear strength parameters of municipal solid waste (MSW) determined through laboratory (triaxial tests) and in situ tests (SPT and CPT) showed that the greater amount of fibrous and granular elements leads to an increase in “cohesion” and in friction angle values, respectively. Waste aging results in an increase in frictional resistance and in a decrease in “cohesive” resistance. This is consistent with the composition changes with aging: increase of the relative quantity of inert materials and fine fraction, and decrease in particle size, in organic matter content, and in fabrics and plastics.     

Effects of tertiary treatment by fungi on organic compounds in a kraft pulp mill effluent

Background, aim and scope  

Pulp and paper mills generate a plethora of pollutants depending upon the type of pulping process. Efforts to mitigate the environmental impact of such effluents have been made by developing more effective biological treatment systems in terms of biochemical oxygen demand, chemical oxygen demand, colour and lignin content. This study is the first that reports an evaluation of the effects of a tertiary treatment by fungi (Pleurotus sajor caju, Trametes versicolor and Phanerochaete chrysosporium and Rhizopus oryzae) on individual organic compounds of a Eucalyptus globulus bleached kraft pulp and paper mill final effluent after secondary treatment (final effluent).     

Electrochemical wastewater treatment: influence of the type of carbon and of nitrogen on the organic load removal

Boron-doped diamond (BDD) and Ti/Pt/PbO₂ anodes were utilized to perform the electrodegradation of synthetic samples containing humic acid in the presence of different organic and inorganic carbon-containing and nitrogen-containing compounds. The influence of the chloride ion in the degradation process of the different synthetic samples was also assessed. The results showed that the anodic oxidation process can efficiently degrade recalcitrant compounds such as humic acid. The presence of carbonate in solution enhances the nitrogen removal, whereas it hinders the oxidation of the organic compounds. When organic nitrogen is present, it is converted to NH₄ ⁺, which in turn is oxidized to nitrate and to volatile nitrogen compounds. Hydroxyl radicals are more prone to oxidize the organic nitrogen than the ammonium nitrogen. The presence of chloride enhances the organic matter and nitrogen removal rates, BDD being the anode material that yields the highest removals.     

Treatment of tannery effluent by chemical coagulation combined with batch-recirculated electro-oxidation at different anode materials

Environmental Science and Pollution Research - The aim of this work was to evaluate the pollutant load from tannery effluents treated by chemical coagulation (CC) followed by electro-oxidation...     

Land cover along hiking trails in a nature tourism destination: the Azores as a case study

Environment, Development and Sustainability - Tourists have become increasingly interested in certain aspects of their destination, including landscape and biodiversity elements, thereby promoting...     

Diclofenac photodegradation with the Perovskites BaFeyTi1-yO3 as catalysts

Environmental Science and Pollution Research - Perovskite oxides BaFeyTi1-yO3, with y = 0, 0.6, 0.8 and 1, were prepared by ceramic (CM) and complex polymerization methods (CPM) and utilized in...     

Educating citizens about their coastal environments: beach profiling in the Coastwatch project

The Coastwatch (CW) project is aimed at monitoring the coastline with the involvement of volunteers. Between 2003 and 2007 a beach profiling method was informally proposed to CW participants in Portugal as an extra activity to include in the surveys. Beach profiling contributes to a better understanding of coastal processes by providing quantitative information on the spatial/temporal evolution of beaches, which is crucial for coastal management. The profiling method proposed to the CW project is based on the physical principle of communicating vessels, and only requires a simple and inexpensive homemade ??profiler??. The simplicity of putting together and using the profiler, added to the arithmetic straightforwardness of data analysis, makes this method adequate for several kinds of users and for most levels of education. Eight workshops were held that included a classroom explanation of the method, the construction of a profiler, the actual profiling of a beach, and a final classroom session of data processing and graphing. About 140 participants received such training, and several among them independently undertook beach profiling. Surveyed participants found the workshop and the beach profiling method interesting and useful, and considered it a valuable tool for teaching and for management. External stakeholders (coastal managers) highlighted the importance of beach profiling data for management decisions and considered that this method produces robust data, even when carried out by volunteers. Further advantages of the application of the method, in the context of coastal management initiatives, for scientists, managers, and volunteers are discussed.     

Relationship between geographical origin and contents of Pb,Cd, and Cr in honey samples from the state of Paraná (Brazil) with chemometric approach

The aim of this study was to determine the trace elements, Pb, Cd, and Cr in honey samples from eight different regions from the state of Paraná (Brazil), using slurry sampling graphite furnace atomic absorption spectrometry. Chemometric analysis (principal component analysis (PCA)) was applied to classify honey samples according to their levels of the trace elements Pb, Cd, and Cr, which is also related to the geographical origin of honey samples. The mean concentration for the elements followed the order Pb?>?Cr >?>?Cd. The mean values were 200?±?76, 88?±?14, and 4.1?±?4 ng g^?1 for Pb, Cr, and Cd, respectively. It could be verified that honey samples are geographically separated, especially with regard to Pb and Cd contents. Thus, honey can be considered a bioindicator of environmental contamination, suggesting possible contamination in soil, water, and air. This contamination can be related to natural or anthropogenic sources present in the study regions.